TxDOTCloses in 27 days
SH 30 AT NAVASOTA RIVER - BR
- Location
- Texas, United States
- Responses due
- Nov 4, 2026
- Budget
- $10,117,449 (est.)
Overview
Replace Bridge and Approaches
Source: TxDOTView in Constructeams
Similar open bids
SAM.govCloses tomorrow
Y1DZ--519-371 Construct New CLC Phase III Minor Construction - Big Spring, TX VAMC
Big Spring CLC Phase III Minor Construction
Big Spring
Due Oct 9, 2026View bid
SAM.govCloses today
KB Duct List
Salient Characteristics SpecificationTitle: Galvanized Steel Quick-Disconnect Ductwork and Components for Air-Conditioning SystemSubject: Supply of modular galvanized steel quick-disconnect ductwork, fittings, dampers, and support hangers.Basis of Design: The part numbers below are for reference and configuration cross-reference. Products offered may be from another acceptable manufacturer, provided they meet or exceed all salient characteristics and are fully compatible with the complete ductwork system.1. Scope and PurposeThis requirement is for the supply and delivery only of galvanized steel, modular quick-disconnect ductwork and associated fittings for an air-conditioning system. The supplied components shall form a mutually compatible duct system consisting of straight duct sections, reducers, wye connectors, elbows, airflow dampers, and saddle hangers.Installation, field fabrication, field welding, and connection to existing equipment are not included unless specifically added elsewhere in the solicitation.2. General Salient Characteristics. All offered items shall meet the following minimum requirements: Material: Items 1 through 26 shall be galvanized steel only. No stainless steel, aluminum, plastic, or uncoated carbon-steel substitutes shall be accepted.System Compatibility: All duct, fittings, dampers, and hangers shall be compatible with the specified quick-disconnect duct system. Components of the same nominal duct diameter shall connect directly without adapters, field welding, rivets, sheet-metal screws, or permanent field modification.Quick-Disconnect Connection: Straight duct sections, reducers, wye connectors, elbows, tees, and dampers shall use a quick-disconnect connection configuration compatible with the remaining supplied components. Connection features shall permit assembly and disassembly of the duct system without damage to the duct or fittings.Nominal Dimensions: Duct diameters and fitting dimensions listed in the schedule are nominal inside diameters unless the manufacturer???s standard quick-disconnect system identifies dimensions differently. Reducers shall transition between the listed inlet and outlet diameters. Fittings shall be sized to directly mate with the corresponding duct diameter.Gauge Requirements: Straight duct sections and dampers shall be 20-gauge galvanized steel where identified in the schedule. Reducers, elbows, wye connectors, tees, and 90-degree fittings shall be 18-gauge galvanized steel where identified in the schedule. Saddle hangers shall be 14-gauge galvanized steel where identified in the schedule.Quality and Condition: Products shall be new, free of corrosion, dents, sharp edges, cracks, deformation, damaged coating, or manufacturing defects that would prevent proper assembly or service. Duct sections shall be round, and fittings shall retain their intended shape to allow proper connection. Components shall be packaged and shipped to prevent damage or distortion in transit.Equal Products: An offered equal product shall meet every listed dimensional material, gauge, connection, configuration, and quantity requirement. The offeror shall provide manufacturer specifications or product literature sufficient to verify compliance when requested.3. Required Items ScheduleItem. Required Item / Salient Characteristics. Minimum Material / Gauge. Qty. Reference No.