Skip to content
SAM.govCloses in 11 days

Electro-Therapeutic Modalities for Pain Management (ETMPM) - Transcutaneous Electrical Nerve Stimulation (TENS) Procurement Program

Location
Golden, United States
Responses due
Oct 19, 2026

Overview

Solicitation Notice: 36C79126R0011 – Electro-Therapeutic Modalities for Pain Management (ETMPM) – Transcutaneous Electrical Nerve Stimulation (TENS) Procurement Program Notice Type: Solicitation Issuance Notice Solicitation Number: 36C79126R0011 Posted Date: September 18, 2026 Response Due Date: October 19, 2026, 3:00 PM Central Daylight Time (CDT) NAICS Code: 334510 – Electromedical and Electrotherapeutic Apparatus Manufacturing. The Small Business size standard for NAICS Code 334510 is 1,250 employees. This NAICS code is appropriate as it encompasses the manufacturing of FDA?regulated electromedical therapeutic equipment including TENS, IFC, neuromodulation, and diathermy devices. PSC: 6515 – Medical and Surgical Instruments, Equipment, and Supplies Set-Aside: The Tiered Set-Aside Evaluation Approach used by the VA is not classified as a traditional Small Business set-aside, but rather as a competitive negotiated procurement, conducted via a tiered evaluation process aimed at prioritizing award to successive small business categories. This acquisition will be conducted using the VA Tiered Set?Aside Evaluation Approach pursuant to the authority of 38 U.S.C. 8127, including the statutory priority ordering prescribed in 38 U.S.C. §?8127(h) (a subsection of the Veterans First Contracting Program statute) and the procedures outlined in Veteran Affairs Acquisition Regulation (VAAR) 815.101?370 (Class Deviation). Under this approach, the Government will solicit offers from all tiers of Offerors simultaneously; however, proposal evaluations and award determination will occur sequentially in the prescribed order of priority. The tiers for this procurement are as follows: Tier-1 Service?Disabled Veteran?Owned Small Business (SDVOSB): SDVOSBs shall be evaluated first in accordance with VA’s statutory obligation to prioritize verified SDVOSBs when the VA Rule of Two is met. If no award can be made at Tier-1, then verified VOSB offers will be evaluated next in Tier-2, consistent with the Veterans First hierarchy. Tier-2 Veteran?Owned Small Business (VOSB): If no award can be made at Tier 2, the Government will evaluate offers from all other eligible small business concerns, (e.g., 8(a), HUBZone, and WOSB are considered before considering other small business concerns), in Tier 3 following the tiering procedures established in VAAR 815.101-3 and VAAR 815.101-370 (Class Deviation). Tier-3 Other Small Business Concerns: If no award can be made at Tier-3, the Government will evaluate offers from all Other-Than-Small-Business (OTSB) Concerns (Large Businesses)) in Tier 4 following the tiering procedures established in VAAR 815.101?3 and 815.101?370 (Class Deviation). Tier-4 Other?Than?Small Business (OTSB) Concerns (Large Businesses): If no award can be made under any small business Tier 1 through 3, the Government will evaluate offers from other?than?small businesses or large business concerns in Tier 4. This tiered evaluation methodology is authorized under 38 U.S.C. 8127 and implemented through the VA’s Class Deviation to VAAR 815.101?370, which permits the use of tiered set?aside procedures to minimize procurement delays in situations where market research indicates that award at the SDVOSB or VOSB tiers is uncertain. Contracting Office: Department of Veterans Affairs, Enterprise Procurement Office, Acquisition Service Four Delta Team, 555 Corporate Circle, Golden, CO 80401-5621. Introduction: The Department of Veterans Affairs (VA) is pleased to announce the release of Solicitation Number 36C79126R0011, the official Request for Proposals (RFP) for the Electro-Therapeutic Modalities for Pain Management (ETMPM) – Transcutaneous Electrical Nerve Stimulation (TENS) Procurement Program. The objective of this national procurement program is to establish multiple single-awards of Firm-Fixed-Price (FFP), Indefinite Delivery/Indefinite Quantity (IDIQ) Base contracts and resultant FFP/IDIQ Delivery Order contracts to be awarded on a per-Contract Line Item Number (CLIN) and per-Sub-Line Item Number (SLIN) basis for the procurement of FDA-cleared electro-therapeutic devices and accessories supporting non-opioid pain management for Veterans across all VA Medical Centers and Community-Based Outpatient Clinics. This solicitation recompetition of the expiring legacy TENS contract and expands the legacy TENS procurement program to include Interferential Current Therapy (IFC) devices, Short-Wave Diathermy (SWD) devices (thermal and non-thermal), and portable Neuromodulation systems - for the treatment of headache disorders to be inclusive all unique parent CLIN devices and the device accessories has enumerated at the discrete subordinate SLINs. The device accessories categorized as SLINs include but are not limited to electrodes, lead wires, power chargers, garment-based applicators, and associated other consumables. Each product of the ETMPM-TENS requirement is mapped to unique parent CLIN and a discrete subordinate SLINs with universal Minimum Technical Requirements (MTRs) applicable to all CLINs/SLINs and individual CLIN/SLIN-specific MTRs. Key Dates: RFP Questions Due-In Date: On or before but no later than October 5, 2026, at 3:00 PM CDT, questions received after this deadline may receive a Government response or receipt acknowledgement. Proposal Package and Product Samples Due-In Date: On or before but no later than October 19, 2026, at 3:00 PM CDT. Early proposal package and product samples are encouraged. Anticipated Award: The results of competition ultimately determine when and if award(s) can be made, but the VA intends to finalize award decisions on or before but no later than January 19, 2027, the expiration date of the legacy TENS contract. The VA reserves the right not to make an award or to make award on some CLINs/SLINs but not all the CLINs/SLINs enumerated in the solicitation. Proposal Package Submission Instructions: A responsive proposal is one that conforms to the solicitation in all material respects and complies fully with all instructions contained therein, including but not limited to Offerors’ certifications, representations, submission formatting, inclusion of all mandatory documentation, and the shipment of product samples to the VA’s Denver Logistic Services facility in Golden, Colorado in accordance with the product samples delivery requirements as stated throughout the RFP. Submission of a proposal package in response to Solicitation Number 36C79126R0011 is strictly voluntary. All costs associated with the preparation, development, and submission of proposals, proposal package documentation, and any required product samples shall be borne solely by the Offeror. The Department of Veterans Affairs will not reimburse, compensate, or otherwise pay Offerors for any expenses incurred in the preparation or submission of proposal materials or product samples. Offerors shall not invoice the Government for such costs. All proposal preparation and submission activities are performed at the Offeror’s own expense. Policy Note: In the event of a conflict between this Solicitation Notice posted at the Government-wide Point