Bid Board
1,248 live construction bids & tenders
Open opportunities from government portals across the US, UK, and Canada — plus projects posted by contractors on Constructeams. Filter by trade and location, then connect bid activity back to your workspace. Free to browse; create a free account to save searches, respond, and get alerts.
New Building Projects - General Construction
The New York City (the City) Department of Parks and Recreation (Parks or the Agency) is in the process of establishing a pre-qualified list (PQL) of general contractors for furnishing all labor, materials and equipment, necessary and required to perform general construction work for the construction of new buildings (New Buildings) on NYC parklands. The estimated construction cost for these New Building projects is $2,000,000 - $6,000,000. For further details and to apply to be on the PQL please search for PQL000152. https://passport.cityofnewyork.us/page.aspx/en/sup/pql_browse_public
Small Building Projects - General Construction
The New York City (the City) Department of Parks and Recreation (Parks or the Agency) is in the process of establishing a pre-qualified list (PQL) of general contractors for furnishing all labor, materials, and equipment, necessary and required to perform general construction work for reconstruction of small building projects located at Parks properties (Small Buildings). The estimated construction cost for these Small Buildings projects will not exceed $3,000,000. For further details and to apply to be on the PQL please search for PQL000136. https://passport.cityofnewyork.us/page.aspx/en/sup/pql_browse_public
NG SEW-ELECTRICAL COMPONENTS
Electrical Components for the Next Generation Shop Equipment Welding (NG SEW): Channel Strut, Circuit Breaker Load Center, Flexible Conduit, Electrical Cable
Provision of Cable Installation Services for Canada’s Diplomatic and Consular Missions
The Department of Foreign Affairs, Trade and Development (DFATD) is responsible for the planning, delivery, operation, and maintenance of Canada's diplomatic missions abroad and provides comprehensive project management services for new construction, leases, and the development or renovation of existing properties. As part of this mandate, DFATD requires cabling services at Canadian missions abroad, including the supply and installation of low-voltage cabling and associated equipment. The procurement process will be conducted in two phases, with this Notice of Proposed Procurement (NPP) constituting the first phase. During the second phase, interested suppliers may request the Invitation to Qualify (ITQ) document from the Contracting Advisor, as the ITQ will not be posted on CanadaBuys or otherwise made publicly available. To obtain the ITQ document, interested suppliers must submit a request to the Contracting Advisor, Brent Hygaard, at realproperty-contracts@international.gc.ca, with solicitation number 24-259558 in the subject line. Firms already on the source list do not need to requalify and will remain on the source list for its duration.
FY27 Mentor Protege Program (MPP) Broad Agency Announcement
1.0 Introduction & Program Overview Mentor-Protégé Program: The Department of War (DOW) Mentor-Protégé Program (MPP) is a premier business development initiative designed to incentivize large prime contractors to provide developmental assistance to small businesses. The primary goal is to enhance the capabilities of Protégés, enabling them to become more competitive and expand their presence in the Defense Industrial Base (DIB). Through this mutually beneficial partnership, Protégés gain valuable technical and business expertise, while the DoD cultivates a broader, more resilient supplier network to support its mission. 2.0 MPP Broad Agency Announcement (BAA) BAA Management and Agreement Execution: The Office of Small Business Programs & Industry Engagement (OSBP&IE) manages this Broad Agency Announcement (BAA) and is the primary point of contact for submissions and review. Opportunity Description: Opportunity Name: FY27 Mentor-Protégé Program (MPP) Agreement Call Opportunity Number: Refer to posting Opportunity Type: This is a 2-phase submission. Phase 1: White Paper submissions must be received no later than 5 p.m. Eastern Time (ET), 30 days after the announcement date. Phase 2: Final Proposal requests will only be issued to selected White Paper submissions based on the evaluation criteria. Selected submitters will receive a Request for Proposal (RFP) for their Phase 2 response. Dates: White Paper submissions must be submitted via email to the DCSA MPP Program Manager and the MPP Intermediary no later than 5:00 p.m. Eastern Time (ET), 30 calendar days from the BAA announcement date. Submissions received after this deadline will not be considered until a subsequent evaluation cycle. The Broad Agency Announcement (BAA) remains open, and White Papers are accepted on a rolling basis throughout the year. However, submissions are reviewed according to the following quarterly review cycle: · Review Cycle I – March 29: White Papers submitted on or before March 29 will be reviewed immediately following this date. · Review Cycle II – June 30: White Papers submitted after March 29 or before June 30 will be reviewed after June 30. · Review Cycle III – September 30: White Papers submitted after June 30 or before September 30 will be reviewed after September 30. · Review Cycle IV – December 31: White Papers submitted after September 30 or before December 31 will be reviewed after December 31. · Review Cycle V – March 31: White Papers submitted after December 31 or before March 31 will be reviewed after March 31. Submission Address: All White Papers are to be submitted by email (Subject: FY27 MPP Mentor-Protégé Agreement – (Insert Mentor & Protégé Name). All submissions will be acknowledged with an email confirmation within 24 hours of receipt. If a confirmation email is not received within 48 hours, please follow up to ensure delivery. The Government is not responsible for email system malfunctions or undeliverable email. BAA Submission Process: Phase I. White Paper Submission (Attachment 1): Firms respond to this Open Call by submitting a white paper summarizing technical and cost information. Phase II. Final Proposal Submission: After successful evaluation of white papers, selected firms provide a full Technical Proposal, Cost Proposal (Attachment 2), and Letters of Endorsement. The proposal will be reviewed for allowability, allocability, and reasonableness. Protégé Pilot Initiative (PPI) Application (Attachment 3): The Department of War (DOW) Pilot Protégé Initiative (PPI) was established under Pub. L. 117-63, div. A, title VIII, §856 (d), Dec. 23, 2022, 136 Stat, 2726. This pilot initiative provides Proteges in DOW reimbursable agreements an opportunity to propose projects supporting the advancement of engineering, software development, or manufacturing customization in support of the War Fighter. Proposals are limited to a maximum of up to 25% of the annual budget of the respective reimbursable agreement. The proposed amount will be used exclusively by Protégé for the project. PPI applications are due in Phase II with the final proposal. 3.0 Mentor-Protégé Program MPP Objective & Benefits: To leverage Mentor-Protégé Agreements (MPAs) to mature Protégé firms for its critical mission spaces. By incentivizing Mentors to provide technical assistance, the agency aims to integrate high-capability small businesses into the Defense Industrial Base. This expansion directly strengthens national security by ensuring a resilient, value-added supply chain capable of safeguarding sensitive defense assets. 4.0 Participation Requirements Protégé Firm Eligibility: Small business concerns eligible for federal contracts. Meet SBA size standards. Must satisfy one of the following: HUBZone, Women-Owned, Service-Disabled Veteran-Owned, Native American/Hawaiian controlled, socially/economically disadvantaged, employing severely disabled individuals, nontraditional defense contractors, or contributing to national security priorities. Mentor Firm Eligibility: Prime contractors with $25M or more in DOW contracts in the last fiscal year. Active DOW subcontracting plan. Financially sound, good character, not debarred/suspended or under investigation. Approved by DOW OSBP as a Mentor. Note: Active SAM.gov registration is mandatory for all vendors, mentors, protégés, and subcontractors at the time of package submission. 5.0 Technical Priorities The core technical priorities are structured around modernizing technology, integrating data, and securing IT infrastructure: 1- Modernizing IT Infrastructure and Cloud Optimization National Background Investigation Services (NBIS): A primary focus is accelerating the delivery of NBIS to transform personnel vetting, including full transition to NBIS for Personnel Vetting operations including background investigations. Cloud Migration: Transitioning systems, such as the Defense Information System for Security (DISS), to a secure, self-hosted cloud environment and transforming it to enhance scalability and agility. System Modernization: Replacing legacy, slow-performing and siloed systems with modern, high performing components based on the DoW mandated Modular Open Systems Architecture (MOSA) approach. 2- Data Integration and Advanced Analytics Data-Driven Decision Making: Enhancing data understanding, delivery, and management to enable faster, more accurate risk determinations in personnel and industrial security. AI and Machine Learning: Implementing a variety of Artificial Intelligence (AI) capabilities to analyze large volumes of data, identify anomalies, and calculate potential risks while keeping human judgment at the center of trust decisions. Automated Data Ingestion: Developing tools to automatically ingest data, improving the speed and quality of background investigations. 3- Cyber and Industrial Security Securing the Defense Industrial Base: Protecting cleared facilities and IT systems from cyber-attacks, foreign insider threats, and vulnerabilities. Behavioral Threat Analysis Capability (BTAC): Enhancing capabilities to detect insider threats through advanced behavioral monitoring. Zero Trust Architecture: Strengthening cyber posture through modern, secure IT solutions that protect sensitive national security information. 4- Digital Workforce and Governance Digital Skills Training: Empowering a skilled digital workforce, including expanding AI experience and cybersecurity awareness. IT Governance: Establishing enterprise-wide IT, data, and cybersecurity governance to ensure compliance and efficiency. 6.0 Scope of Work Allowable Developmental Assistance: Refer to DFARS Appendix I, paragraph I-106 for specific guidelines regarding allowable developmental assistance. Mentors can use authorized subcontractors to provide developmental assistance to proteges. Authorized subcontractors include Historically Black Colleges and Universities (HBCUs), Minority Serving Institutions (MSIs), APEX Accelerators (formerly Procurement Technical Assistance Centers (PTACs), Manufacturing Innovation Institutes (MIIs), and Small Business Development Centers (SBDCs). Types of developmental assistance include, but are not limited to: Technical/Engineering Assistance: Technology transfer, certifications, quality processes, manufacturing improvements. Business Development Assistance: HR, accounting, marketing, safety, and company policies. Federal Contract Language Training: FAR/DFARS compliance assessment and workshops. Facility Clearance (FCL) Sponsorship & Guidance: Establish a formal process to assist the protégé in obtaining and maintaining a facility clearance to be eligible for classified contracts. Personnel Security & FSO Training: Provide templates, policies, and coaching for running a compliant Facility Security Officer (FSO) program and managing cleared staff. Cybersecurity Compliance (DFARS/NIST/CMMC): Train the protégé to build a secure IT/cyber program, share assessment tools, and prepare them for audits. Insider Threat & Counterintelligence Program Setup: Provide insider threat program templates, reporting procedures, and exercises on recognizing suspicious activities. Defense Contract Audit Agency (DCAA) Compliant Accounting & Contracting Knowledge: Help the protégé set up a compliant accounting system, understand cost/pricing rules, and manage contracts. Proposal Development Support: Share sample proposals, compliance checklists, and proposal writing strategies tailored to DCSA/DOW opportunities. Foreign Ownership Control and Influence (FOCI): To work with U.S. companies must identify and implement FOCI mitigation strategies, which are evaluated before final proposals are submitted. Information Technology Systems Enhancement: Upgrading hardware, software, and network infrastructure to improve performance, security, and scalability. Note: Cybersecurity compliance (NIST SP 800 / CMMC Level I) is not reimbursable. However, DOW OSBP encourages companies to seek the services of Project Spectrum (https://www.projectspectrum.io) for CMMC Level 1 at no cost. 7.0 Proposal & Evaluation Process Phase I. White Paper Submission: Requirements: Complete the white paper template (Attachment 1) including a White Paper Submission (Attachment 1): Firms respond to this Open Call by submitting a white paper summarizing technical and cost information. Formatting: 15 pages max, 12-pt font, Word/Excel/PDF formats (Letters of endorsement excluded). Note: Email is for unclassified use only. For assistance with classified communications, please reach out to the contact above through an unclassified email first. Evaluation Criteria: Alignment with National Security and DOW priorities Alignment with DCSA strategic plan and mission Technical approach and developmental assistance Cost reasonableness Letters of Endorsement from CEOs (Pass/Fail) FOCI Questionnaire (Pass/Fail) Statement of Mentor and Protégé eligibility Engineering and Technical Assistance is 50% or more of the overall proposed costs (Pass/Fail) HBCU/MSI/APEX/SBDC/WBC/MEP Involvement (Pass/Fail) Selection Notification for Phase II: The MPP-I will notify offerors of their white paper evaluation results. Please note that debriefs or feedback regarding Step-One submissions will not be provided. Selected participants will receive an official invitation via email to proceed to Phase II. However, this invitation does not guarantee an award, as all selections are contingent upon successful negotiations and the availability of funds. Do not submit formal proposal materials until a specific request is received. 8.0 Phase II. Final Proposal Submission & Award Final Proposal Requirements: Invited offerors must submit a final proposal (updated white paper) within 30 calendar days of notification, unless an extension is granted. This submission must include a Statement of Work, a comprehensive technical approach for technology transfer, and a fully disclosed cost proposal aligned to a work breakdown structure. The proposal must demonstrate alignment with DCSA strategic objectives and detail the involvement of HBCU/MSI/SBDC/APEX/MII organizations. Additionally, signed Letters of Endorsement and Commitment from both Mentor and Protégé leadership are required. Final agreements will be issued as subawards under the DOW OSBP MPP-I Cooperative Agreement. Optional: Protégé Pilot Initiative (PPI) Application: The PPI application (Attachment 3) provides an opportunity for Protégés to propose projects supporting the War Fighter. Proposals are limited to a maximum of 25% of the annual budget of the reimbursable agreement. Applications are due with the final proposal. Evaluation and Award Notification: The evaluation criteria for the formal proposal are the same as for the Phase I white paper. Following the evaluation of submissions, selected organizations will be notified of their acceptance into the Mentor-Protégé Program via both a phone call and an official email. Note: Specific requirements of the proposal will be outlined in the request for proposal. 9.0 Agreement Administration & Terms Award Details and Period of Performance: Reimbursable Mentor-Protégé Agreement contracts will follow a structured invoice and payment schedule. Instructions will be provided upon Agreement Award. The total Period of Performance for any proposal is capped at three (3) years/36 months. Typically, standard agreements entail a 12-month base Period of Performance with the option for two (2) additional 12-month periods, subject to the discretion of the Government. Note: This BAA is soliciting Reimbursable agreements only, no Credit or Hybrid agreements will be accepted. Cost, Reimbursement, and Liability: All costs associated with preparing and submitting white papers, draft proposals, or final agreement proposals are the sole responsibility of the Mentor and Protégé. The Government will not reimburse or be liable for any expenses incurred. Government Rights and Termination Clauses: The Government reserves the right to review an MPA at any time. The Government may modify, suspend, or terminate an MPA for reasons including, but not limited to, lack of progress, non-compliance, or if it is no longer in the Government's best interest. Mentors and protégés may also initiate termination per DFARS Appendix I. Termination, suspension, or modification will not give rise to any claim for damages. Written notice will be provided; however, the Government reserves the right to withhold specific details related to the reason(s) stated. Instructions for termination by the Mentor or Protégé will be included in the MPA contract. 10.0 Resources: (Links within the attachment) DoW OSBP Mentor-Protégé Program DFARS Appendix I DOW Small Business Strategy DOW Software Modernization Strategy DOW Cyber Strategy Summary 11.0 Attachments (3): White Paper Template Detailed Cost Estimate Template PPI Application Template 12.0 List of Acronyms Acronym Meaning AI Artificial Intelligence CDSE Center for Development of Security Excellence CI Counterintelligence CMMC Cybersecurity Maturity Model Certification CUI Controlled Unclassified Information DCSA Defense Counterintelligence and Security Agency DIB Defense Industrial Base DISA Defense Information Systems Agency DOD Department of Defense DMDC Defense Manpower Data Center DOW Department of War ESC Executive Steering Council FOCI Foreign Ownership, Control, or Influence HBCU Historically Black Colleges and Universities IT Information Technology MEP Manufacturing Extension Partnership MII Manufacturing Innovation Institutes MPA Mentor Protégé Agreement MPP Mentor Protégé Program MPP – I Mentor Protégé Program Intermediary MSI Minority Serving Institutions NBIS National Background Investigation Services NISP National Industrial Security Program OSBP Office of Small Business Programs PPI Protégé Pilot Initiative SBDC Small Business Development Center TW Trusted Workforce USG United States Government WBC Women’s Business Centers Notice of Government Rights: The Government reserves the right to amend, modify, suspend, or cancel this Broad Agency Announcement, in whole or in part, at any time and at its sole discretion.