*1. Quick-disconnect straight duct, nominal 24-inch diameter. Galvanized steel, 20 ga 17 EA 10024.2. Quick-disconnect reducer, 24-inch inlet to 22-inch outlet Galvanized steel, 18 ga 5 EA 16024.3. Quick-disconnect straight duct, nominal 22-inch diameter Galvanized steel, 20 ga 20 EA 10022.4. Quick-disconnect reducer, 22-inch inlet to 20-inch outlet Galvanized steel, 18 ga 5 EA 16022.5. Quick-disconnect straight duct, nominal 20-inch diameter Galvanized steel, 20 ga 17 EA 10020.6. Quick-disconnect reducer, 20-inch inlet to 18-inch outlet Galvanized steel, 18 ga 5 EA 16020.7. Quick-disconnect 45-degree wye connector, nominal 24-inch duct size Galvanized steel, 18 ga 1 EA 14224.45.8. Quick-disconnect 45-degree elbow, nominal 22-inch duct size Galvanized steel, 18 ga 1 EA 12022.45.9. Quick-disconnect manual butterfly valve airflow damper, nominal 22-inch duct size Galvanized steel, 20 ga 1 EA 19422.10. Quick-disconnect straight duct, nominal 18-inch diameter Galvanized steel, 20 ga 28 EA 10018.11. Quick-disconnect tee, 18-inch ?? 18-inch ?? 18-inch Galvanized steel, 18 ga 1 EA 14318.12. Quick-disconnect straight duct, nominal 16-inch diameter Galvanized steel, 20 ga 19 EA 10016.13. Quick-disconnect reducer, 18-inch inlet to 16-inch outlet Galvanized steel, 18 ga 3 EA 16018.14. Quick-disconnect 45-degree elbow, nominal 16-inch duct size Galvanized steel, 18 ga 2 EA 12016.45.15. Quick-disconnect manual butterfly valve airflow damper, nominal 16-inch duct size Galvanized steel, 20 ga 2 EA 19416.16. Quick-disconnect 90-degree elbow, nominal 20-inch duct size Galvanized steel, 18 ga 2 EA 12020.90.17. Saddle hanger sized for nominal 24-inch duct Galvanized steel, 14 ga 14 EA 17024.18. Saddle hanger sized for nominal 22-inch duct Galvanized steel, 14 ga 14 EA 17022.19. Saddle hanger sized for nominal 20-inch duct Galvanized steel, 14 ga 14 EA 17020.22. 16-inch galvanized clamp with white nitrile gasket, 27 EA 13016-GA-N.23. 18-inch galvanized clamp with white nitrile gasket, 30 EA 13018-GA-N.24. 20-inch galvanized clamp with white nitrile gasket, 25 EA 13020-GA-N.25. 22-inch galvanized clamp with white nitrile gasket, 28 EA 13022-GA-N.26. 24-inch galvanized clamp with white nitrile gasket, 24 EA 13024-GA-N.*Reference numbers are not brand-name requirements and are included only to identify the intended configuration and compatibility standard. Galvanized Ducting shall be Standard 5-feet Lengths and 11-inch Galvanized Standard Adjustable Sleeves where applicable.4. Component-Specific Requirements shall be galvanized steel:4.1 Saddle Hangers (items 17-21) used for handing duct systems and reducing sway Shall be nominal 24-inch diameter 14 ga 14 EA 17024, 22-inch diameter 14 ga 14 EA 17022, 20-inch diameter 14 ga 14 EA 17020, 18-inch diameter 14 ga 18 EA 17018, or 16-inch diameter 14 ga 14 EA 17016, as identified in the item schedule. Shall use the required quick-disconnect end configuration.4.2 Reducers Shall be galvanized steel, 18 gauge. Shall provide the listed nominal transitions: 24 x 22 inches, 22 x 20 inches, 20 x 18 inches, and 18 x 16 inches. Shall have quick-disconnect ends compatible with the adjoining duct sections.4.3 Elbows, Wye Connector, and Tee, shall be galvanized steel, 18 gauge. Shall have the listed nominal diameter and directional configuration. The wye connector and applicable elbows shall be 45 degrees as listed. The 20-inch elbow shall be 90 degrees. The tee shall be 18 inches ?? 18 inches ?? 18 inches. All ends shall be compatible with the required quick-disconnect duct system.4.4 Airflow Dampers Shall be galvanized steel, 20 gauge. Shall be sized for 22-inch or 16-inch nominal quick-disconnect duct, as identified in the item schedule. Shall be suitable for controlling airflow within the compatible duct system. 4.5 Saddle Hangers Shall be galvanized steel, 14 gauge. Shall be contoured and sized to support the corresponding nominal duct diameter without crushing, deforming, or damaging the duct. Shall be suitable for attachment to the Government???s selected overhead support method. 5. Inspection and Acceptance the Government may inspect delivered items for: Correct item type, nominal size, gauge, and quantity; Galvanized-steel construction; Compatibility of quick-disconnect connections among offered components; Required elbow, wye, tee, reducer, damper, and hanger configurations; Damage, deformation, corrosion, or deficient protective packaging; and Manufacturer literature or other documentation supporting compliance with the salient characteristics. Items that do not meet the stated requirements may be rejected.