of Entry (GPE) website at https://www.sam.gov and solicitation number 36C79126R0011, the solicitation shall prevail, govern, and control. Proposal Packages must include but are not limited to the following: Properly Executed SF 1449: Complete the name/title, signature, and date signed Blocks 30a–30c of the SF 1449. Complete the information entries of all Section B Continuation Pages to include filling in all required YELLOW highlighted text fields for the Offeror’s primary point of contact. Include the fully executed SF 1449 as a separate document attachment to the proposal submission email message. Submission of a Technical Capability Statement: All Offerors shall submit a Technical Capability Statement that adequately demonstrates the Offeror’s capability to fulfill all universal MTRs and the CLINs/SLINs-specific MTRs for all offered products and adequately demonstrates the Offeror’s clear and complete understanding of the ETMPM-TENS requirement and the Offeror’s capability to deliver the required products as ordered within 30 calendar days of order receipt. The Technical Capability Statement shall be submitted as a separate document attachment to the proposal submission email message. OEM-issued Authorized Distributor Letters (Required for all Non-Manufacturers): Submit a current, valid OEM-issued Authorized Distributor Letter(s) accounting for all non-manufacturer products on a per-CLIN/SLIN basis. The OEM-issued Authorized Distributor Letters shall be submitted as a separate document attachment to the proposal submission email message. FDA Clearance Letters: All Offerors shall submit valid FDA 510(k) clearance letters/documentation or other applicable FDA authorization for every device and accessory offered on a per-CLIN/SLIN basis. The FDA Clearance Letters shall be submitted as a separate document attachment to the proposal submission email message. Past Performance Documentation: All Offerors shall submit the three (3) most recent official CPARS Evaluation Reports, if an Offeror is unable to submit completed CPARS Evaluation Reports due to a lack of past performance, the Offeror shall submit Past Performance Questionnaires (PPQs) completed by the Offeror’s three (3) most recent customers. All Offerors shall submit three (3) past performance documents for Government evaluation that may consist of a combination of official CPARS Evaluation Reports and/or Past Performance Questionnaires (PPQs). The PPQs shall be completed and submitted by the Offeror’s customer(s) directly to the VA’s Contract Specialist via separate document attachments to the PPQs submission email message. The Offeror submitted CPARS Evaluation Reports shall be submitted as a separate document attachment(s) to the proposal submission email message. Product Samples: All Offerors shall ship a product sample for every product offered on a per-CLINs/SLINs basis at no cost to the Government. Ship all required product samples for each proposed CLIN/SLIN to: Department of Veterans Affairs Denver Logistics Service (DLS) 555 Corporate Circle, Golden, CO 80401-5621 Attention: Javier Ramirez and Lisa Mello RFP Number 36C79126R0011 All product samples must be received by the Government personnel at the VA’s DLS facility on or before but no later than the common due-in date/time established for the receipt of all proposal submission in response to the issuance of Solicitation Number 36C79126R0011. The early submission of product samples is encouraged. All Required Solicitation Attachments: All Offerors are required to complete, certify, and submit all solicitation attachments (Attachment 0001 - Price Matrix, Attachment 0002- Offeror’s Representations and Certifications, Attachment 0003 - Limitations on Subcontracting, Attachment 0004 - Buy American Certificate, Attachment 0005 - Trade Agreements Certificate, and Attachment 0006 - Past Performance Questionnaire - utilized by Offerors on an as needed basis). The Attachments to this solicitation shall be submitted as a separate document attachment(s) to the proposal submission email message. Policy Note: If any conflict exists between offered end-product country-of-origin (COO) entries in Attachment 0002 (FAR 52.212-3) and Attachments 0004 (FAR 52.225-2) or 0005 (FAR 52.225-6), the entries in Attachments 0004 and 0005 shall govern for end-product COO eligibility and evaluation under FAR Part 25. The VA will rely on CLIN/SLIN-level COO declarations in these attachments for Buy American Act and Trade Agreements Act compliance. Proposal Package Documentation Submission Method: Submit all proposal documents electronically by email message with attached documents to: John Overstake, Primary Contract Specialist: john.overstake@va.gov; Carbon Copy (“CC”): Alternate Contract Specialist Susanna Huffmaster: susanna.huffmaster@va.gov>maurice.walker@va.gov; Carbon Copy (“CC”): Maurice Walker, Contracting Officer and Source Selection Authority: maurice.walker@va.gov; Use Email Subject Line: “Proposal Submission – RFP 36C79126R0011 – [Offeror Name]”; and The VA will confirm receipt of proposal packages by brief email reply message. Evaluation and Award Methodology: CLINs/SLINs X001–X004: Evaluated using Lowest Price Technically Acceptable (LPTA) source selection procedures. CLIN/SLIN X005 and X005AA: Evaluated using Best Value – Tradeoff source selection procedures. Responsiveness: Only proposals meeting all material requirements as stated in solicitation number 36C79126R0011 will be evaluated and considered for award. RFP Questions & Government Responses: All questions regarding this RFP must be submitted in writing by email message only addressed to John Overstake at email address john.overstake@va.gov, with a carbon copy (“CC”) message to Susanna Huffmaster: susanna.huffmaster@va.gov and a carbon copy (“CC”) message to maurice.walker@va.gov. All Offerors’ RFP questions shall be received on or before but no later than October 5, 2026, at 3:00 PM CDT. The VA will acknowledge receipt of all timely questions received. All Government responses to timely questions shall be posted on the GPE website at https://www.sam.gov on or before but no later than the common due-in date/time established for the receipt of all proposal submission in response to the issuance of Solicitation Number 36C79126R0011. Questions received after the established deadline for the receipt of all questions to the Government in response to the issuance of Solicitation Number 36C79126R0011 may not receive a Government receipt acknowledgement and may not receive a Government response at the sole discretion of the Government. Closing Statement: The Department of Veterans Affairs (VA) sincerely thanks all prospective Offerors for their interest and the significant effort required to prepare and submit responsive proposals. The VA recognizes the substantial commitment time, effort, and resources involved and commends your dedication to supporting our mission. Together, we serve those who have served our great nation with honor, courage, and commitment. It is our privilege to partner with industry participants in delivering the highest quality healthcare and support of America’s Veterans. For full details, instructions, and all solicitation documents, please download the complete RFP package and all six (6) solicitation attachments from this posting. (End of Solicitation Notice 36C79126R0011)