Environmental Science and Engineering Contract, A-E Services to be Ordered on Indefinite-Delivery, Indefinite-Quantity Schedule
THIS SOURCES SOUGHT NOTICE HAS BEEN UPDATED, SEEKING SF330 SUBMITALS. THERE IS NO RFP PACKAGE TO DOWNLOAD. ALL INFORMATION NEEDED TO SUBMIT SF330 DOCUMENT IS CONTAINED HEREIN. SF 254S AND SF 255S WILL NOT BE CONSIDERED. NOTE: FAR PART 12 (COMMERCIAL) IS NOT APPLICABLE TO THIS PROCUREMENT. SUMMARY: The Naval Facilities Engineering and Expeditionary Warfare Center (NAVFAC EXWC), Port Hueneme, California is soliciting SF330s for a single-award, Indefinite Delivery Indefinite Quantity (IDIQ), Architect and Engineering (A-E) contract for various environmental restoration (ER) and other environmental projects. The A-E services required will include professional services to enable NAVFAC EXWC to support other NAVFAC commands, as well as other Department of War (DoW) and federal agencies. Market research was conducted in May 2026 and there were too few qualified small businesses to warrant consideration of a set-aside, therefore this acquisition is being issued under Full and Open Competition. The North American industry Classification System (NAICS) code is the procurement 541330, and the annual size standard is $25,500,000. NAVFAC EXWC anticipates the award of an IDIQ with base ordering period of sixty (60) months, and an extension of services period not to exceed six months. The maximum value of all task order placed under this contract will not exceed $150,000,000. Individual task orders under this contract may be firm fixed price (FFP) (Estimated 40%) or cost-plus-fixed fee (CPFF) (Estimated 60%). The minimum guarantee for the IDIQ contract is $10,000. Individual task orders are anticipated to range $5,000 to $6,000,000 per task order. The estimated award date is March 2027. PROJECT INFORMATION: Firms must be capable of performing work on a wide variety of projects in Environmental Restoration (ER) and other environmental topics, in a manner that complies with federal, state, and local regulations and laws, and within timeframes required. This work will support the A-E services that NAVFAC EXWC provides to support the environmental cleanup of sites managed by the Department of the Navy and other federal agencies. Although, the majority of the work is expected to be in the continental United States, project sites could be worldwide. Specific needs will be determined based upon project requirements and as described in each task order’s Performance Work Statement or Statement of Work. A-E services required under this contract include, but are not limited to: - Environmental program development and implementation. Particularly, the contractor will support development and implementation of the Navy’s environmental restoration (ER) program, comprising the Installation Restoration (IR) and Munitions Response (MR) Programs in terms of the associated science and engineering, regulations, and policy - Research, development, testing, and evaluation (RDT&E) of innovative environmental technologies, techniques, and solutions, particularly for environmental restoration. - Planning and pilot-testing innovative environmental technologies, techniques, investigations, and solutions to support full-scale design. - Services for associated environmental programs, including remedy resilience, impacts of elevated sea water levels and extreme weather events, active range sustainability, sustainable water resources management, environmental compliance, energy efficiency, and natural resources management. The services at ER sites may involve supporting NAVFAC EXWC in the preparation, expert review, or optimization of preliminary assessments, site inspections, remedial investigations, feasibility studies, engineering evaluation/analysis (EECA), proposed plans, records of decision (RODs), remedial designs, sampling and analysis plans (SAPs) or Quality Assurance Project Plans (QAPPs), and five-year reviews for customers in the Department of the Navy and other federal agencies. These services may include site characterization, laboratory studies, and pilot testing with the aim of helping NAVFAC EXWC and its customers develop cost-effective full-scale designs and solutions for environmental projects. An important component of the services also is technology transfer (T2) to and training of the Department of the Navy and other federal agency personnel (and their contractors), who are engaged in ER or other environmental programs. Other environmental project areas may include (but are not limited to) remedy resilience, coastal flooding from seawater and groundwater, and extreme weather events, active range sustainability, sustainable water resource management, environmental compliance, energy efficiency, and natural resource management. For on-site investigations, firms must provide personnel with current health and safety training, as required by the Occupational Safety and Health Administration (OSHA) and adhere to all NAVFAC requirements for Health and Safety. Task orders will be issued with a project/site specific Scope of Work under the general scope of the contract. Typically, requests for proposals issued for individual task orders will include a general Scope of Work or a performance-based acquisition Performance Work Statement, location of work, character and extent of services required, technical requirements in addition to the requirements contained within Statement of Architect and Engineering Services (SAES). SELECTION CRITERIA: The selection criteria are listed below in descending order of importance. Items (1) thru (5) are primary criteria and (6) thru (7) are secondary criteria. Secondary criteria will only be used as 'tie-breakers' among technically equal firms. (1) Professional Qualifications: Professional Qualifications: The offeror shall provide no more than thirteen (13) resumes in Section E of the Standard Form (SF) 330. If more resumes are submitted than requested, then only the first thirteen will be considered. Providing less resumes is encouraged if provided personnel fulfill multiple roles. Experience that is not related to the work described in this solicitation should not be included. Resumes shall not be more than 2 pages each. Firms will be evaluated in terms of the general professional qualifications and technical competence in areas of work described in the "Project Information" section above. The evaluation of the resumes will consider education, training, registration, certifications, overall and relevant experience, and longevity with the firm. Projects that demonstrate successful optimization efforts that reduced project cost or time and added unique technical value, successful execution of projects where standards and methods for execution were not commonly accepted, or projects that had complex hydrogeological and regulatory site conditions will be given preference. Additionally, projects performed for the Navy or DoW as opposed to other federal agencies or other clients are preferred. Experience on the resumes should be within the last 8 years to be considered relevant. Resumes should be presented in the following three categories: Program Manager (PGM), Project Managers (PMs), and Subject Matter Experts (SMEs) in the technical areas listed above. The PGM and PMs should have a degree in engineering (environmental, civil, chemical, or related), or geological sciences, professional registrations in at least one state of the United States, and at least five (5) years of experience in managing programs or projects of similar size and complexity as expected in this contract. The states of registration and certification of relevant personnel must be included on each resume in Section E of SF 330. One PGM resume and two (2) PM resumes are required.The resumes will be rated more favorably when they demonstrate specialized experience and technical competence in the following areas: • Investigation and/or remediation of environmental media contaminated with emerging contaminants, particularly PFAS, especially projects executed for the Navy or DoW; • Investigation and/or remediation of environmental media contaminated with radiological compounds, especially projects executed for the Navy or DoW; • Experience with biological processes where advanced molecular biological tools were used for bioremediation and natural attenuation determination; • Experience with groundwater modeling to support contaminant fate and transport, design, and optimization of in-situ remediation projects; • Experience with design, technical support, or optimization of site investigation and remediation projects to address underwater sediment impacted with PCBs, PAHs, and/or heavy metals; • Experience with design, technical support, or optimization of site investigation and remediation projects to address vapor intrusion; • Experience with design, technical support, or optimization of site investigation and remediation projects related to DoW’s Munitions Response Program (MRP). • Experience with supporting science and engineering projects with innovative solutions for environmental restoration. This experience shall include projects aligned with the A-E services that NAVFAC EXWC provides to support the environmental cleanup of sites managed by the Department of the Navy and other federal agencies in compliance with federal, state, and local regulations and laws. Advanced degrees and exhibited technical depth and breadth of project experience in their specific fields will be favored for all SMEs. Section G may also include a matrix that displays the SME specialty, discipline, degree, years of experience, and state(s) of registration/certification in each of the specialized experience categories for each person on the proposed team. Resumes should indicate the project role (s) of the individual in their submission (whether PGM, PM, SME, or allied personnel). A minimum of seven (7) SME resumes are requested including: Emerging Contaminants SME, Radiological SME, Bioremediation SME, Groundwater Modeling SME, Sediment Management SME, Vapor Intrusion SME, and a MRP SME. In addition to the aforementioned personnel, three key allied personnel are also required for this contract and their resumes should be included as described here. These include one (1) resume each for: a certified industrial hygienist (CIH) accredited by the American Board of Industrial Hygiene (ABIH), an American Board of Health Physicists (ABHP) certified health physicist (CHP), and an experienced Contractor Quality Control Manager (CQCM). Roles of the 13 personnel whose resumes are presented should be clearly identified in the SF 330. (2) Specialized Experience and Technical Competence: Based on the projects presented in Section F of the Standard Form 330, firms will be evaluated in terms of specialize experience and technical competence of work specifically included in the project information section above. A project is defined as a single contract or task order. A project can also be defined as multiple task orders supporting one installation/facility or customer. Up to ten projects completed within the last 7 years from the date of the offeror’s proposal will to be considered. If more projects are submitted, the Navy will consider only the first ten (10). Projects will be rated more favorably when they demonstrate specialized experience and technical competence in the following areas: • Investigation and/or remediation of environmental media contaminated with emerging contaminants, particularly PFAS, especially projects executed for the Navy or DoW; • Investigation and/or remediation of environmental media contaminated with radiological compounds, especially projects executed for the Navy or DOW; • Experience with biological processes where advanced molecular biological tools were used for bioremediation and natural attenuation determination; • Experience with groundwater modeling to support contaminant fate and transport, design, and optimization of in-situ remediation projects; • Experience with design, technical support, or optimization of site investigation and remediation projects to address underwater sediment impacted with PCBs, PAHs, and/or heavy metals; • Experience with design, technical support, or optimization of site investigation and remediation projects to address vapor intrusion; • Experience with design, technical support, or optimization of site investigation and remediation projects related to DoW’s Munitions Response Program (MRP). • Experience with supporting science and engineering projects with innovative solutions for environmental restoration. This experience shall include projects aligned with the A-E services that NAVFAC EXWC provides to support the environmental cleanup of sites managed by the Department of the Navy and other federal agencies in compliance with federal, state, and local regulations and laws. Firms shall submit no more than two (2) page per project (size 12 Calibri with a minimum of 1” margins on the top, bottom, and sides). An organizational chart shall be provided and be no larger than 8.5” x 11”. In Section H, also indicate the estimated percentage of involvement in each project of each firm on the proposed team. (3) Past Performance. Demonstrate acceptable past performance on contracts that the firm has performed. In section H of the SF330, provide completed CPARS, for the same ten projects listed in Specialized Experience. If no CPAR exists, submit a completed Past Performance Questionnaire (PPQ’s) (Attachment A). If the CPAR is assessed at the IDIQ level, vice the task order level, PPQ’s may be submitted in lieu of the CPAR, if the IDIQ CPAR does not discuss the project/task order in sufficient detail. Ensure the contact number and, if applicable, the task order number are provided and the PPQ is signed. Selected projects must have been performed with the past seven years from the issuance of this synopsis. If PPQ’s are used, completion by the Contracting Officer’s Representative (COR), Government Project Manager, or equivalent role, is preferred. PPQ’s previously completed for other solicitations may be submitted, provided that the questions are substantially the same as those in Attachment A. Navy projects/contracts may be considered more relevant than other Department of War (DoW) agencies projects/contracts. DoW projects/contracts may be considered more relevant that state or local government or commercial project/contracts. There is no page limit for the submission of this criteria. (4) Capacity to Execute Multiple Task Orders within the Required Time: Capacity to Execute Multiple Task Order: The Government expects this IDIQ will result in an average of 14 task orders per year, most of which run two or three years. In section H of the SF330, demonstrate how the Offeror has conducted multiple task orders simultaneously, while maintaining quality and schedule, and how this additional workload will be inducted by the firm. The Offeror’s submission for this criteria is limited to two pages. (5) Small Business Participation: Small Business Participation: The Government will consider both the Offeror’s plan to include small businesses on this IDIQ contract, as well as the Offeror’s demonstrated levels of small and small disadvantaged businesses on past contracts. In Section H, provide a completed Attachment B, Small Business Participation and Commitment Strategy. Page limits are as listed in Attachment B. Large Business firms shall submit the most recent Individual Subcontract Report (ISR), or equivalent if required by state or local Government contracts, for each of the ten projects listed in the Specialized Experience and Technical Competence factor. If reports are not available, provide an explanation. If the successful Offeror is a large business concern, the firm will be required to submit a subcontracting plan with its price proposal. The anticipated prime and first tier overall small business participation rate for this acquisition (i.e. work to be performed by small businesses as the prime and/or subcontractors) is 20% of the contract value. Offerors are encouraged to exceed this percentage and seek meaningful levels of participation in each of the small business socioeconomic programs. The NAVFAC subcontracting program targets, expressed as a percentage of total subcontracted work are estimated: Small Business: 40%, HUBZone: 3%, Small Disadvantaged Business: 5%, Service-Disabled Veteran Owned Small Business: 3%, and Woman-Owned Small Business: 9%. There is no page limit for the submission of this criteria. (6) Geographic Location: The work to be performed under this contract may be worldwide, with a focus on DON installations in the United States and its territories In Section H of the SF330, discuss the office locations of the Prime Contractor that will be used to support this contract, and demonstrate, through past projects, the familiarity with the Navy Installations where work may be performed. The Offeror’s submission for this criteria is limited to two pages. (7) Volume of Work Awarded by the Navy or DoW during the Previous 12 Months: The Government will assess the volume of Navy or DoW work performed by each Offeror during the previous 12 Months. Firms will be ranked based on the least amount of work to the most amount of work, but the Government will not reject the overall most highly qualified firm solely in the interest of equitable distribution of contracts. No submission is required by the Offeror. The Government will obtain the data from SAM.gov Architect-engineer firms which meet the requirements described in this announcement are invited to submit a completed SF330 by the response date. Offerors that fail to submit an SF-330 will not be considered. Page limits, where stipulated, must be adhered to. SF330’s will be submitted electronically. At least one week prior to the closing date, offerors shall email NAVFAC_EXWC_ACQ732@us.navy.mil requesting an invitation to upload the SF330 in DoDSAFE. DoDSafe is similar to DropBox™. The site accepts files up to 8 GB and files ending with an extension of “.zip”.
RFQ-DH-100127 - Request for Qualifications (RFQ) for Affordable Housing Development - Closing: Continuous
The Los Angeles County (County) Board of Supervisors (Board) has directed a Land Bank Pilot Program (Pilot) to acquire vacant and underutilized properties throughout Los Angeles County to facilitate affordable housing development, particularly in areas experiencing, or at risk of, gentrification and displacement. Through the Pilot, the County has acquired, and will continue to acquire, parcels of land (Land Bank Sites) with the goal of reaching approximately five (5) total sites, including at le... Read More [https://camisvr.co.la.ca.us/LACoBids/BidLookUp/BidDetail?BidNumber=RFQ-DH-100127]
Mechanical Contractors Source List for Quick Response Tenders – CFB Edmonton, AB
Defence Construction Canada (DCC) is inviting contractors to apply to be placed on QRT source list(s) for work required by the Department of National Defence, at CFB Edmonton, AB. The source list will be in place for a period of three (3) years from date of source list establishment. Applications will be accepted for the following category of service(s): Mechanical (Plumbing & Heating); Project No. ED26SL01 DCC may utilize QRT’s for projects with an estimated value up to $500,000. Contractors that want to join a QRT source list, must submit their application by e-mail using the Source List application form. Attention: Brett Cooper Email address: Brett.Cooper@dcc-cdc.gc.ca Application forms sent by fax or mail will not be accepted. Interested contractors may request to join the SL at any time, subject to the SL terms and conditions. Upon receipt of a request, an administrative processing time of approximately 10 days is required to be included in this SL. However, DCC is requesting that interested contractors submit a request to join the SL as soon as possible, preferably by January 6, 2026. The language selected by the applicant for a QRT Source List will be the only language used for the tender documents, the contract documents and communication for all future tenders and during the execution of any resulting contract. The language selected will apply for the duration of the QRT Source List. This procurement is in accordance with the tendering procedures found in Chapter 5 of the Canadian Free Trade Agreement. Although a security clearance is not required to be added to a source list, contractors are advised that tenders and contracts under the QRT source list(s) may contain organization and personnel security requirements. Typically, the organization security requirement will be Designated Organization Screening (DOS) and reliability status for personnel. However more stringent requirement may apply such as Facility Security Clearance (FSC) at the level of SECRET with approved Document Safeguarding (DSC) with secret clearance for personnel. See the enclosed QRT Source List Terms and Conditions for additional information. Contracts put in place by DCC include measurable performance standards and requirements as detailed in form DCL81-Performance Evaluation Guidelines which is available at https://www.dcc-cdc.gc.ca/industry/forms. A contractor that receives an unacceptable or failing score may be removed from this Source List and received no further invitations under the SL. Contractors requiring more information are advised to contact the DCC site office by telephone at 780-266-1884 or email at Brett.Cooper@dcc-cdc.gc.ca. Bidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.
