Skip to content
Constructeams
CanadaBuysCloses in 11 days

Steveston (Paramount) Utility Dike Crossings, Richmond, BC

Location
British Columbia, Canada
Responses due
Oct 19, 2026

Overview

Small Craft Harbours (SCH) requires the installation of underground High Density Polyethylene (HDPE) casings through an existing dike, at four (4) locations (Crossing A, B, C and D) in Steveston Paramount in preparation for future electrical and water underground installations. Summary of crossings are as follows: • Crossing A – 2 HDPE DR 17 450mm diameter for electrical and communication. • Crossing B – 1 HDPE DR 11 300mm diameter for waterline plus multiple tie ins to existing water pipe. • Crossing C – 2 HDPE DR 17 450mm diameter and 1 HDPE DR 11 300mm diameter for electrical, communication and waterline • Crossing D – 1 HDPE DR 11 300mm diameter for waterline. Crossing A and C require installation of electrical and communication pull box on both sides of the dike. Crossing B require re-routing water supply from the existing asbestos cement pipe to new HDPE DR 11 300mm watermain along Trites Road with multiple tie-ins to existing underground water line and into existing backflow preventor. Contractor shall provide all supervision, labour, materials, supplies, tools, equipment, transportation, quality control, health and safety practices, environmental protection, and all other necessary services for the proper and complete execution of the work. Work of this Contract is located at 12740 Trites Road, Richmond, BC, Canada Familiarization with site: Before submitting a bid, bidders can visit the site and its surroundings, at their own expense, to review and verify the form, nature, and extent of the work, materials needed for the completion of the work, the means of access to the site, severity, exposure, and uncertainty of weather, soil conditions, any accommodations they may require, and in general shall obtain all necessary information as to risks, contingencies, and other circumstances which may influence or affect their bid. No allowance shall be made subsequently in this connection on account or error or negligence to properly observe and determine the conditions that will apply. Timeline: All work including clean-up and demobilization must be completed by March 31, 2027.

Documents (1)

Create a free account to open documents and respond.

Source: CanadaBuysView in Constructeams

Similar open bids

CanadaBuysCloses in 7 days

Phase 1 EZ899-270648 Fuel Tank and Dispenser Replacement

Works associated with this project include, but are not limited to, the demolition of existing fuel tank(s) and the installation of new fuel tanks (including fuel dispenser and submersible turbine pumps) while preserving the existing Computrol Fuel Site Controller.

British Columbia
Due Oct 15, 2026View bid
CanadaBuysCloses in 7 days

Repairs to Rivers Inlet Public Port Facility Wharfheads

Transport Canada (TC) requires the supply of all labour, materials, equipment, and supervision necessary to replace three bearing piles at the Rivers Inlet Public Port Facility wharfhead. The work includes the removal and disposal of the existing piles and the supply and installation of replacement bearing piles. This work is required to maintain the structural integrity, operational reliability, and safe operation of the facility for ongoing public and commercial marine activities.

British Columbia
Due Oct 15, 2026View bid
CanadaBuysCloses in 8 days

Construction of PRTC Temporary Training Shelter

The Royal Canadian Mounted Police (RCMP) Pacific Regional Training Center (PRTC) requires construction of a temporary shelter to conduct scenario training for Operational Skill Maintenance (OSM), Immediate Action Rapid Deployment (IARD), high risk vehicle stops, and other training.

Surrey, British Columbia
Due Oct 16, 2026View bid
CanadaBuysCloses in 11 days

Phase 1 EZ899-270522 - Building 104 HVAC Revitalization

The scope of work is to replace existing, aged HVAC equipment. These existing systems include two (2) rooftop units and four (4) gas-fired furnaces c/w AC condensing units at Building 104, Principal entrance, at William Head Institution in Victoria, BC.