Source: SAM.govView in Constructeams

Similar open bids

SAM.govCloses today

CO NP BLCA 10(1) South Rim Drive

This is a Request for Quote. Plans and specifications are available. PROJECT NUMBER: CO NP BLCA 10(1) PROJECT NAME: South Rim Drive Improvement PROJECT DESCRIPTION: The National Park Service (NPS) has an immediate safety requirement to restore roadside protection along South Rim Drive following damage sustained during last year's wildfire event. The purpose of this project is to remove remaining roadside hazards and install modern, crash-tested safety barriers to restore the corridor to safe operating conditions prior to peak visitor seasons. SCOPE OF THE WORK: The contractor shall provide all labor, materials, equipment, and supervision necessary to execute guardrail removal, site preparation, and installation across twelve (12) distinct locations along South Rim Drive. Principal work elements include, but are not limited to, the following: Selective Boulder Removal & Dispersal: Carefully remove, relocate, or safely set aside existing large boulder barriers at specified curves out of the active road prism/clear zone in accordance with park cultural and aesthetic boundaries. Site Grading & Base Preparation: Execute minor grading, shoulder stabilization, and post-hole excavation at the 12 designated locations to prepare the roadside for barrier placement. Specialized Guardrail Procurement & Installation: Supply and install steel guardrail systems featuring a weathered-look finish and structural treatments (e.g., Natina stain coatings). Traffic Control & Sequencing: Provide comprehensive traffic control, including active one-lane closures and flagging operations, to accommodate construction activities while maintaining safety for park staff and public visitors. Prospective bidders are advised that the specialized weathered-look guardrail steel and required aesthetic coatings carry extended procurement windows (up to an 8-week lead time plus required material curing periods). Contract duration and ordering timelines are structured to accommodate this supply chain restriction. To maximize productivity and account for high-altitude weather volatility, construction operations are anticipated to launch in early Spring (April), utilizing a combination of full road closure windows (pre-opening) and transitioning to active one-lane traffic control configurations following the seasonal opening of the roadway. ANTICIPATED SCHEDULE: Advertisement: Mid-September 15, 2026 Award: Mid-October 2026 Notice to Proceed (NTP): Mid-October 2026 (Allows the contractor to immediately order the guardrail to absorb the 8-week lead time/curing window over the winter) Construction: Early April 2027 – Late May 2027 ESTIMATED COST RANGE: The estimated bid range for Schedule A is between $700,000 and $2,000,000.