Electrical Contractors Source List for Quick Response Tenders – CFB Edmonton, AB
Defence Construction Canada (DCC) is inviting contractors to apply to be placed on QRT source list(s) for work required by the Department of National Defence, at CFB Edmonton, AB. The source list will be in place for a period of three (3) years from date of source list establishment. Applications will be accepted for the following category of service(s): Electrical; Project No. ED26SL03 DCC may utilize QRT’s for projects with an estimated value up to $500,000. Contractors that want to join a QRT source list, must submit their application by e-mail using the Source List application form. Attention: Brett Cooper Email address: Brett.Cooper@dcc-cdc.gc.ca Application forms sent by fax or mail will not be accepted. Interested contractors may request to join the SL at any time, subject to the SL terms and conditions. Upon receipt of a request, an administrative processing time of approximately 10 days is required to be included in this SL. However, DCC is requesting that interested contractors submit a request to join the SL as soon as possible, preferably by January 13, 2026. The language selected by the applicant for a QRT Source List will be the only language used for the tender documents, the contract documents and communication for all future tenders and during the execution of any resulting contract. The language selected will apply for the duration of the QRT Source List. This procurement is in accordance with the tendering procedures found in Chapter 5 of the Canadian Free Trade Agreement. Although a security clearance is not required to be added to a source list, contractors are advised that tenders and contracts under the QRT source list(s) may contain organization and personnel security requirements. Typically, the organization security requirement will be Designated Organization Screening (DOS) and reliability status for personnel. However more stringent requirement may apply such as Facility Security Clearance (FSC) at the level of SECRET with approved Document Safeguarding (DSC) with secret clearance for personnel. See the enclosed QRT Source List Terms and Conditions for additional information. Contracts put in place by DCC include measurable performance standards and requirements as detailed in form DCL81-Performance Evaluation Guidelines which is available at https://www.dcc-cdc.gc.ca/industry/forms. A contractor that receives an unacceptable or failing score may be removed from this Source List and received no further invitations under the SL. Contractors requiring more information are advised to contact the DCC site office by telephone at 780-266-1884 or email at Brett.Cooper@dcc-cdc.gc.ca. Bidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.
Open Construction Source List for 14 Wing Greenwood
Defence Construction Canada (DCC) is inviting contractors and suppliers to apply to be placed on an Open Construction Source List (OCSL) for commercial, residential, industrial, institutional, and civil work required by the Department of National Defence, at 14 Wing Greenwood (and its satellite sites in Nova Scotia) for three fiscal years (April 1, 2026, to March 31, 2029). Interested contractors and suppliers may request to be placed on the OCSL at any time. However, DCC is requesting that interested contractors and suppliers submit a request to be placed the OCSL as soon as possible, preferably by March 4, 2026. DCC will require ten (10) business days to process an application for the OCSL. Contractors and suppliers that want to be added to the OCSL, must submit a request through this MERX posting and therein indicate their preferred official language (English or French). IMPORTANT: Contractors and suppliers that were placed on the previous OCSL (April 1, 2023, to March 31, 2026) must re-apply to be placed on the OCSL for April 1, 2026, to March 31, 2029. The language selected by the applicant for this OCSL will be the only language used for the tender documents, the contract documents and communication for all future tenders and during the execution of any resulting contract. The language selected will apply for the duration of the OCSL. Faxed, mailed, or emailed submissions will not be accepted. The OCSL will be used to tender construction services (commercial, residential, industrial, institutional, civil) with an estimated value of $10 million and below. As "Opportunities to bid" arise, DCC will invite all contractors and suppliers on the OCSL to bid on the work. Contractors and suppliers will be invited electronically through MERX and may, at the discretion of DCC, be required to attend a site meeting prior to a tender closing. Tenders will close electronically through MERX. Contractors and suppliers who apply to be placed on the OCSL will require an active MERX account to submit electronic bids. Please contact MERX for information on how to open or reactivate an account. To bid on a tender call, a bidder must be registered on the OCSL used for the tender call. If the bidder's legal name does not appear on the OCSL, DCC may consider their bid to be non-compliant. If you change your business name, it is therefore very important that you notify DCC and consider making the change to your MERX account. DCC reserves the right, at its sole discretion, to: Continue using existing source lists that may already be in place for similar or related services such as existing Quick Response Tender (QRT) source lists, Establish other source lists for specific categories of construction services which may require different pre-qualification requirements, such as Quick Response Tender (QRT) source lists. Such other source lists will not be advertised through this OCSL. Such other source lists will be advertised openly on MERX on a case-by-case basis, Verify which contractors have submitted bids under the OCSL, verify if those that did not submit bids are still interested to be on the OCSL and remove from the OCSL those contractors that are no longer interested, Require additional pre-qualification requirements for any specific tenders done through the OCSL, Elect to post any tender openly on MERX in lieu of this OCSL if DCC deems that an open tender would provide the potential for more competition, Tenders may be set aside for Indigenous businesses in accordance with the Procurement Strategy for Indigenous Business (PSIB). In such cases, all contractors and suppliers on the Open Construction Source List (OCSL) will receive an invitation to bid; however, the MERX advertisement will clearly state that the opportunity is reserved for Indigenous businesses under PSIB. To qualify, the Indigenous business must be registered in Indigenous Services Canada’s (ISC) Indigenous Business Directory (IBD). If you are forming a Joint Venture (JV) to bid on a contract set aside for Indigenous businesses, at least one member of the JV must be listed on the OCSL, and the Indigenous business within the JV must also be registered in ISC’s Indigenous Business Directory. Failure to meet these requirements will result in the bid being deemed non-compliant, Include a requirement for sub-contracting to Indigenous businesses that must be registered under Indigenous Services Canada’s (ISC) Indigenous Business Directory. In this case, the MERX Ad specific to the invitation will clearly identify the inclusion of an Indigenous Benefits Plan (IBP). Contractors are advised that contracts awarded by DCC include measurable performance standards and requirements as detailed in form DCL81-Performance Evaluation Guidelines which is available at https://www.dcc-cdc.gc.ca/industry/forms. A contractor that receives an unacceptable or failing score may be removed from this OCSL and receive no further invitations under the OCSL. Contractors and suppliers are advised that all contracts tendered and awarded by DCC are subject to DCC’s Procurement Code of Conduct which is available for download at https://www.dcc-cdc.gc.ca/industry/forms. A contractor or a supplier that has been declared ineligible or has been suspended by Public Services and Procurement Canada under its Ineligibility and Suspension Policy and the period of ineligibility or suspension has not expired may be removed from this OCSL and received no further invitations. Contractors and suppliers are advised that DCC’s Standard Construction Contract Documents - Electronic Bidding (DCL250) will be used for opportunities under the OCSL and can be downloaded from the DCC website at: https://www.dcc-cdc.gc.ca/industry/forms. Contractors and suppliers are advised that tenders and contracts under this OCSL may contain organization and personnel security requirements. Typically, the organization security requirement will be Designated Organization Screening (DOS) and reliability status for personnel. However more stringent requirement may apply such as Facility Security Clearance (FSC) at the level of SECRET with approved Document Safeguarding (DSC) with secret clearance for personnel. DCC may publish Advance Procurement Notices (APN) identifying potential tenders with anticipated security requirements to provide interested contractors an opportunity to begin the sponsorship request process for potentially obtaining the required security clearance(s) that are anticipated. The process to apply for a security clearance is provided in the APNs. DCC reserves the right to reject any application that does not demonstrate, to the sole satisfaction of DCC, that the contractor or supplier has met the stated requirements. DCC also reserves the right to request clarifications and/or confirmations from any or all firms regarding any aspect of their submission information. A written response to each such communication is required from the firm. By submitting a response to this invitation, contractors and suppliers are providing their consent, pursuant to section 30 of the Defence Production Act, for DCC to publicly disclose, after closing, their legal name, address and whether they have been included on the OCSL. The OCSL may be used for procurements covered by trade agreements to which Canada is a party. You have questions regarding the foregoing, or you wish to be removed from an OCSL, please contact: Defence Construction Canada André Champagne Andre.Champagne@dcc-cdc.gc.caBidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.
Open Construction Source List for CFB Halifax
Defence Construction Canada (DCC) is inviting contractors and suppliers to apply to be placed on an Open Construction Source List (OCSL) for commercial, residential, industrial, institutional, and civil work required by the Department of National Defence, at CFB Halifax (and its satellite sites in Nova Scotia) for three fiscal years (April 1, 2026, to March 31, 2029). Interested contractors and suppliers may request to be placed on the OCSL at any time. However, DCC is requesting that interested contractors and suppliers submit a request to be placed the OCSL as soon as possible, preferably by March 4, 2026. DCC will require ten (10) business days to process an application for the OCSL. Contractors and suppliers that want to be added to the OCSL, must submit a request through this MERX posting and therein indicate their preferred official language (English or French). IMPORTANT: Contractors and suppliers that were placed on the previous OCSL (April 1, 2023, to March 31, 2026) must re-apply to be placed on the OCSL for April 1, 2026, to March 31, 2029. The language selected by the applicant for this OCSL will be the only language used for the tender documents, the contract documents and communication for all future tenders and during the execution of any resulting contract. The language selected will apply for the duration of the OCSL. Faxed, mailed, or emailed submissions will not be accepted. The OCSL will be used to tender construction services (commercial, residential, industrial, institutional, civil) with an estimated value of $10 million and below. As "Opportunities to bid" arise, DCC will invite all contractors and suppliers on the OCSL to bid on the work. Contractors and suppliers will be invited electronically through MERX and may, at the discretion of DCC, be required to attend a site meeting prior to a tender closing. Tenders will close electronically through MERX. Contractors and suppliers who apply to be placed on the OCSL will require an active MERX account to submit electronic bids. Please contact MERX for information on how to open or reactivate an account. To bid on a tender call, a bidder must be registered on the OCSL used for the tender call. If the bidder's legal name does not appear on the OCSL, DCC may consider their bid to be non-compliant. If you change your business name, it is therefore very important that you notify DCC and consider making the change to your MERX account. DCC reserves the right, at its sole discretion, to: Continue using existing source lists that may already be in place for similar or related services such as existing Quick Response Tender (QRT) source lists, Establish other source lists for specific categories of construction services which may require different pre-qualification requirements, such as Quick Response Tender (QRT) source lists. Such other source lists will not be advertised through this OCSL. Such other source lists will be advertised openly on MERX on a case-by-case basis, Verify which contractors have submitted bids under the OCSL, verify if those that did not submit bids are still interested to be on the OCSL and remove from the OCSL those contractors that are no longer interested, Require additional pre-qualification requirements for any specific tenders done through the OCSL, Elect to post any tender openly on MERX in lieu of this OCSL if DCC deems that an open tender would provide the potential for more competition, Tenders may be set aside for Indigenous businesses in accordance with the Procurement Strategy for Indigenous Business (PSIB). In such cases, all contractors and suppliers on the Open Construction Source List (OCSL) will receive an invitation to bid; however, the MERX advertisement will clearly state that the opportunity is reserved for Indigenous businesses under PSIB. To qualify, the Indigenous business must be registered in Indigenous Services Canada’s (ISC) Indigenous Business Directory (IBD). If you are forming a Joint Venture (JV) to bid on a contract set aside for Indigenous businesses, at least one member of the JV must be listed on the OCSL, and the Indigenous business within the JV must also be registered in ISC’s Indigenous Business Directory. Failure to meet these requirements will result in the bid being deemed non-compliant, Include a requirement for sub-contracting to Indigenous businesses that must be registered under Indigenous Services Canada’s (ISC) Indigenous Business Directory. In this case, the MERX Ad specific to the invitation will clearly identify the inclusion of an Indigenous Benefits Plan (IBP). Contractors are advised that contracts awarded by DCC include measurable performance standards and requirements as detailed in form DCL81-Performance Evaluation Guidelines which is available at https://www.dcc-cdc.gc.ca/industry/forms. A contractor that receives an unacceptable or failing score may be removed from this OCSL and receive no further invitations under the OCSL. Contractors and suppliers are advised that all contracts tendered and awarded by DCC are subject to DCC’s Procurement Code of Conduct which is available for download at https://www.dcc-cdc.gc.ca/industry/forms. A contractor or a supplier that has been declared ineligible or has been suspended by Public Services and Procurement Canada under its Ineligibility and Suspension Policy and the period of ineligibility or suspension has not expired may be removed from this OCSL and received no further invitations. Contractors and suppliers are advised that DCC’s Standard Construction Contract Documents - Electronic Bidding (DCL250) will be used for opportunities under the OCSL and can be downloaded from the DCC website at: https://www.dcc-cdc.gc.ca/industry/forms. Contractors and suppliers are advised that tenders and contracts under this OCSL may contain organization and personnel security requirements. Typically, the organization security requirement will be Designated Organization Screening (DOS) and reliability status for personnel. However more stringent requirement may apply such as Facility Security Clearance (FSC) at the level of SECRET with approved Document Safeguarding (DSC) with secret clearance for personnel. DCC may publish Advance Procurement Notices (APN) identifying potential tenders with anticipated security requirements to provide interested contractors an opportunity to begin the sponsorship request process for potentially obtaining the required security clearance(s) that are anticipated. The process to apply for a security clearance is provided in the APNs. DCC reserves the right to reject any application that does not demonstrate, to the sole satisfaction of DCC, that the contractor or supplier has met the stated requirements. DCC also reserves the right to request clarifications and/or confirmations from any or all firms regarding any aspect of their submission information. A written response to each such communication is required from the firm. By submitting a response to this invitation, contractors and suppliers are providing their consent, pursuant to section 30 of the Defence Production Act, for DCC to publicly disclose, after closing, their legal name, address and whether they have been included on the OCSL. The OCSL may be used for procurements covered by trade agreements to which Canada is a party. You have questions regarding the foregoing, or you wish to be removed from an OCSL, please contact: Defence Construction Canada André Champagne Andre.Champagne@dcc-cdc.gc.caBidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.