United States
Due Oct 8, 2026View bid
SAM.govCloses today
Sources sought for Blood and Blood Products for QNBMHF in Belcourt ND 58316.
Sources Sought: Provide blood and blood products to the Quentin N. Burdick Memorial Healthcare Facility (QNB) in Belcourt North Dakota. Sources Sought Notice Number: IHS-SS-26-1524548 This Sources Sought Notice is for informational and planning purposes only and shall not be construed as a solicitation, an obligation or commitment by the Indian Health Service. This notice is intended strictly for market research to determine the availability of small businesses. Your responses to the information requested will assist the Government in determining the appropriate acquisition method, including whether a set-aside is possible. The anticipated applicable NAICS code for this acquisition is 541380, Testing Laboratories and Services- other relevant NAICS codes will be considered based on responses received (such as conference centers, etc.) 1.0 BACKGROUND The IHS is an agency within the Department of Health & Human Services and is responsible for providing federal health services to American Indians and Alaska Natives. The Indian Health Service provides a comprehensive health service delivery system for approximately 1.9 million American Indians and Alaska Natives who belong to 567 federally recognized tribes, in 35 states. The Indian Health Service Headquarters is located in Rockville, MD and then divided into twelve (12) physical areas: Alaska, Albuquerque, Bemidji, Billings, California, Great Plains, Nashville, Navajo, Oklahoma, Phoenix, Portland, and Tucson. The Great Plains Area Office (GPAO) works in conjunction with 19 Indian Health Service Units and Tribal Managed Service Units to provide health care to approximately 130,000 Native American located in North Dakota, South Dakota, Nebraska, and Iowa. QNBMHCF falls under the GPAO and provides medical care to approximately 14,550 tribal members living on the Turtle Mountain Indian Reservation. The Service Unit was built in 1967 with renovation and clinic expansion completed in 1992, to provide an expanded level of outpatient health care services specifically designed to meet the needs of our population. Services include: 24 Hour Emergency Services, Laboratory, Radiology (CAT Scan & Mobile MRI) and 24-Hour Pharmacy Services, Optometry, Dental, Clinic, Emergency, Podiatry, Same Day Clinic, and Behavioral Health. 2.0 SCOPE Provide QNB with blood and blood products. These products will be used to provide direct patient care in our ER, OR, and OB wards. This firm-fixed-price Purchase Order will be for one base year and 4 option years. Vendor will ship out new Red Blood Cell (RBC) stock every two to three weeks. Old stock will be shipped back to the vendor when new stock arrives. Plasma and Platelets will be sent on an as needed basis. Packed red blood cells will be automatically delivered every two to three weeks. 3.0 TYPE OF ORDER This is a firm fixed price purchase order. 4.0 ANTICIPATED PERIOD OF PERFORMANCE Period of Performance: Base + 4 option years 5.0 PLACE OF PERFORMANCE Quentin N Burdick Memorial Health Care Facility 1300 Hospital Loop Belcourt, ND 58316 6.0 REPORT(S)/DELIVERABLES AND DELIVERY SCHEDULE Delivery Location: Quentin N. Burdick Memorial Health Care Facility Belcourt, ND 58316 7.0 PAYMENT IPP Invoice clause: HHSAR 352.232-71 Electronic Submission of Invoice Payment Requests (Feb 2022) (a) Definitions. As used in this clause- Payment request means a bill, voucher, invoice, or request for contract financing payment with associated supporting documentation. The payment request must comply with the requirements identified in FAR 32.905(b), "Content of Invoices" and the applicable Payment clause included in this contract. (b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests electronically using the Department of Treasury Invoice Processing Platform (IPP) or successor system. Information regarding IPP, including IPP Customer Support contact information, is available at www.ipp.gov or any successor site. (c) The Contractor may submit payment requests using other than IPP only when the Contracting Officer authorizes alternate procedures in writing in accordance with HHS procedures. (d) If alternate payment procedures are authorized, the Contractor shall include a copy of the Contracting Officer's written authorization with each payment request. (END OF CLAUSE) Unless otherwise agreed to by the contracting officer per HHSAR 352.232-71(c), the use of IPP shall take precedence over previously established invoicing procedures." In compliance with the Office of Management and Budget (OMB) M-15-19 memorandum Improving