MontrosePaving Asphalt
Due Oct 8, 2026View bid
NYC City RecordCloses today

SMD_Services IDIQ Contract for Annual Cleaning and Inspection of Gravity Roof Tanks at Various NYCHA Buildings, Citywide

Scope of Work:  The annual inspection, cleaning and disinfection of roof tanks on NYCHA properties in compliance with all applicable New York City, New York State, and Federal regulations. at various developments citywide. All work shall comply with applicable laws, codes and standards, including but not limited to NYC Health Code §§ 141.07 & 141.09, Rules of the City of New York, Title 24, Chapter 31, NYC Administrative Code § 17-194, Plumbing Code §§ 606.5 / 606.5.4.3, NYS Sanitary Code, Part 5, ANSI/AWWA/APHA/WEF Industry Standards, Safe Drinking Water Act (SDWA), §28-301.1 of the NYC Construction Code, NYC Local Law 76, Occupational Safety and Health Administration (OSHA) as well as any other regulatory requirements that pertain to gravity water tanks (roof tanks) within the city of New York. Each tank shall be inspected, cleaned, disinfected and sampled for E.Coli and Total Coliform at a minimum annually during each one (1) year period of this contract. Tanks may be cleaned and sampled multiple times a year. Contract Term: 3 years from the award date on NYCHAs Purchase Order.  NYCHA, in its sole discretion, shall have the option to extend the Term of this Contract for up to 2 one-year renewals. Bid Security: 100% of Contract Minimum. Payment & Performance Bonds: 100% of Minimum. Labor Law 220i Public Work Registration Certificate/Certification: Pursuant to Article 8, Section 220-i of the New York State Labor Law. The Bidder and each subcontractor must be registered with the New York State Department of Labor. See https://dol.ny.gov/contractor-and-subcontractor-landing.  For additional information refer to the Important Bid Notice document attachment included in this RFQ.  This Solicitation is not subject to PLA. This solicitation does not require PQL. Section 3 Resident Economic Opportunity Plan: Section 3 Resident Economic Opportunity (REO) Plan must be submitted via eComply, https://nycha.ecomply.us/. Do not include Section 3 documentation within bid submission via iSupplier. For eComply log-in assistance contact eComply Tech support, support@ecomplysolutions.com. For Section 3 submission assistance contact NYCHAs SMP Vendor Support team at eComply.support@nycha.nyc.gov  Pre-Bid Conference: A non-mandatory, but strongly recommended, MS Teams Pre-bid Conference will be held on September 9, 2026, at 1:00 PM  To join us, please follow the instructions below: Option 1: Click the following link or copy, and paste and go it into a new web browser: https://teams.microsoft.com/meet/284356622821641?p=SIlxBEu2AMZmRVxu4a Meeting ID: 284 356 622 821 641 Passcode: fk9AV7Yt Option 2: Dial in by phone +1-646-838-1534 United States, New York City Phone conference ID: 638894668# RFQ Question Submission Deadline: September 16, 2026 Questions regarding this RFQ should be sent to the following email address: construction.procurement@nycha.nyc.gov. Question & Answer Release Date: September 23, 2026. Only questions regarding this RFQ submitted to construction.procurement@nycha.nyc.gov (include RFQ number in subject field) prior to Question Deadline will be accepted. In addition to the documents attached below, bidders are directed to review the Special Notices and Conditions, Instructions to Bidders, and General Conditions prior to submitting a bid.  To access these documents, click on the 'Contract Terms' tab above, and then 'Preview Contract Terms,' to download a PDF version. Prior to submitting a bid, confirm the bid response includes all required forms and documentation and that all are properly completed, signed, and notarized, where applicable. It is the bidders sole responsibility to complete and submit its bid via iSupplier to the corresponding RFQ prior the RFQ Bid Submission Deadline. NYCHA is not responsible for delays caused by technical difficulty or caused by any other occurrence. Only electronic bids submitted online via iSupplier will be accepted. For assistance regarding iSupplier please email NYCHA Procurement at procurement@nycha.nyc.gov. Please note that if NYCHA receives no responses to this RFQ, the bid submission deadline shall be automatically extended for seven (7) days. This does not limit NYCHA's right to extend the bid deadline for any other reason. Current Prevailing Wage Links are posted on iSupplier under the Quick Links Section of Sourcing Supplier.  The vendors are responsible for remaining informed of all updates to the Prevailing Wage Schedule.

New York
Due Oct 8, 2026View bid
NYC City RecordCloses today

SMD_Services_Indefinite Delivery Indefinite Quantity (IDIQ) Contract for Repair of Gravity Roof Tanks (Office of Water Quality) at Various NYCHA Buildings Citywide