Open Construction Source List for 5 Wing Goose Bay
Defence Construction Canada (DCC) is inviting contractors and suppliers to apply to be placed on an Open Construction Source List (OCSL) for commercial, residential, industrial, institutional, and civil work required by the Department of National Defence, at 5 Wing Goose Bay (and its satellite sites in Newfoundland and Labrador) for three fiscal years (April 1, 2026, to March 31, 2029). Interested contractors and suppliers may request to be placed on the OCSL at any time. However, DCC is requesting that interested contractors and suppliers submit a request to be placed the OCSL as soon as possible, preferably by March 4, 2026. DCC will require ten (10) business days to process an application for the OCSL. Contractors and suppliers that want to be added to the OCSL, must submit a request through this MERX posting and therein indicate their preferred official language (English or French). IMPORTANT: Contractors and suppliers that were placed on the previous OCSL (April 1, 2023, to March 31, 2026) must re-apply to be placed on the OCSL for April 1, 2026, to March 31, 2029. The language selected by the applicant for this OCSL will be the only language used for the tender documents, the contract documents and communication for all future tenders and during the execution of any resulting contract. The language selected will apply for the duration of the OCSL. Faxed, mailed, or emailed submissions will not be accepted. The OCSL will be used to tender construction services (commercial, residential, industrial, institutional, civil) with an estimated value of $10 million and below. As "Opportunities to bid" arise, DCC will invite all contractors and suppliers on the OCSL to bid on the work. Contractors and suppliers will be invited electronically through MERX and may, at the discretion of DCC, be required to attend a site meeting prior to a tender closing. Tenders will close electronically through MERX. Contractors and suppliers who apply to be placed on the OCSL will require an active MERX account to submit electronic bids. Please contact MERX for information on how to open or reactivate an account. To bid on a tender call, a bidder must be registered on the OCSL used for the tender call. If the bidder's legal name does not appear on the OCSL, DCC may consider their bid to be non-compliant. If you change your business name, it is therefore very important that you notify DCC and consider making the change to your MERX account. DCC reserves the right, at its sole discretion, to: Continue using existing source lists that may already be in place for similar or related services such as existing Quick Response Tender (QRT) source lists, Establish other source lists for specific categories of construction services which may require different pre-qualification requirements, such as Quick Response Tender (QRT) source lists. Such other source lists will not be advertised through this OCSL. Such other source lists will be advertised openly on MERX on a case-by-case basis, Verify which contractors have submitted bids under the OCSL, verify if those that did not submit bids are still interested to be on the OCSL and remove from the OCSL those contractors that are no longer interested, Require additional pre-qualification requirements for any specific tenders done through the OCSL, Elect to post any tender openly on MERX in lieu of this OCSL if DCC deems that an open tender would provide the potential for more competition, Tenders may be set aside for Indigenous businesses in accordance with the Procurement Strategy for Indigenous Business (PSIB). In such cases, all contractors and suppliers on the Open Construction Source List (OCSL) will receive an invitation to bid; however, the MERX advertisement will clearly state that the opportunity is reserved for Indigenous businesses under PSIB. To qualify, the Indigenous business must be registered in Indigenous Services Canada’s (ISC) Indigenous Business Directory (IBD). If you are forming a Joint Venture (JV) to bid on a contract set aside for Indigenous businesses, at least one member of the JV must be listed on the OCSL, and the Indigenous business within the JV must also be registered in ISC’s Indigenous Business Directory. Failure to meet these requirements will result in the bid being deemed non-compliant, Include a requirement for sub-contracting to Indigenous businesses that must be registered under Indigenous Services Canada’s (ISC) Indigenous Business Directory. In this case, the MERX Ad specific to the invitation will clearly identify the inclusion of an Indigenous Benefits Plan (IBP). Contractors are advised that contracts awarded by DCC include measurable performance standards and requirements as detailed in form DCL81-Performance Evaluation Guidelines which is available at https://www.dcc-cdc.gc.ca/industry/forms. A contractor that receives an unacceptable or failing score may be removed from this OCSL and receive no further invitations under the OCSL. Contractors and suppliers are advised that all contracts tendered and awarded by DCC are subject to DCC’s Procurement Code of Conduct which is available for download at https://www.dcc-cdc.gc.ca/industry/forms. A contractor or a supplier that has been declared ineligible or has been suspended by Public Services and Procurement Canada under its Ineligibility and Suspension Policy and the period of ineligibility or suspension has not expired may be removed from this OCSL and received no further invitations. Contractors and suppliers are advised that DCC’s Standard Construction Contract Documents - Electronic Bidding (DCL250) will be used for opportunities under the OCSL and can be downloaded from the DCC website at: https://www.dcc-cdc.gc.ca/industry/forms. Contractors and suppliers are advised that tenders and contracts under this OCSL may contain organization and personnel security requirements. Typically, the organization security requirement will be Designated Organization Screening (DOS) and reliability status for personnel. However more stringent requirement may apply such as Facility Security Clearance (FSC) at the level of SECRET with approved Document Safeguarding (DSC) with secret clearance for personnel. DCC may publish Advance Procurement Notices (APN) identifying potential tenders with anticipated security requirements to provide interested contractors an opportunity to begin the sponsorship request process for potentially obtaining the required security clearance(s) that are anticipated. The process to apply for a security clearance is provided in the APNs. DCC reserves the right to reject any application that does not demonstrate, to the sole satisfaction of DCC, that the contractor or supplier has met the stated requirements. DCC also reserves the right to request clarifications and/or confirmations from any or all firms regarding any aspect of their submission information. A written response to each such communication is required from the firm. By submitting a response to this invitation, contractors and suppliers are providing their consent, pursuant to section 30 of the Defence Production Act, for DCC to publicly disclose, after closing, their legal name, address and whether they have been included on the OCSL. The OCSL may be used for procurements covered by trade agreements to which Canada is a party. You have questions regarding the foregoing, or you wish to be removed from an OCSL, please contact: Defence Construction Canada André Champagne Andre.Champagne@dcc-cdc.gc.caBidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.
Open Construction Source List for CDSB Gagetown and P.E.I.
Defence Construction Canada (DCC) is inviting contractors and suppliers to apply to be placed on an Open Construction Source List (OCSL) for commercial, residential, industrial, institutional, and civil work required by the Department of National Defence, at CDSB Gagetown (and its satellite sites in New Brunswick) and at sites in Prince Edward Island for three fiscal years (April 1, 2026, to March 31, 2029). Interested contractors and suppliers may request to be placed on the OCSL at any time. However, DCC is requesting that interested contractors and suppliers submit a request to be placed the OCSL as soon as possible, preferably by March 4, 2026. DCC will require ten (10) business days to process an application for the OCSL. Contractors and suppliers that want to be added to the OCSL, must submit a request through this MERX posting and therein indicate their preferred official language (English or French). IMPORTANT: Contractors and suppliers that were placed on the previous OCSL (April 1, 2023, to March 31, 2026) must re-apply to be placed on the OCSL for April 1, 2026, to March 31, 2029. The language selected by the applicant for this OCSL will be the only language used for the tender documents, the contract documents and communication for all future tenders and during the execution of any resulting contract. The language selected will apply for the duration of the OCSL. Faxed, mailed, or emailed submissions will not be accepted. The OCSL will be used to tender construction services (commercial, residential, industrial, institutional, civil) with an estimated value of $10 million and below. As "Opportunities to bid" arise, DCC will invite all contractors and suppliers on the OCSL to bid on the work. Contractors and suppliers will be invited electronically through MERX and may, at the discretion of DCC, be required to attend a site meeting prior to a tender closing. Tenders will close electronically through MERX. Contractors and suppliers who apply to be placed on the OCSL will require an active MERX account to submit electronic bids. Please contact MERX for information on how to open or reactivate an account. To bid on a tender call, a bidder must be registered on the OCSL used for the tender call. If the bidder's legal name does not appear on the OCSL, DCC may consider their bid to be non-compliant. If you change your business name, it is therefore very important that you notify DCC and consider making the change to your MERX account. DCC reserves the right, at its sole discretion, to: Continue using existing source lists that may already be in place for similar or related services such as existing Quick Response Tender (QRT) source lists, Establish other source lists for specific categories of construction services which may require different pre-qualification requirements, such as Quick Response Tender (QRT) source lists. Such other source lists will not be advertised through this OCSL. Such other source lists will be advertised openly on MERX on a case-by-case basis, Verify which contractors have submitted bids under the OCSL, verify if those that did not submit bids are still interested to be on the OCSL and remove from the OCSL those contractors that are no longer interested, Require additional pre-qualification requirements for any specific tenders done through the OCSL, Elect to post any tender openly on MERX in lieu of this OCSL if DCC deems that an open tender would provide the potential for more competition, Tenders may be set aside for Indigenous businesses in accordance with the Procurement Strategy for Indigenous Business (PSIB). In such cases, all contractors and suppliers on the Open Construction Source List (OCSL) will receive an invitation to bid; however, the MERX advertisement will clearly state that the opportunity is reserved for Indigenous businesses under PSIB. To qualify, the Indigenous business must be registered in Indigenous Services Canada’s (ISC) Indigenous Business Directory (IBD). If you are forming a Joint Venture (JV) to bid on a contract set aside for Indigenous businesses, at least one member of the JV must be listed on the OCSL, and the Indigenous business within the JV must also be registered in ISC’s Indigenous Business Directory. Failure to meet these requirements will result in the bid being deemed non-compliant, Include a requirement for sub-contracting to Indigenous businesses that must be registered under Indigenous Services Canada’s (ISC) Indigenous Business Directory. In this case, the MERX Ad specific to the invitation will clearly identify the inclusion of an Indigenous Benefits Plan (IBP). Contractors are advised that contracts awarded by DCC include measurable performance standards and requirements as detailed in form DCL81-Performance Evaluation Guidelines which is available at https://www.dcc-cdc.gc.ca/industry/forms. A contractor that receives an unacceptable or failing score may be removed from this OCSL and receive no further invitations under the OCSL. Contractors and suppliers are advised that all contracts tendered and awarded by DCC are subject to DCC’s Procurement Code of Conduct which is available for download at https://www.dcc-cdc.gc.ca/industry/forms. A contractor or a supplier that has been declared ineligible or has been suspended by Public Services and Procurement Canada under its Ineligibility and Suspension Policy and the period of ineligibility or suspension has not expired may be removed from this OCSL and received no further invitations. Contractors and suppliers are advised that DCC’s Standard Construction Contract Documents - Electronic Bidding (DCL250) will be used for opportunities under the OCSL and can be downloaded from the DCC website at: https://www.dcc-cdc.gc.ca/industry/forms. Contractors and suppliers are advised that tenders and contracts under this OCSL may contain organization and personnel security requirements. Typically, the organization security requirement will be Designated Organization Screening (DOS) and reliability status for personnel. However more stringent requirement may apply such as Facility Security Clearance (FSC) at the level of SECRET with approved Document Safeguarding (DSC) with secret clearance for personnel. DCC may publish Advance Procurement Notices (APN) identifying potential tenders with anticipated security requirements to provide interested contractors an opportunity to begin the sponsorship request process for potentially obtaining the required security clearance(s) that are anticipated. The process to apply for a security clearance is provided in the APNs. DCC reserves the right to reject any application that does not demonstrate, to the sole satisfaction of DCC, that the contractor or supplier has met the stated requirements. DCC also reserves the right to request clarifications and/or confirmations from any or all firms regarding any aspect of their submission information. A written response to each such communication is required from the firm. By submitting a response to this invitation, contractors and suppliers are providing their consent, pursuant to section 30 of the Defence Production Act, for DCC to publicly disclose, after closing, their legal name, address and whether they have been included on the OCSL. The OCSL may be used for procurements covered by trade agreements to which Canada is a party. You have questions regarding the foregoing, or you wish to be removed from an OCSL, please contact: Defence Construction Canada André Champagne Andre.Champagne@dcc-cdc.gc.ca Bidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.
Open Construction Source List for 9 Wing Gander
Defence Construction Canada (DCC) is inviting contractors and suppliers to apply to be placed on an Open Construction Source List (OCSL) for commercial, residential, industrial, institutional, and civil work required by the Department of National Defence, at 9 Wing Gander (including but not limited to CFS St. John’s, Stephenville, Corner Brook and Grand Falls-Windsor, Newfoundland and Labrador) for three fiscal years (April 1, 2026, to March 31, 2029). Interested contractors and suppliers may request to be placed on the OCSL at any time. However, DCC is requesting that interested contractors and suppliers submit a request to be placed the OCSL as soon as possible, preferably by March 4, 2026. DCC will require ten (10) business days to process an application for the OCSL. Contractors and suppliers that want to be added to the OCSL, must submit a request through this MERX posting and therein indicate their preferred official language (English or French). IMPORTANT: Contractors and suppliers that were placed on the previous OCSL (April 1, 2023, to March 31, 2026) must re-apply to be placed on the OCSL for April 1, 2026, to March 31, 2029. The language selected by the applicant for this OCSL will be the only language used for the tender documents, the contract documents and communication for all future tenders and during the execution of any resulting contract. The language selected will apply for the duration of the OCSL. Faxed, mailed, or emailed submissions will not be accepted. The OCSL will be used to tender construction services (commercial, residential, industrial, institutional, civil) with an estimated value of $10 million and below. As "Opportunities to bid" arise, DCC will invite all contractors and suppliers on the OCSL to bid on the work. Contractors and suppliers will be invited electronically through MERX and may, at the discretion of DCC, be required to attend a site meeting prior to a tender closing. Tenders will close electronically through MERX. Contractors and suppliers who apply to be placed on the OCSL will require an active MERX account to submit electronic bids. Please contact MERX for information on how to open or reactivate an account. To bid on a tender call, a bidder must be registered on the OCSL used for the tender call. If the bidder's legal name does not appear on the OCSL, DCC may consider their bid to be non-compliant. If you change your business name, it is therefore very important that you notify DCC and consider making the change to your MERX account. DCC reserves the right, at its sole discretion, to: Continue using existing source lists that may already be in place for similar or related services such as existing Quick Response Tender (QRT) source lists, Establish other source lists for specific categories of construction services which may require different pre-qualification requirements, such as Quick Response Tender (QRT) source lists. Such other source lists will not be advertised through this OCSL. Such other source lists will be advertised openly on MERX on a case-by-case basis, Verify which contractors have submitted bids under the OCSL, verify if those that did not submit bids are still interested to be on the OCSL and remove from the OCSL those contractors that are no longer interested, Require additional pre-qualification requirements for any specific tenders done through the OCSL, Elect to post any tender openly on MERX in lieu of this OCSL if DCC deems that an open tender would provide the potential for more competition, Tenders may be set aside for Indigenous businesses in accordance with the Procurement Strategy for Indigenous Business (PSIB). In such cases, all contractors and suppliers on the Open Construction Source List (OCSL) will receive an invitation to bid; however, the MERX advertisement will clearly state that the opportunity is reserved for Indigenous businesses under PSIB. To qualify, the Indigenous business must be registered in Indigenous Services Canada’s (ISC) Indigenous Business Directory (IBD). If you are forming a Joint Venture (JV) to bid on a contract set aside for Indigenous businesses, at least one member of the JV must be listed on the OCSL, and the Indigenous business within the JV must also be registered in ISC’s Indigenous Business Directory. Failure to meet these requirements will result in the bid being deemed non-compliant, Include a requirement for sub-contracting to Indigenous businesses that must be registered under Indigenous Services Canada’s (ISC) Indigenous Business Directory. In this case, the MERX Ad specific to the invitation will clearly identify the inclusion of an Indigenous Benefits Plan (IBP). Contractors are advised that contracts awarded by DCC include measurable performance standards and requirements as detailed in form DCL81-Performance Evaluation Guidelines which is available at https://www.dcc-cdc.gc.ca/industry/forms. A contractor that receives an unacceptable or failing score may be removed from this OCSL and receive no further invitations under the OCSL. Contractors and suppliers are advised that all contracts tendered and awarded by DCC are subject to DCC’s Procurement Code of Conduct which is available for download at https://www.dcc-cdc.gc.ca/industry/forms. A contractor or a supplier that has been declared ineligible or has been suspended by Public Services and Procurement Canada under its Ineligibility and Suspension Policy and the period of ineligibility or suspension has not expired may be removed from this OCSL and received no further invitations. Contractors and suppliers are advised that DCC’s Standard Construction Contract Documents - Electronic Bidding (DCL250) will be used for opportunities under the OCSL and can be downloaded from the DCC website at: https://www.dcc-cdc.gc.ca/industry/forms. Contractors and suppliers are advised that tenders and contracts under this OCSL may contain organization and personnel security requirements. Typically, the organization security requirement will be Designated Organization Screening (DOS) and reliability status for personnel. However more stringent requirement may apply such as Facility Security Clearance (FSC) at the level of SECRET with approved Document Safeguarding (DSC) with secret clearance for personnel. DCC may publish Advance Procurement Notices (APN) identifying potential tenders with anticipated security requirements to provide interested contractors an opportunity to begin the sponsorship request process for potentially obtaining the required security clearance(s) that are anticipated. The process to apply for a security clearance is provided in the APNs. DCC reserves the right to reject any application that does not demonstrate, to the sole satisfaction of DCC, that the contractor or supplier has met the stated requirements. DCC also reserves the right to request clarifications and/or confirmations from any or all firms regarding any aspect of their submission information. A written response to each such communication is required from the firm. By submitting a response to this invitation, contractors and suppliers are providing their consent, pursuant to section 30 of the Defence Production Act, for DCC to publicly disclose, after closing, their legal name, address and whether they have been included on the OCSL. The OCSL may be used for procurements covered by trade agreements to which Canada is a party. You have questions regarding the foregoing, or you wish to be removed from an OCSL, please contact: Defence Construction Canada André Champagne Andre.Champagne@dcc-cdc.gc.caBidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.