British Columbia
Due Oct 19, 2026View bid
CanadaBuysCloses in 12 days

Float Camp Rehabilitation, Gwaii Haanas National Marine Conservation Area

BIDS RECEIVED BY FAX AND EMAIL WILL BE ACCEPTED AS OFFICIAL. PARKS CANADA IS NOT CURRENTLY ACCEPTING BIDS VIA SAP ARIBA, YOU MUST SUBMIT YOUR BID VIA FAX OR EMAIL AS INDICATED IN THE SOLICITATION DOCUMENT. BIDS RECEIVED IN-PERSON OR BY COURIER WILL NOT BE ACCEPTED. The only acceptable email address for responses to the bid solicitation is soumissionsami-bidsrpc@pc.gc.ca. Bids submitted by email directly to the Contracting Authority or to any email address other than soumissionsami-bidsrpc@pc.gc.ca will not be accepted. The only acceptable facsimile for responses to bid solicitations is 1-855-983-1808. The maximum email file size that Parks Canada is capable of receiving is 15 megabytes. The Bidder is responsible for any failure attributable to the transmission or receipt of the emailed bid due to file size. The Bidder should be cognisant of the size of the email as a whole, and not only the attachments. Please take into consideration that some attachments, when sent, may be resized during the email transfer. If the email size is too large, the Bidder should send the bid in multiple emails properly labeled with the solicitation number, project name, and indicate how many emails are included (ex. 1 of 2). Emails with links to bid documents will not be accepted. Bid documents must be sent as email attachments. REQUIREMENT Parks Canada Agency (PCA) requires the services of a Contractor for repair and improvements to the floats, connections mooring and interior systems of the Gwaii Haanas Float Camp. TWO-SUBMISSION BID This Bid shall be submitted following a “two-submission” procedure. Refer to SI03 of the Special Instructions to Bidders. CONTRACTOR SELECTION AND INDIGENOUS PARTICIPATION PLAN The Contractor should ensure provision of specific and agreed upon benefits for Indigenous People and Indigenous Businesses in the Area of the Contract. This Invitation to Tender contains bid criteria in order to provide socioeconomic benefits to Indigenous communities within the area covered by the contract. PERIOD OF CONTRACT / DELIVERY DATE Contractor must perform and complete the Work no later than October 31, 2027. ENQUIRIES All enquiries of a technical and contractual nature are to be submitted to the Contracting Authority. Enquiries regarding this solicitation must be submitted in writing and should be received no later than five (5) business days prior to the date set for solicitation closing to allow sufficient time to provide a response. Enquiries received after that time may result in an answer NOT being provided. INFORMATION National Parks Regulations require that all work is to be performed in accordance with the ordinances, laws, rules and regulations set out in the National Park Act. Bidders that consider themselves qualified to provide this Work and intend to submit bids on this project should obtain documents from the Government Electronic Tendering Service through the Government of Canada tendering service at http://canadabuys.canada.ca/en/tender-opportunities. Addenda, when issued, will be available from the Government of Canada tendering service. Bidders that elect to base their bids on documents obtained from other sources do so at their own risk. Late submissions will not be considered. The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada. Parks Canada has made every effort to provide equivalent documents in both official languages, however, if you find any discrepancies between the English and French documents, please notify the contract officer listed in this opportunity as soon as possible so that we can rectify the situation.

British Columbia
Due Oct 20, 2026View bid
CanadaBuysCloses in 12 days

Cell Window Glazing

Cell Window Glazing This requirement is for: The Correctional Service of Canada, Kent Institution, Pacific Region. Trade agreement: Canadian Free Trade Agreement (CFTA). Policy on Reciprocal Procurement: Barring any other conditions or international sanctions, Canadian Suppliers, Suppliers of an Applicable Trading Partner and Suppliers of a Non-Trading Partner, are eligible for this solicitation. Competitive Procurement Strategy: lowest priced compliant bid. Set-aside under the Procurement Strategy for Indigenous Business: This procurement is not subject to any set-asides for Indigenous Suppliers. Comprehensive Land Claim Agreement: This procurement is not subject to a Comprehensive Land Claims Agreement. Security Requirements: This contract does not include security requirements. Nature of Requirements: The following is a summary of the statement of work for this requirement. The Correctional Service Canada has a requirement to replace the existing cell window glazing and installation of the polycarbonate security screens to prevent inmates from manipulating window assemblies and receiving contraband delivered by drone. Objectives: To improve the integrity and security of cell windows by installing enhanced glazing and security measures that prevent inmates from damaging, manipulating, removing, or otherwise compromising window assemblies to receive contraband. Deliverables: The Contractor shall: • Supply and install new security glazing in 168 windows located within POD 1 and POD 2, for a total of 504 glazing panels. • Supply and install one polycarbonate security screen on each of the 168 windows in accordance with the construction drawings. • Supply and install all required security screws, fasteners, and accessories identified in the construction drawings and specifications. • Apply security caulking to all newly installed glazing assemblies. • Apply security caulking to the 12 existing windows located in L-Range, POD 1. • Ensure all work is completed in accordance with the construction drawings, specifications, manufacturer’s instructions, and institutional security requirements. Any conditions for participation of suppliers not specified in solicitation documentation: none. Estimated quantity of commodity: see solicitation document statement of work and basis of payment. Duration of Contract and Time Frame for Delivery: Construction Time: The Contractor must perform and complete the Work within forty-four (44) weeks from the date of notification of acceptance of the offer. File Number: 21807-26-0068 Contracting Authority: Carlie Skotynski Telephone number: 604-756-4761 Facsimile number: 604-870-2444 E-mail: 801BidSubmissions@CSC-SCC.GC.CA NOTE TO BIDDERS: Bidders can obtain the complete statement of work and evaluation criteria by downloading the solicitation document and associated documents from the Canada buys / tender opportunities website. The Crown reserves the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada (English or French). After contract award, bidders may request a debriefing on the results of the bid solicitation process. Bidders should make the request to the Contracting Authority within fifteen (15) working days of receipt of the results of the bid solicitation process. The debriefing may be in writing, by telephone or in person. Procurement Assistance Canada (PAC) offers seminars to businesses interested in learning how to sell goods and services to the Government of Canada. The seminars are FREE. Topics include: ? Understand the federal procurement process; ? Learn about searching for opportunities; ? Find out how to bid on opportunities; ? Discover how to prepare to sell to the government. The full schedule of seminars can be found on the Procurement Assistance Canada website, under find an event (Procurement Assistance Canada: Find an event - Canada.ca).

Abbotsford, British Columbia
Due Oct 20, 2026View bid