Government Efficiency and Saving Taxpayer Dollars Through Electronic Invoicing directing Federal agencies to adopt electronic invoicing as the primary means to disburse payment to vendors. Invoices submitted under any award resulting from this solicitation will be required to utilize the Invoice Processing Platform (IPP) in accordance with HHSAR 352.232-71, Electronic Submission and Processing of Payment Requests IPP is a secure, web-based electronic invoicing system provided by the U.S. Department of the Treasurys Bureau of the Fiscal Service, in partnership with the Federal Reserve Bank of St. Louis (FRSTL). If your organization is already registered to use IPP, you will not be required to re-register- however, we encourage you make sure your organization and designated IPP user accounts are valid and up to date. The IPP website address is: https://www.ipp.gov If you require assistance registering or IPP account access, please contact the IPP Helpdesk at (866) 973-3131 (M-F 8AM to 6PM ET), or IPPCustomerSupport@fiscal.treasury.gov 8.0 Capability Statement/Information: Interested parties are expected to review this notice to familiarize themselves with the requirements of this project. Failure to do so will be at your firm’s own risk. The following information shall be included in the capability statement: 1. A general overview of the respondents’ opinions about the difficulty and/or feasibility of the potential requirement, and any information regarding innovative ideas or concepts. 2. Information in sufficient detail about the respondent’s (a) current capability and capacity to perform the work; (b) prior completed events of similar nature/size; (c) organizational experience and management capability; and (d) examples of prior completed Government contracts and other related information. 3. The respondents’ UEI number, organization name, address, point of contact, and size and type of business (e.g., 8(a), HUBZone, etc.) Pursuant to the North American Industry Classification System (NAICS) code: 541380, Testing Laboratories and Services, or comparable NAICS 4. Any other information that may be helpful in developing or finalizing the requirements of the potential acquisition. 5. The capability statement shall not exceed 10 single-sided pages (including all attachments, resumes, charts, etc.) presented in single-space and using a 12-point font size minimum, in either Microsoft Word or Adobe Portable Document Format (PDF), with 8-1/2 by 11-inch paper size, and 1 inch top, bottom, left and right margins. 6. All proprietary information should be marked as such. Statements should also include an indication of current certified small business status; this indication should be clearly marked on the first page of your capability statement (preferably placed under the eligible small business concern’s name and address). Responses will be reviewed only by IHS personnel and will be held in a confidential manner. 9.0 Closing Statement Point of Contact: Jody Keplin, Purchasing Agent, at Jody.Keplin@ihs.gov Submission Instructions: Interested parties shall submit capability via email to Jody Keplin, at Jody.Keplin@ihs.gov . Must include Sources Sought Number IHS-SS-26-1524548 in the Subject line. The due date for receipt of statements is October 8, 2026 12:00 p.m. Central Time. All responses must be received by the specified due date and time in order to be considered. This notice is for information and planning purposes only and shall not be construed as a solicitation or as an obligation on the part of IHS. IHS does not intend to award a contract on the basis of responses nor otherwise pay for the preparation of any information submitted. As a result of this notice, IHS may issue a Request for Quote (RFQ). THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. However, should such a requirement materialize, no basis for claims against IHS shall arise as a result of a response to this notice or IHS’s use of such information as either part of our evaluation process or in developing specifications for any subsequent requirement. Disclaimer and Important Notes. This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response. The Government reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s qualifications to perform the work. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. After a review of the responses received, a pre-solicitation synopsis and solicitation may be published in SAM.gov. However, responses to this notice will not be considered adequate responses to a solicitation. Confidentiality. No proprietary, classified, confidential, or sensitive information should be included in your response.