Open Construction Source List for 22 Wing North Bay
Defence Construction Canada (DCC) is inviting contractors and suppliers to apply to be placed on an Open Construction Source List (OCSL) for commercial, residential, industrial, institutional, and civil work required by the Department of National Defence, at 22 Wing North Bay (and its satellite sites in Northern Ontario, including but not limited to, Sudbury, Timmins, and Sault Ste. Marie) for three fiscal years (April 1, 2026, to March 31, 2029). Interested contractors and suppliers may request to be placed on the OCSL at any time. However, DCC is requesting that interested contractors and suppliers submit a request to be placed the OCSL as soon as possible, preferably by March 4, 2026. DCC will require ten (10) business days to process an application for the OCSL. Contractors and suppliers that want to be added to the OCSL, must submit a request through this MERX posting and therein indicate their preferred official language (English or French). IMPORTANT: Contractors and suppliers that were placed on the previous OCSL (April 1, 2023, to March 31, 2026) must re-apply to be placed on the OCSL for April 1, 2026, to March 31, 2029. The language selected by the applicant for this OCSL will be the only language used for the tender documents, the contract documents and communication for all future tenders and during the execution of any resulting contract. The language selected will apply for the duration of the OCSL. Faxed, mailed, or emailed submissions will not be accepted. The OCSL will be used to tender construction services (commercial, residential, industrial, institutional, civil) with an estimated value of $10 million and below. As "Opportunities to bid" arise, DCC will invite all contractors and suppliers on the OCSL to bid on the work. Contractors and suppliers will be invited electronically through MERX and may, at the discretion of DCC, be required to attend a site meeting prior to a tender closing. Tenders will close electronically through MERX. Contractors and suppliers who apply to be placed on the OCSL will require an active MERX account to submit electronic bids. Please contact MERX for information on how to open or reactivate an account. To bid on a tender call, a bidder must be registered on the OCSL used for the tender call. If the bidder's legal name does not appear on the OCSL, DCC may consider their bid to be non-compliant. If you change your business name, it is therefore very important that you notify DCC and consider making the change to your MERX account. DCC reserves the right, at its sole discretion, to: Continue using existing source lists that may already be in place for similar or related services such as existing Quick Response Tender (QRT) source lists, Establish other source lists for specific categories of construction services which may require different pre-qualification requirements, such as Quick Response Tender (QRT) source lists. Such other source lists will not be advertised through this OCSL. Such other source lists will be advertised openly on MERX on a case-by-case basis, Verify which contractors have submitted bids under the OCSL, verify if those that did not submit bids are still interested to be on the OCSL and remove from the OCSL those contractors that are no longer interested, Require additional pre-qualification requirements for any specific tenders done through the OCSL, Elect to post any tender openly on MERX in lieu of this OCSL if DCC deems that an open tender would provide the potential for more competition, Tenders may be set aside for Indigenous businesses in accordance with the Procurement Strategy for Indigenous Business (PSIB). In such cases, all contractors and suppliers on the Open Construction Source List (OCSL) will receive an invitation to bid; however, the MERX advertisement will clearly state that the opportunity is reserved for Indigenous businesses under PSIB. To qualify, the Indigenous business must be registered in Indigenous Services Canada’s (ISC) Indigenous Business Directory (IBD). If you are forming a Joint Venture (JV) to bid on a contract set aside for Indigenous businesses, at least one member of the JV must be listed on the OCSL, and the Indigenous business within the JV must also be registered in ISC’s Indigenous Business Directory. Failure to meet these requirements will result in the bid being deemed non-compliant, Include a requirement for sub-contracting to Indigenous businesses that must be registered under Indigenous Services Canada’s (ISC) Indigenous Business Directory. In this case, the MERX Ad specific to the invitation will clearly identify the inclusion of an Indigenous Benefits Plan (IBP). Contractors are advised that contracts awarded by DCC include measurable performance standards and requirements as detailed in form DCL81-Performance Evaluation Guidelines which is available at https://www.dcc-cdc.gc.ca/industry/forms. A contractor that receives an unacceptable or failing score may be removed from this OCSL and receive no further invitations under the OCSL. Contractors and suppliers are advised that all contracts tendered and awarded by DCC are subject to DCC’s Procurement Code of Conduct which is available for download at https://www.dcc-cdc.gc.ca/industry/forms. A contractor or a supplier that has been declared ineligible or has been suspended by Public Services and Procurement Canada under its Ineligibility and Suspension Policy and the period of ineligibility or suspension has not expired may be removed from this OCSL and received no further invitations. Contractors and suppliers are advised that DCC’s Standard Construction Contract Documents - Electronic Bidding (DCL250) will be used for opportunities under the OCSL and can be downloaded from the DCC website at: https://www.dcc-cdc.gc.ca/industry/forms. Contractors and suppliers are advised that tenders and contracts under this OCSL may contain organization and personnel security requirements. Typically, the organization security requirement will be Designated Organization Screening (DOS) and reliability status for personnel. However more stringent requirement may apply such as Facility Security Clearance (FSC) at the level of SECRET with approved Document Safeguarding (DSC) with secret clearance for personnel. DCC may publish Advance Procurement Notices (APN) identifying potential tenders with anticipated security requirements to provide interested contractors an opportunity to begin the sponsorship request process for potentially obtaining the required security clearance(s) that are anticipated. The process to apply for a security clearance is provided in the APNs. APNs associated with upcoming contract opportunities at 22 Wing/CFB North Bay for Real Property Operations Group (RP OPS) and Canadian Forces Housing Agency (CFHA) base program can be found here: Apn_base Program 22 Wing/canadian Forces Base, North Bay - APN_OR26SLNB | MERX DCC reserves the right to reject any application that does not demonstrate, to the sole satisfaction of DCC, that the contractor or supplier has met the stated requirements. DCC also reserves the right to request clarifications and/or confirmations from any or all firms regarding any aspect of their submission information. A written response to each such communication is required from the firm. By submitting a response to this invitation, contractors and suppliers are providing their consent, pursuant to section 30 of the Defence Production Act, for DCC to publicly disclose, after closing, their legal name, address and whether they have been included on the OCSL. The OCSL may be used for procurements covered by trade agreements to which Canada is a party. You have questions regarding the foregoing, or you wish to be removed from an OCSL, please contact: Defence Construction Canada André Champagne Andre.Champagne@dcc-cdc.gc.caBidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.
Open Construction Source List for CFB Petawawa
Defence Construction Canada (DCC) is inviting contractors and suppliers to apply to be placed on an Open Construction Source List (OCSL) for commercial, residential, industrial, institutional, and civil work required by the Department of National Defence, at CFB Petawawa (and its satellite site in Pembroke) for three fiscal years (April 1, 2026, to March 31, 2029). Interested contractors and suppliers may request to be placed on the OCSL at any time. However, DCC is requesting that interested contractors and suppliers submit a request to be placed the OCSL as soon as possible, preferably by March 4, 2026. DCC will require ten (10) business days to process an application for the OCSL. Contractors and suppliers that want to be added to the OCSL, must submit a request through this MERX posting and therein indicate their preferred official language (English or French). IMPORTANT: Contractors and suppliers that were placed on the previous OCSL (April 1, 2023, to March 31, 2026) must re-apply to be placed on the OCSL for April 1, 2026, to March 31, 2029. The language selected by the applicant for this OCSL will be the only language used for the tender documents, the contract documents and communication for all future tenders and during the execution of any resulting contract. The language selected will apply for the duration of the OCSL. Faxed, mailed, or emailed submissions will not be accepted. The OCSL will be used to tender construction services (commercial, residential, industrial, institutional, civil) with an estimated value of $10 million and below. As "Opportunities to bid" arise, DCC will invite all contractors and suppliers on the OCSL to bid on the work. Contractors and suppliers will be invited electronically through MERX and may, at the discretion of DCC, be required to attend a site meeting prior to a tender closing. Tenders will close electronically through MERX. Contractors and suppliers who apply to be placed on the OCSL will require an active MERX account to submit electronic bids. Please contact MERX for information on how to open or reactivate an account. To bid on a tender call, a bidder must be registered on the OCSL used for the tender call. If the bidder's legal name does not appear on the OCSL, DCC may consider their bid to be non-compliant. If you change your business name, it is therefore very important that you notify DCC and consider making the change to your MERX account. DCC reserves the right, at its sole discretion, to: Continue using existing source lists that may already be in place for similar or related services such as existing Quick Response Tender (QRT) source lists, Establish other source lists for specific categories of construction services which may require different pre-qualification requirements, such as Quick Response Tender (QRT) source lists. Such other source lists will not be advertised through this OCSL. Such other source lists will be advertised openly on MERX on a case-by-case basis, Verify which contractors have submitted bids under the OCSL, verify if those that did not submit bids are still interested to be on the OCSL and remove from the OCSL those contractors that are no longer interested, Require additional pre-qualification requirements for any specific tenders done through the OCSL, Elect to post any tender openly on MERX in lieu of this OCSL if DCC deems that an open tender would provide the potential for more competition, Tenders may be set aside for Indigenous businesses in accordance with the Procurement Strategy for Indigenous Business (PSIB). In such cases, all contractors and suppliers on the Open Construction Source List (OCSL) will receive an invitation to bid; however, the MERX advertisement will clearly state that the opportunity is reserved for Indigenous businesses under PSIB. To qualify, the Indigenous business must be registered in Indigenous Services Canada’s (ISC) Indigenous Business Directory (IBD). If you are forming a Joint Venture (JV) to bid on a contract set aside for Indigenous businesses, at least one member of the JV must be listed on the OCSL, and the Indigenous business within the JV must also be registered in ISC’s Indigenous Business Directory. Failure to meet these requirements will result in the bid being deemed non-compliant, Include a requirement for sub-contracting to Indigenous businesses that must be registered under Indigenous Services Canada’s (ISC) Indigenous Business Directory. In this case, the MERX Ad specific to the invitation will clearly identify the inclusion of an Indigenous Benefits Plan (IBP). Contractors are advised that contracts awarded by DCC include measurable performance standards and requirements as detailed in form DCL81-Performance Evaluation Guidelines which is available at https://www.dcc-cdc.gc.ca/industry/forms. A contractor that receives an unacceptable or failing score may be removed from this OCSL and receive no further invitations under the OCSL. Contractors and suppliers are advised that all contracts tendered and awarded by DCC are subject to DCC’s Procurement Code of Conduct which is available for download at https://www.dcc-cdc.gc.ca/industry/forms. A contractor or a supplier that has been declared ineligible or has been suspended by Public Services and Procurement Canada under its Ineligibility and Suspension Policy and the period of ineligibility or suspension has not expired may be removed from this OCSL and received no further invitations. Contractors and suppliers are advised that DCC’s Standard Construction Contract Documents - Electronic Bidding (DCL250) will be used for opportunities under the OCSL and can be downloaded from the DCC website at: https://www.dcc-cdc.gc.ca/industry/forms. Contractors and suppliers are advised that tenders and contracts under this OCSL may contain organization and personnel security requirements. Typically, the organization security requirement will be Designated Organization Screening (DOS) and reliability status for personnel. However more stringent requirement may apply such as Facility Security Clearance (FSC) at the level of SECRET with approved Document Safeguarding (DSC) with secret clearance for personnel. DCC may publish Advance Procurement Notices (APN) identifying potential tenders with anticipated security requirements to provide interested contractors an opportunity to begin the sponsorship request process for potentially obtaining the required security clearance(s) that are anticipated. The process to apply for a security clearance is provided in the APNs. APNs associated with upcoming contract opportunities at CFB Petawawa for Real Property Operations Group (RP OPS) and Canadian Forces Housing Agency (CFHA) base program can be found here: Apn_base Program Petawawa, Ontario - APN_OR26SLPA | MERX DCC reserves the right to reject any application that does not demonstrate, to the sole satisfaction of DCC, that the contractor or supplier has met the stated requirements. DCC also reserves the right to request clarifications and/or confirmations from any or all firms regarding any aspect of their submission information. A written response to each such communication is required from the firm. By submitting a response to this invitation, contractors and suppliers are providing their consent, pursuant to section 30 of the Defence Production Act, for DCC to publicly disclose, after closing, their legal name, address and whether they have been included on the OCSL. The OCSL may be used for procurements covered by trade agreements to which Canada is a party. You have questions regarding the foregoing, or you wish to be removed from an OCSL, please contact: Defence Construction Canada André Champagne Andre.Champagne@dcc-cdc.gc.caBidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.