Scope of Work: The scope of work includes repairing any leaks, cracks, or damage found in wooden or steel gravity tanks, including but not limited to conical covers, flat decking, hatch doors, ladders, plugs, strainers, piping, plumbing components, valves, electrical systems, probes, control wiring, conduit, co applicable city, state, and federal codes, regulations, all materials, equipment, and workmanship used in these repairs shall comply with all relevant city, state, and federal codes, as well as applicable regulations and industry standards governing construction, safety, and domestic water systems. Contract Term: three years from the award date on NYCHAs Purchase Order.  NYCHA, in its sole discretion, shall have the option to extend the Term of this Contract for up to two one-year renewals. Bid Security: 100% of Contract Minimum ($50,000). Payment & Performance Bond:100% of Minimum ($50,000). Labor Law 220i Public Work Registration Certificate/Certification: Pursuant to Article 8, Section 220-i of the New York State Labor Law .The Bidder and each subcontractor must be registered with the New York State Department of Labor. https://dol.ny.gov/contractor-and-subcontractor-landing.  For additional information refer to the Important Bid Notice document attachment included in this RFQ. This Solicitation is not subject to PLA. This solicitation does not require PQL. Section 3 Resident Economic Opportunity Plan: Section 3 Resident Economic Opportunity (REO) Plan must be submitted via eComply, https://nycha.ecomply.us/. Do not include Section 3 documentation within bid submission via iSupplier. For eComply log-in assistance contact eComply Tech support, support@ecomplysolutions.com. For Section 3 submission assistance contact NYCHAs SMP Vendor Support team at eComply.support@nycha.nyc.gov. Pre-Bid Conference: A non-mandatory, but strongly recommended, MS Teams Pre-Bid Conference will be held on September 9, 2026, at 3:00 PM, and will be conducted remotely via Microsoft Teams meeting. To join us, please follow the instructions below: Option 1: Click the following link or copy, and paste and go it into a new web browser: Join: https://teams.microsoft.com/meet/247843415108182?p=s7S895ctg6lwFXC4rX Meeting ID: 247 843 415 108 182 Passcode: f4oN2E3n Option 2: Dial in by phone +1 646-838-1534,,168007653# United States, New York City Phone conference ID: 168 007 653# RFQ Question Submission Deadline: September 16, 2026 Questions regarding this RFQ should only be sent to the following email address: construction.procurement@nycha.nyc.gov.  Question & Answer Release Date: September 23, 2026 Prior to submitting a bid, confirm the bid response includes all required forms and documentation and that all are properly completed, signed, and notarized, where applicable. It is the bidders sole responsibility to complete and submit its bid via iSupplier to the corresponding RFQ prior the RFQ Bid Submission Deadline. NYCHA is not responsible for delays caused by technical difficulty or caused by any other occurrence. Only electronic bids submitted online via iSupplier will be accepted. For assistance regarding iSupplier please email NYCHA Procurement at procurement@nycha.nyc.gov. Please note that if NYCHA receives no responses to this RFQ, the bid submission deadline shall be automatically extended for seven (7) days. This does not limit NYCHA's right to extend the bid deadline for any other reason. Current Prevailing Wage Links are posted on iSupplier under the Quick Links Section of Sourcing Supplier.  The vendors are responsible for remaining informed of all updates to the Prevailing Wage Schedule.

New York
Due Oct 8, 2026View bid
NYC City RecordCloses today

SMD_A&CM_RFQ #517985 - Elevator Rehabilitation at Cassidy Lafayette/Woodson Houses

Scope of Work * The Work under this Contract (RFQ No. 517985  Elevator Package) consists of the rehabilitation, modernization, maintenance, and service of twelve (12) elevators across six (6) residential buildings, including eight (8) elevators in four (4) buildings at Cassidy-Lafayette Houses and four (4) elevators in two (2) buildings at Woodson Houses. The Contractor shall provide all labor, materials, equipment, supervision, and incidental services necessary to complete the Work in accordance with the Contract Documents. * The scope includes, but is not limited to, the removal and replacement of existing elevator systems and the furnishing and installation of new elevator equipment, including machines, controls, hoistway components, car enclosures, doors, rails, communication systems, safety devices, and associated electrical components. The Work also includes testing, inspection, commissioning, training, and coordination with NYCHA and other trades, including a separate electrical package. * The Work shall be performed in phased construction to maintain building operations, with coordination requirements intended to minimize service interruptions and impacts to residents. The Contractor shall comply with all scheduling, outage duration, and performance requirements established in the Contract Documents. * In addition to construction and modernization activities (Part A), the Contractor shall enter into a separate Maintenance and Service Agreement (Part B) to provide ongoing elevator maintenance and support services following completion of modernization.   RFQ Solicitation Timetable A non-mandatory virtual pre-bid conference will be held on 09/23/2026 at 11:00 am, via Microsoft Teams. Pre bid Teams Meeting information: (646) 838-1534 Conference ID: (232 863 912 982 698) Passcode: nx9B2q4T. Although attendance is not mandatory; it is strongly recommended that all interested vendors attend. https://teams.microsoft.com/meet/232863912982698?p=fwqq9XfVdWnGivNGMi All questions related to this RFQ are to be submitted via email to the A&CM Procurement Unit at acm.procurement@nycha.nyc.gov with the RFQ number as the Subject line by no later than 09/25/2026 on 2:00PM Bidders will be permitted to ask additional questions at the Pre-bid Conference. Responses to all submitted questions will be available for public viewing in Sourcing under the RFQ. Bid Submission Requirements Vendors shall electronically upload a single .pdf containing ALL components of the bid into iSupplier by the RFQ Bid Submission Deadline. NYCHA will NOT accept hardcopy Bids or bids via e-mail, fax, or mail. Instructions for registering for iSupplier can be found at http://www1.nyc.gov/site/nycha/business/isupplier-vendor-registration.page After Bidder registers for iSupplier, it typically takes 24 to 72 hours for Bidders iSupplier profile to be approved. Site Visits - September 24, 2026 RFQ Question Deadline - September 25, 2026 - 02:00 PM Question and Answer Release Date - October 01, 2026  It is Vendors sole responsibility to complete iSupplier registration and submit its Bid before the RFQ Bid Submission Deadline. NYCHA is not responsible for delays caused by technical difficulty or caused by any other occurrence. For assistance regarding iSupplier please email Procurement@nycha.nyc.gov