Belcourt
Due Oct 8, 2026View bid
SAM.govCloses today
ID-CAMAS NWR- Fuel Tanks Wiring
ID-CAMAS NWR- Fuel Tanks Wiring
United States
Due Oct 8, 2026View bid
SAM.govCloses today
15BCTS25Q00000015 - SU/MH/SOT in Rapid City, SD
Document Type: Combined Synopsis/Solicitation Solicitation Number: 15BCTS25Q00000015 Posted Date: September 8, 2026 Original Response Date: October 8, 2026 Current Response Date: October 8, 2026 Product or Service Code: G004 Set Aside: Total Small Business Concerns NAICS Code: 621420 Contracting Office Address Federal Bureau of Prisons Community Treatment Services Contracting 320 First Street NW, 2nd Floor Washington, DC 20534 rbryant1@bop.gov (email) Description This is a combined synopsis/solicitation for commercial products or services prepared in accordance with Federal Acquisition Regulation (FAR) Part 12. This announcement constitutes the only solicitation. Quotes are being requested, and a separate written solicitation will not be issued. Solicitation number 15BCTS25Q00000015 is issued as a request for quotation (RFQ). The Federal Bureau of Prisons, CTS Contracting Office, Washington, D.C. is seeking quotes from sources that have the ability to provide community-based outpatient substance use disorder, sex offender treatment and mental health treatment services for male and female Adults in Custody (AICs) residing at the local Residential Re-entry Center (RRC) and on home confinement in Rapid City, SD. Simplified acquisition procedures are being used and anticipated award date is December 1, 2026. This acquisition is set aside for small business concerns. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. The associated North American Industrial Classification System (NAICS) code for this procurement is 621420, with a small business size standard of $19,000,000. The product or service code is G004. The government will award an indefinite-delivery contract resulting from this combined synopsis/solicitation to the responsible offeror whose offer, conforming to the synopsis/solicitation, will be most advantageous to the government (as determined by the solicitation evaluation criteria). Performance periods under this contract will be for a one-year base period estimated to begin on December 1, 2026, with four (4) one-year option periods (i.e., Base Year; Option Year One, Option Year Two, Option Year Three, and Option Year Four). Base Year Substance Use Disorder: 2001 Substance Use Disorder Treatment Planning & Follow-up - 10 Units Guaranteed Minimum; 100 Units Estimated Maximum 2005 Substance Use Disorder Intake Screening - 5 Units Guaranteed Minimum; 75 Units Estimated Maximum 2010 Substance Use Disorder Individual Counseling - 180 Units Guaranteed Minimum; 2400 Units Estimated Maximum 2011 Substance Use Disorder Intake Assessments & Report - 10 Units Guaranteed Minimum; 100 Units Estimated Maximum 2012 Co-occurring Intake Assessment & Report - 1 Units Guaranteed Minimum; 45 Units Estimated Maximum 2020 Substance Use Disorder Group Counseling - 120 Units Guaranteed Minimum; 2400 Units Estimated Maximum 2030 Substance Use Disorder Relationship and Parenting Counseling - 2 Units Guaranteed Minimum; 36 Units Estimated Maximum Mental Health: 5001 Mental Health Treatment Planning & Follow-up – 10 Units Guaranteed Minimum; 125 Units Estimated Maximum 5005 Mental Health Intake Screening – 5 Units Guaranteed Minimum; 75 Units Estimated Maximum 5011 Mental Health Intake Assessment & Report – 10 Units Guaranteed Minimum; 125 Units Estimated Maximum 5030 Psychiatric Evaluation & Report – 10 Units Guaranteed Minimum; 150 Units Estimated Maximum 6000 Crisis Intervention Evaluation & Report – 1 Unit Guaranteed Minimum; 10 Units Estimated Maximum 6010 Mental Health Individual Counseling – 180 Units Guaranteed Minimum; 2000 Units Estimated Maximum 6031 Mental Health Relationship and Parenting Counseling – 2 Units Guaranteed Minimum; 36 Units Estimated Maximum 6051 Medication Monitoring & Report – 10 Units Guaranteed