Open Construction Source List for CFB Borden
Defence Construction Canada (DCC) is inviting contractors and suppliers to apply to be placed on an Open Construction Source List (OCSL) for commercial, residential, industrial, institutional, and civil work required by the Department of National Defence, at CFB Borden (and its satellite sites in Meaford, Owen Sound, and Barrie) for three fiscal years (April 1, 2026, to March 31, 2029). Interested contractors and suppliers may request to be placed on the OCSL at any time. However, DCC is requesting that interested contractors and suppliers submit a request to be placed the OCSL as soon as possible, preferably by March 4, 2026. DCC will require ten (10) business days to process an application for the OCSL. Contractors and suppliers that want to be added to the OCSL, must submit a request through this MERX posting and therein indicate their preferred official language (English or French). IMPORTANT: Contractors and suppliers that were placed on the previous OCSL (April 1, 2023, to March 31, 2026) must re-apply to be placed on the OCSL for April 1, 2026, to March 31, 2029. The language selected by the applicant for this OCSL will be the only language used for the tender documents, the contract documents and communication for all future tenders and during the execution of any resulting contract. The language selected will apply for the duration of the OCSL. Faxed, mailed, or emailed submissions will not be accepted. The OCSL will be used to tender construction services (commercial, residential, industrial, institutional, civil) with an estimated value of $10 million and below. As "Opportunities to bid" arise, DCC will invite all contractors and suppliers on the OCSL to bid on the work. Contractors and suppliers will be invited electronically through MERX and may, at the discretion of DCC, be required to attend a site meeting prior to a tender closing. Tenders will close electronically through MERX. Contractors and suppliers who apply to be placed on the OCSL will require an active MERX account to submit electronic bids. Please contact MERX for information on how to open or reactivate an account. To bid on a tender call, a bidder must be registered on the OCSL used for the tender call. If the bidder's legal name does not appear on the OCSL, DCC may consider their bid to be non-compliant. If you change your business name, it is therefore very important that you notify DCC and consider making the change to your MERX account. DCC reserves the right, at its sole discretion, to: Continue using existing source lists that may already be in place for similar or related services such as existing Quick Response Tender (QRT) source lists, Establish other source lists for specific categories of construction services which may require different pre-qualification requirements, such as Quick Response Tender (QRT) source lists. Such other source lists will not be advertised through this OCSL. Such other source lists will be advertised openly on MERX on a case-by-case basis, Verify which contractors have submitted bids under the OCSL, verify if those that did not submit bids are still interested to be on the OCSL and remove from the OCSL those contractors that are no longer interested, Require additional pre-qualification requirements for any specific tenders done through the OCSL, Elect to post any tender openly on MERX in lieu of this OCSL if DCC deems that an open tender would provide the potential for more competition, Tenders may be set aside for Indigenous businesses in accordance with the Procurement Strategy for Indigenous Business (PSIB). In such cases, all contractors and suppliers on the Open Construction Source List (OCSL) will receive an invitation to bid; however, the MERX advertisement will clearly state that the opportunity is reserved for Indigenous businesses under PSIB. To qualify, the Indigenous business must be registered in Indigenous Services Canada’s (ISC) Indigenous Business Directory (IBD). If you are forming a Joint Venture (JV) to bid on a contract set aside for Indigenous businesses, at least one member of the JV must be listed on the OCSL, and the Indigenous business within the JV must also be registered in ISC’s Indigenous Business Directory. Failure to meet these requirements will result in the bid being deemed non-compliant, Include a requirement for sub-contracting to Indigenous businesses that must be registered under Indigenous Services Canada’s (ISC) Indigenous Business Directory. In this case, the MERX Ad specific to the invitation will clearly identify the inclusion of an Indigenous Benefits Plan (IBP). Contractors are advised that contracts awarded by DCC include measurable performance standards and requirements as detailed in form DCL81-Performance Evaluation Guidelines which is available at https://www.dcc-cdc.gc.ca/industry/forms. A contractor that receives an unacceptable or failing score may be removed from this OCSL and receive no further invitations under the OCSL. Contractors and suppliers are advised that all contracts tendered and awarded by DCC are subject to DCC’s Procurement Code of Conduct which is available for download at https://www.dcc-cdc.gc.ca/industry/forms. A contractor or a supplier that has been declared ineligible or has been suspended by Public Services and Procurement Canada under its Ineligibility and Suspension Policy and the period of ineligibility or suspension has not expired may be removed from this OCSL and received no further invitations. Contractors and suppliers are advised that DCC’s Standard Construction Contract Documents - Electronic Bidding (DCL250) will be used for opportunities under the OCSL and can be downloaded from the DCC website at: https://www.dcc-cdc.gc.ca/industry/forms. Contractors and suppliers are advised that tenders and contracts under this OCSL may contain organization and personnel security requirements. Typically, the organization security requirement will be Designated Organization Screening (DOS) and reliability status for personnel. However more stringent requirement may apply such as Facility Security Clearance (FSC) at the level of SECRET with approved Document Safeguarding (DSC) with secret clearance for personnel. DCC may publish Advance Procurement Notices (APN) identifying potential tenders with anticipated security requirements to provide interested contractors an opportunity to begin the sponsorship request process for potentially obtaining the required security clearance(s) that are anticipated. The process to apply for a security clearance is provided in the APNs. APNs associated with upcoming contract opportunities at CFB Borden for Real Property Operations Group (RP OPS) and Canadian Forces Housing Agency (CFHA) base program can be found here: Apn_base Program, Cfb Borden - APN_OR26SLBN | MERX DCC reserves the right to reject any application that does not demonstrate, to the sole satisfaction of DCC, that the contractor or supplier has met the stated requirements. DCC also reserves the right to request clarifications and/or confirmations from any or all firms regarding any aspect of their submission information. A written response to each such communication is required from the firm. By submitting a response to this invitation, contractors and suppliers are providing their consent, pursuant to section 30 of the Defence Production Act, for DCC to publicly disclose, after closing, their legal name, address and whether they have been included on the OCSL. The OCSL may be used for procurements covered by trade agreements to which Canada is a party. You have questions regarding the foregoing, or you wish to be removed from an OCSL, please contact: Defence Construction Canada André Champagne Andre.Champagne@dcc-cdc.gc.caBidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.
Open Construction Source List for CFB Kingston
Defence Construction Canada (DCC) is inviting contractors and suppliers to apply to be placed on an Open Construction Source List (OCSL) for commercial, residential, industrial, institutional, and civil work required by the Department of National Defence, at CFB Kingston (and its satellite sites in Brockville and Cornwall) for three fiscal years (April 1, 2026, to March 31, 2029). Interested contractors and suppliers may request to be placed on the OCSL at any time. However, DCC is requesting that interested contractors and suppliers submit a request to be placed the OCSL as soon as possible, preferably by March 4, 2026. DCC will require ten (10) business days to process an application for the OCSL. Contractors and suppliers that want to be added to the OCSL, must submit a request through this MERX posting and therein indicate their preferred official language (English or French). IMPORTANT: Contractors and suppliers that were placed on the previous OCSL (April 1, 2023, to March 31, 2026) must re-apply to be placed on the OCSL for April 1, 2026, to March 31, 2029. The language selected by the applicant for this OCSL will be the only language used for the tender documents, the contract documents and communication for all future tenders and during the execution of any resulting contract. The language selected will apply for the duration of the OCSL. Faxed, mailed, or emailed submissions will not be accepted. The OCSL will be used to tender construction services (commercial, residential, industrial, institutional, civil) with an estimated value of $10 million and below. As "Opportunities to bid" arise, DCC will invite all contractors and suppliers on the OCSL to bid on the work. Contractors and suppliers will be invited electronically through MERX and may, at the discretion of DCC, be required to attend a site meeting prior to a tender closing. Tenders will close electronically through MERX. Contractors and suppliers who apply to be placed on the OCSL will require an active MERX account to submit electronic bids. Please contact MERX for information on how to open or reactivate an account. To bid on a tender call, a bidder must be registered on the OCSL used for the tender call. If the bidder's legal name does not appear on the OCSL, DCC may consider their bid to be non-compliant. If you change your business name, it is therefore very important that you notify DCC and consider making the change to your MERX account. DCC reserves the right, at its sole discretion, to: Continue using existing source lists that may already be in place for similar or related services such as existing Quick Response Tender (QRT) source lists, Establish other source lists for specific categories of construction services which may require different pre-qualification requirements, such as Quick Response Tender (QRT) source lists. Such other source lists will not be advertised through this OCSL. Such other source lists will be advertised openly on MERX on a case-by-case basis, Verify which contractors have submitted bids under the OCSL, verify if those that did not submit bids are still interested to be on the OCSL and remove from the OCSL those contractors that are no longer interested, Require additional pre-qualification requirements for any specific tenders done through the OCSL, Elect to post any tender openly on MERX in lieu of this OCSL if DCC deems that an open tender would provide the potential for more competition, Tenders may be set aside for Indigenous businesses in accordance with the Procurement Strategy for Indigenous Business (PSIB). In such cases, all contractors and suppliers on the Open Construction Source List (OCSL) will receive an invitation to bid; however, the MERX advertisement will clearly state that the opportunity is reserved for Indigenous businesses under PSIB. To qualify, the Indigenous business must be registered in Indigenous Services Canada’s (ISC) Indigenous Business Directory (IBD). If you are forming a Joint Venture (JV) to bid on a contract set aside for Indigenous businesses, at least one member of the JV must be listed on the OCSL, and the Indigenous business within the JV must also be registered in ISC’s Indigenous Business Directory. Failure to meet these requirements will result in the bid being deemed non-compliant, Include a requirement for sub-contracting to Indigenous businesses that must be registered under Indigenous Services Canada’s (ISC) Indigenous Business Directory. In this case, the MERX Ad specific to the invitation will clearly identify the inclusion of an Indigenous Benefits Plan (IBP). Contractors are advised that contracts awarded by DCC include measurable performance standards and requirements as detailed in form DCL81-Performance Evaluation Guidelines which is available at https://www.dcc-cdc.gc.ca/industry/forms. A contractor that receives an unacceptable or failing score may be removed from this OCSL and receive no further invitations under the OCSL. Contractors and suppliers are advised that all contracts tendered and awarded by DCC are subject to DCC’s Procurement Code of Conduct which is available for download at https://www.dcc-cdc.gc.ca/industry/forms. A contractor or a supplier that has been declared ineligible or has been suspended by Public Services and Procurement Canada under its Ineligibility and Suspension Policy and the period of ineligibility or suspension has not expired may be removed from this OCSL and received no further invitations. Contractors and suppliers are advised that DCC’s Standard Construction Contract Documents - Electronic Bidding (DCL250) will be used for opportunities under the OCSL and can be downloaded from the DCC website at: https://www.dcc-cdc.gc.ca/industry/forms. Contractors and suppliers are advised that tenders and contracts under this OCSL may contain organization and personnel security requirements. Typically, the organization security requirement will be Designated Organization Screening (DOS) and reliability status for personnel. However more stringent requirement may apply such as Facility Security Clearance (FSC) at the level of SECRET with approved Document Safeguarding (DSC) with secret clearance for personnel. DCC may publish Advance Procurement Notices (APN) identifying potential tenders with anticipated security requirements to provide interested contractors an opportunity to begin the sponsorship request process for potentially obtaining the required security clearance(s) that are anticipated. The process to apply for a security clearance is provided in the APNs. APNs associated with upcoming contract opportunities at CFB Kingston for Real Property Operations Group (RP OPS) and Canadian Forces Housing Agency (CFHA) base program can be found here:Apn_base Program, Kingston, On - APN_OR26SLKN | MERX DCC reserves the right to reject any application that does not demonstrate, to the sole satisfaction of DCC, that the contractor or supplier has met the stated requirements. DCC also reserves the right to request clarifications and/or confirmations from any or all firms regarding any aspect of their submission information. A written response to each such communication is required from the firm. By submitting a response to this invitation, contractors and suppliers are providing their consent, pursuant to section 30 of the Defence Production Act, for DCC to publicly disclose, after closing, their legal name, address and whether they have been included on the OCSL. The OCSL may be used for procurements covered by trade agreements to which Canada is a party. You have questions regarding the foregoing, or you wish to be removed from an OCSL, please contact: Defence Construction Canada André Champagne Andre.Champagne@dcc-cdc.gc.caBidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.
Open Construction Source List for Ottawa and Gatineau
Defence Construction Canada (DCC) is inviting contractors and suppliers to apply to be placed on an Open Construction Source List (OCSL) for commercial, residential, industrial, institutional, and civil work required by the Department of National Defence, in the National Capital Region (Ottawa and Gatineau) for three fiscal years (April 1, 2026, to March 31, 2029). Interested contractors and suppliers may request to be placed on the OCSL at any time. However, DCC is requesting that interested contractors and suppliers submit a request to be placed the OCSL as soon as possible, preferably by March 4, 2026. DCC will require ten (10) business days to process an application for the OCSL. Contractors and suppliers that want to be added to the OCSL, must submit a request through this MERX posting and therein indicate their preferred official language (English or French). IMPORTANT: Contractors and suppliers that were placed on the previous OCSL (April 1, 2023, to March 31, 2026) must re-apply to be placed on the OCSL for April 1, 2026, to March 31, 2029. The language selected by the applicant for this OCSL will be the only language used for the tender documents, the contract documents and communication for all future tenders and during the execution of any resulting contract. The language selected will apply for the duration of the OCSL. Faxed, mailed, or emailed submissions will not be accepted. The OCSL will be used to tender construction services (commercial, residential, industrial, institutional, civil) with an estimated value of $10 million and below. As "Opportunities to bid" arise, DCC will invite all contractors and suppliers on the OCSL to bid on the work. Contractors and suppliers will be invited electronically through MERX and may, at the discretion of DCC, be required to attend a site meeting prior to a tender closing. Tenders will close electronically through MERX. Contractors and suppliers who apply to be placed on the OCSL will require an active MERX account to submit electronic bids. Please contact MERX for information on how to open or reactivate an account. To bid on a tender call, a bidder must be registered on the OCSL used for the tender call. If the bidder's legal name does not appear on the OCSL, DCC may consider their bid to be non-compliant. If you change your business name, it is therefore very important that you notify DCC and consider making the change to your MERX account. DCC reserves the right, at its sole discretion, to: Continue using existing source lists that may already be in place for similar or related services such as existing Quick Response Tender (QRT) source lists, Establish other source lists for specific categories of construction services which may require different pre-qualification requirements, such as Quick Response Tender (QRT) source lists. Such other source lists will not be advertised through this OCSL. Such other source lists will be advertised openly on MERX on a case-by-case basis, Verify which contractors have submitted bids under the OCSL, verify if those that did not submit bids are still interested to be on the OCSL and remove from the OCSL those contractors that are no longer interested, Require additional pre-qualification requirements for any specific tenders done through the OCSL, Elect to post any tender openly on MERX in lieu of this OCSL if DCC deems that an open tender would provide the potential for more competition, Tenders may be set aside for Indigenous businesses in accordance with the Procurement Strategy for Indigenous Business (PSIB). In such cases, all contractors and suppliers on the Open Construction Source List (OCSL) will receive an invitation to bid; however, the MERX advertisement will clearly state that the opportunity is reserved for Indigenous businesses under PSIB. To qualify, the Indigenous business must be registered in Indigenous Services Canada’s (ISC) Indigenous Business Directory (IBD). If you are forming a Joint Venture (JV) to bid on a contract set aside for Indigenous businesses, at least one member of the JV must be listed on the OCSL, and the Indigenous business within the JV must also be registered in ISC’s Indigenous Business Directory. Failure to meet these requirements will result in the bid being deemed non-compliant, Include a requirement for sub-contracting to Indigenous businesses that must be registered under Indigenous Services Canada’s (ISC) Indigenous Business Directory. In this case, the MERX Ad specific to the invitation will clearly identify the inclusion of an Indigenous Benefits Plan (IBP). Contractors are advised that contracts awarded by DCC include measurable performance standards and requirements as detailed in form DCL81-Performance Evaluation Guidelines which is available at https://www.dcc-cdc.gc.ca/industry/forms. A contractor that receives an unacceptable or failing score may be removed from this OCSL and receive no further invitations under the OCSL. Contractors and suppliers are advised that all contracts tendered and awarded by DCC are subject to DCC’s Procurement Code of Conduct which is available for download at https://www.dcc-cdc.gc.ca/industry/forms. A contractor or a supplier that has been declared ineligible or has been suspended by Public Services and Procurement Canada under its Ineligibility and Suspension Policy and the period of ineligibility or suspension has not expired may be removed from this OCSL and received no further invitations. Contractors and suppliers are advised that DCC’s Standard Construction Contract Documents - Electronic Bidding (DCL250) will be used for opportunities under the OCSL and can be downloaded from the DCC website at: https://www.dcc-cdc.gc.ca/industry/forms. Contractors and suppliers are advised that tenders and contracts under this OCSL may contain organization and personnel security requirements. Typically, the organization security requirement will be Designated Organization Screening (DOS) and reliability status for personnel. However more stringent requirement may apply such as Facility Security Clearance (FSC) at the level of SECRET with approved Document Safeguarding (DSC) with secret clearance for personnel. DCC may publish Advance Procurement Notices (APN) identifying potential tenders with anticipated security requirements to provide interested contractors an opportunity to begin the sponsorship request process for potentially obtaining the required security clearance(s) that are anticipated. The process to apply for a security clearance is provided in the APNs. DCC reserves the right to reject any application that does not demonstrate, to the sole satisfaction of DCC, that the contractor or supplier has met the stated requirements. DCC also reserves the right to request clarifications and/or confirmations from any or all firms regarding any aspect of their submission information. A written response to each such communication is required from the firm. By submitting a response to this invitation, contractors and suppliers are providing their consent, pursuant to section 30 of the Defence Production Act, for DCC to publicly disclose, after closing, their legal name, address and whether they have been included on the OCSL. The OCSL may be used for procurements covered by trade agreements to which Canada is a party. You have questions regarding the foregoing, or you wish to be removed from an OCSL, please contact: Defence Construction Canada André Champagne Andre.Champagne@dcc-cdc.gc.caBidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.