New York
Due Oct 8, 2026View bid
SAM.govCloses today

KB Duct List

Salient Characteristics SpecificationTitle: Galvanized Steel Quick-Disconnect Ductwork and Components for Air-Conditioning SystemSubject: Supply of modular galvanized steel quick-disconnect ductwork, fittings, dampers, and support hangers.Basis of Design: The part numbers below are for reference and configuration cross-reference. Products offered may be from another acceptable manufacturer, provided they meet or exceed all salient characteristics and are fully compatible with the complete ductwork system.1. Scope and PurposeThis requirement is for the supply and delivery only of galvanized steel, modular quick-disconnect ductwork and associated fittings for an air-conditioning system. The supplied components shall form a mutually compatible duct system consisting of straight duct sections, reducers, wye connectors, elbows, airflow dampers, and saddle hangers.Installation, field fabrication, field welding, and connection to existing equipment are not included unless specifically added elsewhere in the solicitation.2. General Salient Characteristics. All offered items shall meet the following minimum requirements: Material: Items 1 through 26 shall be galvanized steel only. No stainless steel, aluminum, plastic, or uncoated carbon-steel substitutes shall be accepted.System Compatibility: All duct, fittings, dampers, and hangers shall be compatible with the specified quick-disconnect duct system. Components of the same nominal duct diameter shall connect directly without adapters, field welding, rivets, sheet-metal screws, or permanent field modification.Quick-Disconnect Connection: Straight duct sections, reducers, wye connectors, elbows, tees, and dampers shall use a quick-disconnect connection configuration compatible with the remaining supplied components. Connection features shall permit assembly and disassembly of the duct system without damage to the duct or fittings.Nominal Dimensions: Duct diameters and fitting dimensions listed in the schedule are nominal inside diameters unless the manufacturer???s standard quick-disconnect system identifies dimensions differently. Reducers shall transition between the listed inlet and outlet diameters. Fittings shall be sized to directly mate with the corresponding duct diameter.Gauge Requirements: Straight duct sections and dampers shall be 20-gauge galvanized steel where identified in the schedule. Reducers, elbows, wye connectors, tees, and 90-degree fittings shall be 18-gauge galvanized steel where identified in the schedule. Saddle hangers shall be 14-gauge galvanized steel where identified in the schedule.Quality and Condition: Products shall be new, free of corrosion, dents, sharp edges, cracks, deformation, damaged coating, or manufacturing defects that would prevent proper assembly or service. Duct sections shall be round, and fittings shall retain their intended shape to allow proper connection. Components shall be packaged and shipped to prevent damage or distortion in transit.Equal Products: An offered equal product shall meet every listed dimensional material, gauge, connection, configuration, and quantity requirement. The offeror shall provide manufacturer specifications or product literature sufficient to verify compliance when requested.3. Required Items ScheduleItem. Required Item / Salient Characteristics. Minimum Material / Gauge. Qty. Reference No.*1. Quick-disconnect straight duct, nominal 24-inch diameter. Galvanized steel, 20 ga 17 EA 10024.2. Quick-disconnect reducer, 24-inch inlet to 22-inch outlet Galvanized steel, 18 ga 5 EA 16024.3. Quick-disconnect straight duct, nominal 22-inch diameter Galvanized steel, 20 ga 20 EA 10022.4. Quick-disconnect reducer, 22-inch inlet to 20-inch outlet Galvanized steel, 18 ga 5 EA 16022.5. Quick-disconnect straight duct, nominal 20-inch diameter Galvanized steel, 20 ga 17 EA 10020.6. Quick-disconnect reducer, 20-inch inlet to 18-inch outlet Galvanized steel, 18 ga 5 EA 16020.7. Quick-disconnect 45-degree wye connector, nominal 24-inch duct size Galvanized steel, 18 ga 1 EA 14224.45.8. Quick-disconnect 45-degree elbow, nominal 22-inch duct size Galvanized steel, 18 ga 1 EA 12022.45.9. Quick-disconnect manual butterfly valve airflow damper, nominal 22-inch duct size Galvanized steel, 20 ga 1 EA 19422.10. Quick-disconnect straight duct, nominal 18-inch diameter Galvanized steel, 20 ga 28 EA 10018.11. Quick-disconnect tee, 18-inch ?? 