Minimum; 250 Units Estimated Maximum Sex Offender Treatment (SOT): 5012 Sex Offender Intake Assessment & Report - 1 Unit Guaranteed Minimum; 30 Units Estimated Maximum 6001 Sex Offender Treatment Disorder Treatment Planning & Follow-up – 1 Unit Guaranteed Minimum; 30 Units Estimated Maximum 6005 Sex Offender Intake Screening - 1 Unit Guaranteed Minimum; 25 Units Estimated Maximum 6012 Sex Offender Individual Counseling - 2 Units Guaranteed Minimum; 480 Units Estimated Maximum 6022 Sex Offender Group Counseling – 4 Units Guaranteed Minimum; 720 Units Estimated Maximum Option Year One Substance Use Disorder: 2001 Substance Use Disorder Treatment Planning & Follow-up - 10 Units Guaranteed Minimum; 100 Units Estimated Maximum 2005 Substance Use Disorder Intake Screening - 5 Units Guaranteed Minimum; 75 Units Estimated Maximum 2010 Substance Use Disorder Individual Counseling - 180 Units Guaranteed Minimum; 2400 Units Estimated Maximum 2011 Substance Use Disorder Intake Assessments & Report - 10 Units Guaranteed Minimum; 100 Units Estimated Maximum 2012 Co-occurring Intake Assessment & Report - 1 Units Guaranteed Minimum; 45 Units Estimated Maximum 2020 Substance Use Disorder Group Counseling - 120 Units Guaranteed Minimum; 2400 Units Estimated Maximum 2030 Substance Use Disorder Relationship and Parenting Counseling - 2 Units Guaranteed Minimum; 36 Units Estimated Maximum Mental Health: 5001 Mental Health Treatment Planning & Follow-up – 10 Units Guaranteed Minimum; 125 Units Estimated Maximum 5005 Mental Health Intake Screening – 5 Units Guaranteed Minimum; 75 Units Estimated Maximum 5011 Mental Health Intake Assessment & Report – 10 Units Guaranteed Minimum; 125 Units Estimated Maximum 5030 Psychiatric Evaluation & Report – 10 Units Guaranteed Minimum; 150 Units Estimated Maximum 6000 Crisis Intervention Evaluation & Report – 1 Unit Guaranteed Minimum; 10 Units Estimated Maximum 6010 Mental Health Individual Counseling – 180 Units Guaranteed Minimum; 2000 Units Estimated Maximum 6031 Mental Health Relationship and Parenting Counseling – 2 Units Guaranteed Minimum; 36 Units Estimated Maximum 6051 Medication Monitoring & Report – 10 Units Guaranteed Minimum; 250 Units Estimated Maximum Sex Offender Treatment (SOT): 5012 Sex Offender Intake Assessment & Report - 1 Unit Guaranteed Minimum; 30 Units Estimated Maximum 6001 Sex Offender Treatment Disorder Treatment Planning & Follow-up – 1 Unit Guaranteed Minimum; 30 Units Estimated Maximum 6005 Sex Offender Intake Screening - 1 Unit Guaranteed Minimum; 25 Units Estimated Maximum 6012 Sex Offender Individual Counseling - 2 Units Guaranteed Minimum; 480 Units Estimated Maximum 6022 Sex Offender Group Counseling – 4 Units Guaranteed Minimum; 720 Units Estimated Maximum Option Year Two Substance Use Disorder: 2001 Substance Use Disorder Treatment Planning & Follow-up - 10 Units Guaranteed Minimum; 100 Units Estimated Maximum 2005 Substance Use Disorder Intake Screening - 5 Units Guaranteed Minimum; 75 Units Estimated Maximum 2010 Substance Use Disorder Individual Counseling - 180 Units Guaranteed Minimum; 2400 Units Estimated Maximum 2011 Substance Use Disorder Intake Assessments & Report - 10 Units Guaranteed Minimum; 100 Units Estimated Maximum 2012 Co-occurring Intake Assessment & Report - 1 Units Guaranteed Minimum; 45 Units Estimated Maximum 2020 Substance Use Disorder Group Counseling - 120 Units Guaranteed Minimum; 2400 Units Estimated Maximum 2030 Substance Use Disorder Relationship and Parenting Counseling - 2 Units Guaranteed Minimum; 36 Units Estimated Maximum Mental Health: 5001 Mental Health Treatment Planning & Follow-up – 10 Units Guaranteed Minimum; 125 Units Estimated Maximum 5005 Mental Health Intake Screening – 5 Units Guaranteed Minimum; 75 Units Estimated Maximum 5011 Mental Health Intake Assessment & Report – 10 Units Guaranteed Minimum; 125 Units Estimated Maximum 5030 Psychiatric Evaluation & Report – 10 Units Guaranteed Minimum; 150 Units Estimated Maximum 6000 Crisis