Open Construction Source List for 8 Wing Trenton
Defence Construction Canada (DCC) is inviting contractors and suppliers to apply to be placed on an Open Construction Source List (OCSL) for commercial, residential, industrial, institutional, and civil work required by the Department of National Defence, at 8 Wing Trenton (and its satellite sites in Belleville, Peterborough, and Prince Edward County) for three fiscal years (April 1, 2026, to March 31, 2029). Interested contractors and suppliers may request to be placed on the OCSL at any time. However, DCC is requesting that interested contractors and suppliers submit a request to be placed the OCSL as soon as possible, preferably by March 4, 2026. DCC will require ten (10) business days to process an application for the OCSL. Contractors and suppliers that want to be added to the OCSL, must submit a request through this MERX posting and therein indicate their preferred official language (English or French). IMPORTANT: Contractors and suppliers that were placed on the previous OCSL (April 1, 2023, to March 31, 2026) must re-apply to be placed on the OCSL for April 1, 2026, to March 31, 2029. The language selected by the applicant for this OCSL will be the only language used for the tender documents, the contract documents and communication for all future tenders and during the execution of any resulting contract. The language selected will apply for the duration of the OCSL. Faxed, mailed, or emailed submissions will not be accepted. The OCSL will be used to tender construction services (commercial, residential, industrial, institutional, civil) with an estimated value of $10 million and below. As "Opportunities to bid" arise, DCC will invite all contractors and suppliers on the OCSL to bid on the work. Contractors and suppliers will be invited electronically through MERX and may, at the discretion of DCC, be required to attend a site meeting prior to a tender closing. Tenders will close electronically through MERX. Contractors and suppliers who apply to be placed on the OCSL will require an active MERX account to submit electronic bids. Please contact MERX for information on how to open or reactivate an account. To bid on a tender call, a bidder must be registered on the OCSL used for the tender call. If the bidder's legal name does not appear on the OCSL, DCC may consider their bid to be non-compliant. If you change your business name, it is therefore very important that you notify DCC and consider making the change to your MERX account. DCC reserves the right, at its sole discretion, to: Continue using existing source lists that may already be in place for similar or related services such as existing Quick Response Tender (QRT) source lists, Establish other source lists for specific categories of construction services which may require different pre-qualification requirements, such as Quick Response Tender (QRT) source lists. Such other source lists will not be advertised through this OCSL. Such other source lists will be advertised openly on MERX on a case-by-case basis, Verify which contractors have submitted bids under the OCSL, verify if those that did not submit bids are still interested to be on the OCSL and remove from the OCSL those contractors that are no longer interested, Require additional pre-qualification requirements for any specific tenders done through the OCSL, Elect to post any tender openly on MERX in lieu of this OCSL if DCC deems that an open tender would provide the potential for more competition, Tenders may be set aside for Indigenous businesses in accordance with the Procurement Strategy for Indigenous Business (PSIB). In such cases, all contractors and suppliers on the Open Construction Source List (OCSL) will receive an invitation to bid; however, the MERX advertisement will clearly state that the opportunity is reserved for Indigenous businesses under PSIB. To qualify, the Indigenous business must be registered in Indigenous Services Canada’s (ISC) Indigenous Business Directory (IBD). If you are forming a Joint Venture (JV) to bid on a contract set aside for Indigenous businesses, at least one member of the JV must be listed on the OCSL, and the Indigenous business within the JV must also be registered in ISC’s Indigenous Business Directory. Failure to meet these requirements will result in the bid being deemed non-compliant, Include a requirement for sub-contracting to Indigenous businesses that must be registered under Indigenous Services Canada’s (ISC) Indigenous Business Directory. In this case, the MERX Ad specific to the invitation will clearly identify the inclusion of an Indigenous Benefits Plan (IBP). Contractors are advised that contracts awarded by DCC include measurable performance standards and requirements as detailed in form DCL81-Performance Evaluation Guidelines which is available at https://www.dcc-cdc.gc.ca/industry/forms. A contractor that receives an unacceptable or failing score may be removed from this OCSL and receive no further invitations under the OCSL. Contractors and suppliers are advised that all contracts tendered and awarded by DCC are subject to DCC’s Procurement Code of Conduct which is available for download at https://www.dcc-cdc.gc.ca/industry/forms. A contractor or a supplier that has been declared ineligible or has been suspended by Public Services and Procurement Canada under its Ineligibility and Suspension Policy and the period of ineligibility or suspension has not expired may be removed from this OCSL and received no further invitations. Contractors and suppliers are advised that DCC’s Standard Construction Contract Documents - Electronic Bidding (DCL250) will be used for opportunities under the OCSL and can be downloaded from the DCC website at: https://www.dcc-cdc.gc.ca/industry/forms. Contractors and suppliers are advised that tenders and contracts under this OCSL may contain organization and personnel security requirements. Typically, the organization security requirement will be Designated Organization Screening (DOS) and reliability status for personnel. However more stringent requirement may apply such as Facility Security Clearance (FSC) at the level of SECRET with approved Document Safeguarding (DSC) with secret clearance for personnel. DCC may publish Advance Procurement Notices (APN) identifying potential tenders with anticipated security requirements to provide interested contractors an opportunity to begin the sponsorship request process for potentially obtaining the required security clearance(s) that are anticipated. The process to apply for a security clearance is provided in the APNs. APNs associated with upcoming contract opportunities at 8 Wing Trenton for Real Property Operations Group (RP OPS) and Canadian Forces Housing Agency (CFHA) base program can be found here:Apn_base Program, Cfb Trenton - APN_OR26SLTR | MERX DCC reserves the right to reject any application that does not demonstrate, to the sole satisfaction of DCC, that the contractor or supplier has met the stated requirements. DCC also reserves the right to request clarifications and/or confirmations from any or all firms regarding any aspect of their submission information. A written response to each such communication is required from the firm. By submitting a response to this invitation, contractors and suppliers are providing their consent, pursuant to section 30 of the Defence Production Act, for DCC to publicly disclose, after closing, their legal name, address and whether they have been included on the OCSL. The OCSL may be used for procurements covered by trade agreements to which Canada is a party. You have questions regarding the foregoing, or you wish to be removed from an OCSL, please contact: Defence Construction Canada André Champagne Andre.Champagne@dcc-cdc.gc.caBidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.
Open Construction Source List for Nunavut
Defence Construction Canada (DCC) is inviting contractors and suppliers to apply to be placed on an Open Construction Source List (OCSL) for commercial, residential, industrial, institutional, and civil work required by the Department of National Defence, in Nunavut (including sites in Iqaluit, Rankin Inlet, Alert, and North Warning System sites located in Nunavut) for three fiscal years (April 1, 2026, to March 31, 2029). Interested contractors and suppliers may request to be placed on the OCSL at any time. However, DCC is requesting that interested contractors and suppliers submit a request to be placed the OCSL as soon as possible, preferably by March 4, 2026. DCC will require ten (10) business days to process an application for the OCSL. Contractors and suppliers that want to be added to the OCSL, must submit a request through this MERX posting and therein indicate their preferred official language (English or French). IMPORTANT: Contractors and suppliers that were placed on the previous OCSL (April 1, 2023, to March 31, 2026) must re-apply to be placed on the OCSL for April 1, 2026, to March 31, 2029. The language selected by the applicant for this OCSL will be the only language used for the tender documents, the contract documents and communication for all future tenders and during the execution of any resulting contract. The language selected will apply for the duration of the OCSL. Faxed, mailed, or emailed submissions will not be accepted. The OCSL will be used to tender construction services (commercial, residential, industrial, institutional, civil) with an estimated value of $10 million and below. As "Opportunities to bid" arise, DCC will invite all contractors and suppliers on the OCSL to bid on the work. Contractors and suppliers will be invited electronically through MERX and may, at the discretion of DCC, be required to attend a site meeting prior to a tender closing. Tenders will close electronically through MERX. Contractors and suppliers who apply to be placed on the OCSL will require an active MERX account to submit electronic bids. Please contact MERX for information on how to open or reactivate an account. To bid on a tender call, a bidder must be registered on the OCSL used for the tender call. If the bidder's legal name does not appear on the OCSL, DCC may consider their bid to be non-compliant. If you change your business name, it is therefore very important that you notify DCC and consider making the change to your MERX account. DCC reserves the right, at its sole discretion, to: Continue using existing source lists that may already be in place for similar or related services such as existing Quick Response Tender (QRT) source lists, Establish other source lists for specific categories of construction services which may require different pre-qualification requirements, such as Quick Response Tender (QRT) source lists. Such other source lists will not be advertised through this OCSL. Such other source lists will be advertised openly on MERX on a case-by-case basis, Verify which contractors have submitted bids under the OCSL, verify if those that did not submit bids are still interested to be on the OCSL and remove from the OCSL those contractors that are no longer interested, Require additional pre-qualification requirements for any specific tenders done through the OCSL, Elect to post any tender openly on MERX in lieu of this OCSL if DCC deems that an open tender would provide the potential for more competition, Tenders may be set aside for Indigenous businesses in accordance with the Procurement Strategy for Indigenous Business (PSIB). In such cases, all contractors and suppliers on the Open Construction Source List (OCSL) will receive an invitation to bid; however, the MERX advertisement will clearly state that the opportunity is reserved for Indigenous businesses under PSIB. To qualify, the Indigenous business must be registered in Indigenous Services Canada’s (ISC) Indigenous Business Directory (IBD). If you are forming a Joint Venture (JV) to bid on a contract set aside for Indigenous businesses, at least one member of the JV must be listed on the OCSL, and the Indigenous business within the JV must also be registered in ISC’s Indigenous Business Directory. Failure to meet these requirements will result in the bid being deemed non-compliant, Include a requirement for sub-contracting to Indigenous businesses that must be registered under Indigenous Services Canada’s (ISC) Indigenous Business Directory. In this case, the MERX Ad specific to the invitation will clearly identify the inclusion of an Indigenous Benefits Plan (IBP). Contractors are advised that contracts awarded by DCC include measurable performance standards and requirements as detailed in form DCL81-Performance Evaluation Guidelines which is available at https://www.dcc-cdc.gc.ca/industry/forms. A contractor that receives an unacceptable or failing score may be removed from this OCSL and receive no further invitations under the OCSL. Contractors and suppliers are advised that all contracts tendered and awarded by DCC are subject to DCC’s Procurement Code of Conduct which is available for download at https://www.dcc-cdc.gc.ca/industry/forms. A contractor or a supplier that has been declared ineligible or has been suspended by Public Services and Procurement Canada under its Ineligibility and Suspension Policy and the period of ineligibility or suspension has not expired may be removed from this OCSL and received no further invitations. Contractors and suppliers are advised that DCC’s Standard Construction Contract Documents - Electronic Bidding (DCL250) will be used for opportunities under the OCSL and can be downloaded from the DCC website at: https://www.dcc-cdc.gc.ca/industry/forms. Contractors and suppliers are advised that tenders and contracts under this OCSL may contain organization and personnel security requirements. Typically, the organization security requirement will be Designated Organization Screening (DOS) and reliability status for personnel. However more stringent requirement may apply such as Facility Security Clearance (FSC) at the level of SECRET with approved Document Safeguarding (DSC) with secret clearance for personnel. DCC may publish Advance Procurement Notices (APN) identifying potential tenders with anticipated security requirements to provide interested contractors an opportunity to begin the sponsorship request process for potentially obtaining the required security clearance(s) that are anticipated. The process to apply for a security clearance is provided in the APNs. DCC reserves the right to reject any application that does not demonstrate, to the sole satisfaction of DCC, that the contractor or supplier has met the stated requirements. DCC also reserves the right to request clarifications and/or confirmations from any or all firms regarding any aspect of their submission information. A written response to each such communication is required from the firm. By submitting a response to this invitation, contractors and suppliers are providing their consent, pursuant to section 30 of the Defence Production Act, for DCC to publicly disclose, after closing, their legal name, address and whether they have been included on the OCSL. The OCSL may be used for procurements covered by trade agreements to which Canada is a party. You have questions regarding the foregoing, or you wish to be removed from an OCSL, please contact: Defence Construction Canada André Champagne Andre.Champagne@dcc-cdc.gc.caBidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.
Open Construction Source List for Northern Canada
Defence Construction Canada (DCC) is inviting contractors and suppliers to apply to be placed on an Open Construction Source List (OCSL) for commercial, residential, industrial, institutional, and civil work required by the Department of National Defence, in Northern Canada (including, but not limited to, sites in Yellowknife, Inuvik, and North Warning System sites located in the Northwest Territories and the Yukon, but excluding Nunavut and Goose Bay, NL) for three fiscal years (April 1, 2026, to March 31, 2029). Interested contractors and suppliers may request to be placed on the OCSL at any time. However, DCC is requesting that interested contractors and suppliers submit a request to be placed the OCSL as soon as possible, preferably by March 4, 2026. DCC will require ten (10) business days to process an application for the OCSL. Contractors and suppliers that want to be added to the OCSL, must submit a request through this MERX posting and therein indicate their preferred official language (English or French). IMPORTANT: Contractors and suppliers that were placed on the previous OCSL (April 1, 2023, to March 31, 2026) must re-apply to be placed on the OCSL for April 1, 2026, to March 31, 2029. The language selected by the applicant for this OCSL will be the only language used for the tender documents, the contract documents and communication for all future tenders and during the execution of any resulting contract. The language selected will apply for the duration of the OCSL. Faxed, mailed, or emailed submissions will not be accepted. The OCSL will be used to tender construction services (commercial, residential, industrial, institutional, civil) with an estimated value of $10 million and below. As "Opportunities to bid" arise, DCC will invite all contractors and suppliers on the OCSL to bid on the work. Contractors and suppliers will be invited electronically through MERX and may, at the discretion of DCC, be required to attend a site meeting prior to a tender closing. Tenders will close electronically through MERX. Contractors and suppliers who apply to be placed on the OCSL will require an active MERX account to submit electronic bids. Please contact MERX for information on how to open or reactivate an account. To bid on a tender call, a bidder must be registered on the OCSL used for the tender call. If the bidder's legal name does not appear on the OCSL, DCC may consider their bid to be non-compliant. If you change your business name, it is therefore very important that you notify DCC and consider making the change to your MERX account. DCC reserves the right, at its sole discretion, to: Continue using existing source lists that may already be in place for similar or related services such as existing Quick Response Tender (QRT) source lists, Establish other source lists for specific categories of construction services which may require different pre-qualification requirements, such as Quick Response Tender (QRT) source lists. Such other source lists will not be advertised through this OCSL. Such other source lists will be advertised openly on MERX on a case-by-case basis, Verify which contractors have submitted bids under the OCSL, verify if those that did not submit bids are still interested to be on the OCSL and remove from the OCSL those contractors that are no longer interested, Require additional pre-qualification requirements for any specific tenders done through the OCSL, Elect to post any tender openly on MERX in lieu of this OCSL if DCC deems that an open tender would provide the potential for more competition, Tenders may be set aside for Indigenous businesses in accordance with the Procurement Strategy for Indigenous Business (PSIB). In such cases, all contractors and suppliers on the Open Construction Source List (OCSL) will receive an invitation to bid; however, the MERX advertisement will clearly state that the opportunity is reserved for Indigenous businesses under PSIB. To qualify, the Indigenous business must be registered in Indigenous Services Canada’s (ISC) Indigenous Business Directory (IBD). If you are forming a Joint Venture (JV) to bid on a contract set aside for Indigenous businesses, at least one member of the JV must be listed on the OCSL, and the Indigenous business within the JV must also be registered in ISC’s Indigenous Business Directory. Failure to meet these requirements will result in the bid being deemed non-compliant, Include a requirement for sub-contracting to Indigenous businesses that must be registered under Indigenous Services Canada’s (ISC) Indigenous Business Directory. In this case, the MERX Ad specific to the invitation will clearly identify the inclusion of an Indigenous Benefits Plan (IBP). Contractors are advised that contracts awarded by DCC include measurable performance standards and requirements as detailed in form DCL81-Performance Evaluation Guidelines which is available at https://www.dcc-cdc.gc.ca/industry/forms. A contractor that receives an unacceptable or failing score may be removed from this OCSL and receive no further invitations under the OCSL. Contractors and suppliers are advised that all contracts tendered and awarded by DCC are subject to DCC’s Procurement Code of Conduct which is available for download at https://www.dcc-cdc.gc.ca/industry/forms. A contractor or a supplier that has been declared ineligible or has been suspended by Public Services and Procurement Canada under its Ineligibility and Suspension Policy and the period of ineligibility or suspension has not expired may be removed from this OCSL and received no further invitations. Contractors and suppliers are advised that DCC’s Standard Construction Contract Documents - Electronic Bidding (DCL250) will be used for opportunities under the OCSL and can be downloaded from the DCC website at: https://www.dcc-cdc.gc.ca/industry/forms. Contractors and suppliers are advised that tenders and contracts under this OCSL may contain organization and personnel security requirements. Typically, the organization security requirement will be Designated Organization Screening (DOS) and reliability status for personnel. However more stringent requirement may apply such as Facility Security Clearance (FSC) at the level of SECRET with approved Document Safeguarding (DSC) with secret clearance for personnel. DCC may publish Advance Procurement Notices (APN) identifying potential tenders with anticipated security requirements to provide interested contractors an opportunity to begin the sponsorship request process for potentially obtaining the required security clearance(s) that are anticipated. The process to apply for a security clearance is provided in the APNs. DCC reserves the right to reject any application that does not demonstrate, to the sole satisfaction of DCC, that the contractor or supplier has met the stated requirements. DCC also reserves the right to request clarifications and/or confirmations from any or all firms regarding any aspect of their submission information. A written response to each such communication is required from the firm. By submitting a response to this invitation, contractors and suppliers are providing their consent, pursuant to section 30 of the Defence Production Act, for DCC to publicly disclose, after closing, their legal name, address and whether they have been included on the OCSL. The OCSL may be used for procurements covered by trade agreements to which Canada is a party. You have questions regarding the foregoing, or you wish to be removed from an OCSL, please contact: Defence Construction Canada André Champagne Andre.Champagne@dcc-cdc.gc.ca Bidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.