18-inch ?? 18-inch Galvanized steel, 18 ga 1 EA 14318.12. Quick-disconnect straight duct, nominal 16-inch diameter Galvanized steel, 20 ga 19 EA 10016.13. Quick-disconnect reducer, 18-inch inlet to 16-inch outlet Galvanized steel, 18 ga 3 EA 16018.14. Quick-disconnect 45-degree elbow, nominal 16-inch duct size Galvanized steel, 18 ga 2 EA 12016.45.15. Quick-disconnect manual butterfly valve airflow damper, nominal 16-inch duct size Galvanized steel, 20 ga 2 EA 19416.16. Quick-disconnect 90-degree elbow, nominal 20-inch duct size Galvanized steel, 18 ga 2 EA 12020.90.17. Saddle hanger sized for nominal 24-inch duct Galvanized steel, 14 ga 14 EA 17024.18. Saddle hanger sized for nominal 22-inch duct Galvanized steel, 14 ga 14 EA 17022.19. Saddle hanger sized for nominal 20-inch duct Galvanized steel, 14 ga 14 EA 17020.22. 16-inch galvanized clamp with white nitrile gasket, 27 EA 13016-GA-N.23. 18-inch galvanized clamp with white nitrile gasket, 30 EA 13018-GA-N.24. 20-inch galvanized clamp with white nitrile gasket, 25 EA 13020-GA-N.25. 22-inch galvanized clamp with white nitrile gasket, 28 EA 13022-GA-N.26. 24-inch galvanized clamp with white nitrile gasket, 24 EA 13024-GA-N.*Reference numbers are not brand-name requirements and are included only to identify the intended configuration and compatibility standard. Galvanized Ducting shall be Standard 5-feet Lengths and 11-inch Galvanized Standard Adjustable Sleeves where applicable.4. Component-Specific Requirements shall be galvanized steel:4.1 Saddle Hangers (items 17-21) used for handing duct systems and reducing sway Shall be nominal 24-inch diameter 14 ga 14 EA 17024, 22-inch diameter 14 ga 14 EA 17022, 20-inch diameter 14 ga 14 EA 17020, 18-inch diameter 14 ga 18 EA 17018, or 16-inch diameter 14 ga 14 EA 17016, as identified in the item schedule. Shall use the required quick-disconnect end configuration.4.2 Reducers Shall be galvanized steel, 18 gauge. Shall provide the listed nominal transitions: 24 x 22 inches, 22 x 20 inches, 20 x 18 inches, and 18 x 16 inches. Shall have quick-disconnect ends compatible with the adjoining duct sections.4.3 Elbows, Wye Connector, and Tee, shall be galvanized steel, 18 gauge. Shall have the listed nominal diameter and directional configuration. The wye connector and applicable elbows shall be 45 degrees as listed. The 20-inch elbow shall be 90 degrees. The tee shall be 18 inches ?? 18 inches ?? 18 inches. All ends shall be compatible with the required quick-disconnect duct system.4.4 Airflow Dampers Shall be galvanized steel, 20 gauge. Shall be sized for 22-inch or 16-inch nominal quick-disconnect duct, as identified in the item schedule. Shall be suitable for controlling airflow within the compatible duct system. 4.5 Saddle Hangers Shall be galvanized steel, 14 gauge. Shall be contoured and sized to support the corresponding nominal duct diameter without crushing, deforming, or damaging the duct. Shall be suitable for attachment to the Government???s selected overhead support method. 5. Inspection and Acceptance the Government may inspect delivered items for: Correct item type, nominal size, gauge, and quantity; Galvanized-steel construction; Compatibility of quick-disconnect connections among offered components; Required elbow, wye, tee, reducer, damper, and hanger configurations; Damage, deformation, corrosion, or deficient protective packaging; and Manufacturer literature or other documentation supporting compliance with the salient characteristics. Items that do not meet the stated requirements may be rejected.