APN - RP OPS and CFHA Base Program - NCR
Real Property Operations Group (Rp Ops) and Canadian Forces Housing Agency (CFHA) base program NATIONAL CAPITAL REGION (with AND WITHOUT Security Requirements) Purpose of this Advance Procurement Notice This is not a bid solicitation nor a request for proposals. In the context of the major investments announced by the Government and to foster a proactive partnership with industry, DCC is issuing this Advance Procurement Notice (APN) to inform contractors/consultants of upcoming contract opportunities at the National Capital Region including but not limited to Real Property Operations Group (RP OPS) and Canadian Forces Housing Agency (CFHA) base program. The purpose of this APN is to allow contractors and consultants to assess their capacity and interest in participating, and to prepare adequately for potential solicitation processes, notably by initiating any necessary steps. This is a preliminary notice regarding potential contracts, which may or may not include security requirements. The purpose of this APN is to allow interested contractors and consultants to initiate, if required, the sponsorship process to obtain the necessary clearances or security clearances (if applicable). Please note that certain projects may be reserved for Indigenous businesses in accordance with the Procurement Strategy for Indigenous Business (PSIB). Please note that there is no guarantee that these solicitations will proceed or that security clearances will be granted within the anticipated timelines or at all as part of the sponsorship process. DESCRIPTION OF National Capital Region (NCR) The National Capital Region (NCR) is a critical hub for Canada’s federal government and national defence operations. The region includes a wide range of Department of National Defence (DND) facilities such as operational headquarters, training centres, secure communication facilities, airfields (including CFB Uplands), and residential housing sites managed by CFHA. Real Property Operations Groups (RP OPS) supports the ongoing operation, maintenance, and modernization of defence infrastructure across the NCR, including highly specialized and secure facilities. CFHA manages residential housing units (RHUs) that support Canadian Armed Forces personnel and their families. Infrastructure in the NCR ranges from: administrative and operational buildings secure and mission-critical facilities training and logistics centres residential housing portfolios These facilities require continuous upgrades, recapitalization, and new construction to support evolving operational requirements. Description of the Projects and Services Future contracts will be subject to separate tendering or request for proposals processes and awarded through various procurement mechanisms and tools made available to DCC. Open competitive tenders or requests for proposals advertised on MERX, and CanadaBuys if they are subject to one of Canada’s trade agreements and their estimated value is equal to or above the agreement’s dollar thresholds. Open Construction Source List (OCSL) – By invitation only to the members of the OCSL. The OCSL for National Capital Region (Ottawa/Gatineau) is currently open on MERX and interested contractors are welcomed to apply. Search for OCSL No. CR26SLWA_86073 - Open Construction Source List for Ottawa and Gatineau on MERX and follow the instructions to apply. IMPORTANT: A MERX account is required to apply. Source lists (SL) – Typically used for professional services such as A&E or environmental. A source list may be local, regional, or national. Each SL is put in place via an open competitive process, advertised on MERX, and CanadaBuys where applicable. Members of the SL are then approached based on the criteria provided in the RFP to submit a proposal based on a provided Statement of Work (SOW). For most SL, the contracts are negotiated one-on-one. Standing Offer Agreement (SOA) and Standing Offer (SO) – Used for any type of services or construction and generally put in place with one of two suppliers. These tools may be local, regional, or national. Each tool is put in place via an open competitive process, advertised on MERX, and CanadaBuys where applicable or by invitation from an OCSL. Download from MERX the document included with this APN for the list of projects we anticipate soliciting as per the dates indicated in the document. This is conditional on the projects receiving approval to proceed by DND. Contract Award and Anticipated Security Requirements To be eligible for contract award, a proponent or bidder will be required to, among other things, actively hold or obtain all required security clearance(s) prior to the date of the award, as further detailed in the solicitation documents. Where applicable, the anticipated security clearance level for each contract is listed in the attached list of projects. Industrial Security Program Sponsorship Defence Construction Canada (DCC) is providing consultants or contractors early access to the security clearance application process through sponsorship under its Industrial Security Program (ISP). Accordingly, consultants or contractors that intend to submit a proposal or a bid on one or more of these projects and that do not actively hold the identified security clearance(s) should begin forthwith the security clearance application process by applying through DCC’s ISP. Under this program, DCC may, at its entire discretion, provide preliminary assistance to all the potential bidders or proponents with their respective security clearance sponsorship process. To begin the security clearance sponsorship process, please submit a sponsorship request application to DCC by following the steps identified on DCC’s website at: https://www.dcc-cdc.gc.ca/industry/security-requirements. In their sponsorship request application to DCC, consultants or contractors are asked to quote the following information, among other things: Advance Procurement Notice (APN) number (Project number on the MERX notice); Contract number or numbers as referenced in the attached table; and Level of clearance requested to be sponsored for. Sponsorship Process Upon receipt, DCC will review the sponsorship request application and will communicate directly with the consultants or contractors to provide assistance for the completion of the sponsorship request packages. Once DCC has determined, at its entire discretion, that a consultant or contractor: has started the sponsorship process prior to the solicitation(s) (Contract number(s) listed on their request for sponsorship) being advertised on MERX, has met all the material requirements of the sponsorship request package, and has submitted a proposal or a bid DCC will send the sponsorship request package to the Public Services and Procurement Canada’s (PSPC) Contract Security Program (CSP). Following receipt of the sponsorship request package, the CSP will communicate directly with the proponent or bidder regarding any further steps or actions to be undertaken or the status of the sponsorship request package processing. At such time, the proponent or bidder will need to promptly cooperate with CSP to ensure that the process is completed as soon as possible. Questions Any questions pertaining to the sponsoring process through the ISP can be addressed to: Telephone Number: (613) 998-8974; or Email address: ISP.Sponsorship@dcc-cdc.gc.ca Any questions relating to this Advance Procurement Notice can be addressed to: Priscille Vumi Leader, Contract Services Defence Construction Canada Priscille.Vumi@dcc-cdc.gc.ca 343-596-6289 Disclaimer DCC is only providing assistance, at its entire discretion, for the above stated sponsorship process and does not provide any representations or guarantees that a sponsorship request package or a security clearance application forwarded by DCC to the CSP will be successful or result in the granting of the requested security clearance(s) by the CSP. At all times, the processing of a sponsorship request package or a security clearance application is subject to the respective terms, conditions, and timelines of DCC’s ISP sponsorship process and the CSP security clearance granting process. By applying to either of the aforementioned processes, the proponent or bidder agrees to bear any fees and risks associated with: (i) the completeness or accuracy, or lack thereof, of its application or related documents submitted under or in connection with either said processes, and (ii) the timeliness, or lack thereof, of any processing or granting of security clearance(s) under or in connection with either said processes. Notwithstanding anything else stated above, DCC shall in no event be liable to the bidder or proponent for any direct, indirect, incidental, special, consequential, punitive or exemplary damages arising out or in connection with the above stated sponsorship process. DCC provides assistance only, at its sole discretion, in the sponsorship process and makes no representations or warranties regarding the acceptance of a sponsorship application or the issuance of a security clearance by the PSC. The processing of applications remains subject to the applicable terms and timelines of both the DCC and the PSC processes. By participating in these processes, applicants and bidders assume all costs and risks associated with preparing and processing their applications, including the accuracy of the information provided and the absence of any guarantee regarding obtaining the required certifications. DCC shall under no circumstances be liable for any damages, direct or indirect. Bidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.
Open Construction Source List for ASU Toronto
Defence Construction Canada (DCC) is inviting contractors and suppliers to apply to be placed on an Open Construction Source List (OCSL) for commercial, residential, industrial, institutional, and civil work required by the Department of National Defence, at ASU Toronto (and its satellite sites in Central and Southern Ontario (see list of sites below)) for three fiscal years (April 1, 2026, to March 31, 2029). ASU Toronto sites: Greater Toronto Sites: Oshawa Armoury, Oshawa Airport, Toronto Armouries, Canadian Forces College (Toronto), HMCS York (Toronto), DCCCA Airport (Mississauga), Mississauga Armouries, Scarborough Armoury, Etobicoke Armoury, Brampton Armoury, Oakville Armoury, Georgetown Armoury, Aurora Armouries, Brantford Armoury, Burlington Armoury Central Ontario Sites: Guelph Armoury, Cambridge Armoury, CFRB Hamilton, John Foote Armoury (Hamilton), Kitchener Armoury, Stratford Armoury, Waterloo Armoury, St. Catherines Armoury, St. Thomas Armoury, Welland Armoury, Winona Range Training Area Southern Ontario Sites: Wolseley Barracks (London), Chatham Armoury, Cedar Springs Range Training Area (Erieau), HMCS Hunter (Windsor), Windsor Armoury HMCS Prevost Armoury (London), HMCS Prevost Marina (Port Stanley) Interested contractors and suppliers may request to be placed on the OCSL at any time. However, DCC is requesting that interested contractors and suppliers submit a request to be placed the OCSL as soon as possible, preferably by March 4, 2026. DCC will require ten (10) business days to process an application for the OCSL. Contractors and suppliers that want to be added to the OCSL, must submit a request through this MERX posting and therein indicate their preferred official language (English or French). IMPORTANT: Contractors and suppliers that were placed on the previous OCSL (April 1, 2023, to March 31, 2026) must re-apply to be placed on the OCSL for April 1, 2026, to March 31, 2029. The language selected by the applicant for this OCSL will be the only language used for the tender documents, the contract documents and communication for all future tenders and during the execution of any resulting contract. The language selected will apply for the duration of the OCSL. Faxed, mailed, or emailed submissions will not be accepted. The OCSL will be used to tender construction services (commercial, residential, industrial, institutional, civil) with an estimated value of $10 million and below. As "Opportunities to bid" arise, DCC will invite all contractors and suppliers on the OCSL to bid on the work. Contractors and suppliers will be invited electronically through MERX and may, at the discretion of DCC, be required to attend a site meeting prior to a tender closing. Tenders will close electronically through MERX. Contractors and suppliers who apply to be placed on the OCSL will require an active MERX account to submit electronic bids. Please contact MERX for information on how to open or reactivate an account. To bid on a tender call, a bidder must be registered on the OCSL used for the tender call. If the bidder's legal name does not appear on the OCSL, DCC may consider their bid to be non-compliant. If you change your business name, it is therefore very important that you notify DCC and consider making the change to your MERX account. DCC reserves the right, at its sole discretion, to: Continue using existing source lists that may already be in place for similar or related services such as existing Quick Response Tender (QRT) source lists, Establish other source lists for specific categories of construction services which may require different pre-qualification requirements, such as Quick Response Tender (QRT) source lists. Such other source lists will not be advertised through this OCSL. Such other source lists will be advertised openly on MERX on a case-by-case basis, Verify which contractors have submitted bids under the OCSL, verify if those that did not submit bids are still interested to be on the OCSL and remove from the OCSL those contractors that are no longer interested, Require additional pre-qualification requirements for any specific tenders done through the OCSL, Elect to post any tender openly on MERX in lieu of this OCSL if DCC deems that an open tender would provide the potential for more competition, Tenders may be set aside for Indigenous businesses in accordance with the Procurement Strategy for Indigenous Business (PSIB). In such cases, all contractors and suppliers on the Open Construction Source List (OCSL) will receive an invitation to bid; however, the MERX advertisement will clearly state that the opportunity is reserved for Indigenous businesses under PSIB. To qualify, the Indigenous business must be registered in Indigenous Services Canada’s (ISC) Indigenous Business Directory (IBD). If you are forming a Joint Venture (JV) to bid on a contract set aside for Indigenous businesses, at least one member of the JV must be listed on the OCSL, and the Indigenous business within the JV must also be registered in ISC’s Indigenous Business Directory. Failure to meet these requirements will result in the bid being deemed non-compliant, Include a requirement for sub-contracting to Indigenous businesses that must be registered under Indigenous Services Canada’s (ISC) Indigenous Business Directory. In this case, the MERX Ad specific to the invitation will clearly identify the inclusion of an Indigenous Benefits Plan (IBP). Contractors are advised that contracts awarded by DCC include measurable performance standards and requirements as detailed in form DCL81-Performance Evaluation Guidelines which is available at https://www.dcc-cdc.gc.ca/industry/forms. A contractor that receives an unacceptable or failing score may be removed from this OCSL and receive no further invitations under the OCSL. Contractors and suppliers are advised that all contracts tendered and awarded by DCC are subject to DCC’s Procurement Code of Conduct which is available for download at https://www.dcc-cdc.gc.ca/industry/forms. A contractor or a supplier that has been declared ineligible or has been suspended by Public Services and Procurement Canada under its Ineligibility and Suspension Policy and the period of ineligibility or suspension has not expired may be removed from this OCSL and received no further invitations. Contractors and suppliers are advised that DCC’s Standard Construction Contract Documents - Electronic Bidding (DCL250) will be used for opportunities under the OCSL and can be downloaded from the DCC website at: https://www.dcc-cdc.gc.ca/industry/forms. Contractors and suppliers are advised that tenders and contracts under this OCSL may contain organization and personnel security requirements. Typically, the organization security requirement will be Designated Organization Screening (DOS) and reliability status for personnel. However more stringent requirement may apply such as Facility Security Clearance (FSC) at the level of SECRET with approved Document Safeguarding (DSC) with secret clearance for personnel. DCC may publish Advance Procurement Notices (APN) identifying potential tenders with anticipated security requirements to provide interested contractors an opportunity to begin the sponsorship request process for potentially obtaining the required security clearance(s) that are anticipated. The process to apply for a security clearance is provided in the APNs. APNs associated with upcoming contract opportunities at Garrison Toronto for Real Property Operations Group (RP OPS) base program can be found here:Apn_base Program, Toronto And Across Ontario - APN_OR26SLTT | MERX DCC reserves the right to reject any application that does not demonstrate, to the sole satisfaction of DCC, that the contractor or supplier has met the stated requirements. DCC also reserves the right to request clarifications and/or confirmations from any or all firms regarding any aspect of their submission information. A written response to each such communication is required from the firm. By submitting a response to this invitation, contractors and suppliers are providing their consent, pursuant to section 30 of the Defence Production Act, for DCC to publicly disclose, after closing, their legal name, address and whether they have been included on the OCSL. The OCSL may be used for procurements covered by trade agreements to which Canada is a party. You have questions regarding the foregoing, or you wish to be removed from an OCSL, please contact: Defence Construction Canada André Champagne Andre.Champagne@dcc-cdc.gc.caBidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.