United States
Due Oct 8, 2026View bid
SAM.govCloses today

Sources sought for Blood and Blood Products for QNBMHF in Belcourt ND 58316.

Sources Sought: Provide blood and blood products to the Quentin N. Burdick Memorial Healthcare Facility (QNB) in Belcourt North Dakota. Sources Sought Notice Number: IHS-SS-26-1524548 This Sources Sought Notice is for informational and planning purposes only and shall not be construed as a solicitation, an obligation or commitment by the Indian Health Service. This notice is intended strictly for market research to determine the availability of small businesses. Your responses to the information requested will assist the Government in determining the appropriate acquisition method, including whether a set-aside is possible. The anticipated applicable NAICS code for this acquisition is 541380, Testing Laboratories and Services- other relevant NAICS codes will be considered based on responses received (such as conference centers, etc.) 1.0 BACKGROUND The IHS is an agency within the Department of Health & Human Services and is responsible for providing federal health services to American Indians and Alaska Natives. The Indian Health Service provides a comprehensive health service delivery system for approximately 1.9 million American Indians and Alaska Natives who belong to 567 federally recognized tribes, in 35 states. The Indian Health Service Headquarters is located in Rockville, MD and then divided into twelve (12) physical areas: Alaska, Albuquerque, Bemidji, Billings, California, Great Plains, Nashville, Navajo, Oklahoma, Phoenix, Portland, and Tucson. The Great Plains Area Office (GPAO) works in conjunction with 19 Indian Health Service Units and Tribal Managed Service Units to provide health care to approximately 130,000 Native American located in North Dakota, South Dakota, Nebraska, and Iowa. QNBMHCF falls under the GPAO and provides medical care to approximately 14,550 tribal members living on the Turtle Mountain Indian Reservation. The Service Unit was built in 1967 with renovation and clinic expansion completed in 1992, to provide an expanded level of outpatient health care services specifically designed to meet the needs of our population. Services include: 24 Hour Emergency Services, Laboratory, Radiology (CAT Scan & Mobile MRI) and 24-Hour Pharmacy Services, Optometry, Dental, Clinic, Emergency, Podiatry, Same Day Clinic, and Behavioral Health. 2.0 SCOPE Provide QNB with blood and blood products. These products will be used to provide direct patient care in our ER, OR, and OB wards. This firm-fixed-price Purchase Order will be for one base year and 4 option years. Vendor will ship out new Red Blood Cell (RBC) stock every two to three weeks. Old stock will be shipped back to the vendor when new stock arrives. Plasma and Platelets will be sent on an as needed basis. Packed red blood cells will be automatically delivered every two to three weeks. 3.0 TYPE OF ORDER This is a firm fixed price purchase order. 4.0 ANTICIPATED PERIOD OF PERFORMANCE Period of Performance: Base + 4 option years 5.0 PLACE OF PERFORMANCE Quentin N Burdick Memorial Health Care Facility 1300 Hospital Loop Belcourt, ND 58316 6.0 REPORT(S)/DELIVERABLES AND DELIVERY SCHEDULE Delivery Location: Quentin N. Burdick Memorial Health Care Facility Belcourt, ND 58316 7.0 PAYMENT IPP Invoice clause: HHSAR 352.232-71 Electronic Submission of Invoice Payment Requests (Feb 2022) (a) Definitions. As used in this clause- Payment request means a bill, voucher, invoice, or request for contract financing payment with associated supporting documentation. The payment request must comply with the requirements identified in FAR 32.905(b), "Content of Invoices" and the applicable Payment clause included in this contract. (b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests electronically using the Department of Treasury Invoice Processing Platform (IPP) or successor system. Information regarding IPP, including IPP Customer Support contact information, is available at www.ipp.gov or any successor site. (c) The Contractor may submit payment requests using other than IPP only when the Contracting Officer authorizes alternate procedures in writing in accordance with HHS procedures. (d) If alternate payment procedures are authorized, the Contractor shall include a copy of the Contracting Officer's written authorization with each payment request. (END OF CLAUSE) Unless otherwise agreed to by the contracting officer per HHSAR 352.232-71(c), the use of IPP shall take precedence over previously established invoicing procedures." In compliance with the Office of Management and Budget (OMB) M-15-19 memorandum Improving Government Efficiency and Saving Taxpayer Dollars Through Electronic Invoicing directing Federal agencies to adopt electronic invoicing as the primary means to disburse payment to vendors. Invoices submitted under any award resulting from this solicitation will be required to utilize the Invoice Processing Platform (IPP) in accordance with HHSAR 352.232-71, Electronic Submission and Processing of Payment Requests IPP is a secure, web-based electronic invoicing system provided by the U.S. Department of the Treasurys Bureau of the Fiscal Service, in partnership with the Federal Reserve Bank of St. Louis (FRSTL). If your organization is already registered to use IPP, you will not be required to re-register- however, we encourage you make sure your organization and designated IPP user accounts are valid and up to date. The IPP website address is: https://www.ipp.gov If you require assistance registering or IPP account access, please contact the IPP Helpdesk at (866) 973-3131 (M-F 8AM to 6PM ET), or IPPCustomerSupport@fiscal.treasury.gov 8.0 Capability Statement/Information: Interested parties are expected to review this notice to familiarize themselves with the requirements of this project. Failure to do so will be at your firm’s own risk. The following information shall be included in the capability statement: 1. A general overview of the respondents’ opinions about the difficulty and/or feasibility of the potential requirement, and any information regarding innovative ideas or concepts. 2. Information in sufficient detail about the respondent’s (a) current capability and capacity to perform the work; (b) prior completed events of similar nature/size; (c) organizational experience and management capability; and (d) examples of prior completed Government contracts and other related information. 3. The respondents’ UEI number, organization name, address, point of contact, and size and type of business (e.g., 8(a), HUBZone, etc.) Pursuant to the North American Industry Classification System (NAICS) code: 541380, Testing Laboratories and Services, or comparable NAICS 4. Any other information that may be helpful in developing or finalizing the requirements of the potential acquisition. 5. The capability statement shall not exceed 10 single-sided pages (including all attachments, resumes, charts, etc.) presented in single-space and using a 12-point font size minimum, in either Microsoft Word or Adobe Portable Document Format (PDF), with 8-1/2 by 11-inch paper size, and 1 inch top, bottom, left and right margins. 6. All proprietary information should be marked as such. Statements should also include an indication of current certified small business status; this indication should be clearly marked on the first page of your capability statement (preferably placed under the eligible small business concern’s name and address). Responses will be reviewed only by IHS personnel and will be held in a confidential manner. 9.0 Closing Statement Point of Contact: Jody Keplin, Purchasing Agent, at Jody.Keplin@ihs.gov Submission Instructions: Interested parties shall submit capability via email to Jody Keplin, at Jody.Keplin@ihs.gov . Must include Sources Sought Number IHS-SS-26-1524548 in the Subject line. The due date for receipt of statements is October 8, 2026 12:00 p.m. Central Time. All responses must be received by the specified due date and time in order to be considered. This notice is for information and planning purposes only and shall not be construed as a solicitation or as an obligation on the part of IHS. IHS does not intend to award a contract on the basis of responses nor otherwise pay for the preparation of any information submitted. As a result of this notice, IHS may issue a Request for Quote (RFQ). THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. However, should such a requirement materialize, no basis for claims against IHS shall arise as a result of a response to this notice or IHS’s use of such information as either part of our evaluation process or in developing specifications for any subsequent requirement. Disclaimer and Important Notes. This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response. The Government reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s qualifications to perform the work. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. After a review of the responses received, a pre-solicitation synopsis and solicitation may be published in SAM.gov. However, responses to this notice will not be considered adequate responses to a solicitation. Confidentiality. No proprietary, classified, confidential, or sensitive information should be included in your response.

Belcourt
Due Oct 8, 2026View bid