Intervention Evaluation & Report – 1 Unit Guaranteed Minimum; 10 Units Estimated Maximum 6010 Mental Health Individual Counseling – 180 Units Guaranteed Minimum; 2000 Units Estimated Maximum 6031 Mental Health Relationship and Parenting Counseling – 2 Units Guaranteed Minimum; 36 Units Estimated Maximum 6051 Medication Monitoring & Report – 10 Units Guaranteed Minimum; 250 Units Estimated Maximum Sex Offender Treatment (SOT): 5012 Sex Offender Intake Assessment & Report - 1 Unit Guaranteed Minimum; 30 Units Estimated Maximum 6001 Sex Offender Treatment Disorder Treatment Planning & Follow-up – 1 Unit Guaranteed Minimum; 30 Units Estimated Maximum 6005 Sex Offender Intake Screening - 1 Unit Guaranteed Minimum; 25 Units Estimated Maximum 6012 Sex Offender Individual Counseling - 2 Units Guaranteed Minimum; 480 Units Estimated Maximum 6022 Sex Offender Group Counseling – 4 Units Guaranteed Minimum; 720 Units Estimated Maximum Option Year Three Substance Use Disorder: 2001 Substance Use Disorder Treatment Planning & Follow-up - 10 Units Guaranteed Minimum; 100 Units Estimated Maximum 2005 Substance Use Disorder Intake Screening - 5 Units Guaranteed Minimum; 75 Units Estimated Maximum 2010 Substance Use Disorder Individual Counseling - 180 Units Guaranteed Minimum; 2400 Units Estimated Maximum 2011 Substance Use Disorder Intake Assessments & Report - 10 Units Guaranteed Minimum; 100 Units Estimated Maximum 2012 Co-occurring Intake Assessment & Report - 1 Units Guaranteed Minimum; 45 Units Estimated Maximum 2020 Substance Use Disorder Group Counseling - 120 Units Guaranteed Minimum; 2400 Units Estimated Maximum 2030 Substance Use Disorder Relationship and Parenting Counseling - 2 Units Guaranteed Minimum; 36 Units Estimated Maximum Mental Health: 5001 Mental Health Treatment Planning & Follow-up – 10 Units Guaranteed Minimum; 125 Units Estimated Maximum 5005 Mental Health Intake Screening – 5 Units Guaranteed Minimum; 75 Units Estimated Maximum 5011 Mental Health Intake Assessment & Report – 10 Units Guaranteed Minimum; 125 Units Estimated Maximum 5030 Psychiatric Evaluation & Report – 10 Units Guaranteed Minimum; 150 Units Estimated Maximum 6000 Crisis Intervention Evaluation & Report – 1 Unit Guaranteed Minimum; 10 Units Estimated Maximum 6010 Mental Health Individual Counseling – 180 Units Guaranteed Minimum; 2000 Units Estimated Maximum 6031 Mental Health Relationship and Parenting Counseling – 2 Units Guaranteed Minimum; 36 Units Estimated Maximum 6051 Medication Monitoring & Report – 10 Units Guaranteed Minimum; 250 Units Estimated Maximum Sex Offender Treatment (SOT): 5012 Sex Offender Intake Assessment & Report - 1 Unit Guaranteed Minimum; 30 Units Estimated Maximum 6001 Sex Offender Treatment Disorder Treatment Planning & Follow-up – 1 Unit Guaranteed Minimum; 30 Units Estimated Maximum 6005 Sex Offender Intake Screening - 1 Unit Guaranteed Minimum; 25 Units Estimated Maximum 6012 Sex Offender Individual Counseling - 2 Units Guaranteed Minimum; 480 Units Estimated Maximum 6022 Sex Offender Group Counseling – 4 Units Guaranteed Minimum; 720 Units Estimated Maximum Option Year Four Substance Use Disorder: 2001 Substance Use Disorder Treatment Planning & Follow-up - 10 Units Guaranteed Minimum; 100 Units Estimated Maximum 2005 Substance Use Disorder Intake Screening - 5 Units Guaranteed Minimum; 75 Units Estimated Maximum 2010 Substance Use Disorder Individual Counseling - 180 Units Guaranteed Minimum; 2400 Units Estimated Maximum 2011 Substance Use Disorder Intake Assessments & Report - 10 Units Guaranteed Minimum; 100 Units Estimated Maximum 2012 Co-occurring Intake Assessment & Report - 1 Units Guaranteed Minimum; 45 Units Estimated Maximum 2020 Substance Use Disorder Group Counseling - 120 Units Guaranteed Minimum; 2400 Units Estimated Maximum 2030 Substance Use Disorder Relationship and Parenting Counseling - 2 Units Guaranteed Minimum; 36 Units Estimated Maximum Mental Health: 5001 Mental Health Treatment Planning & Follow-up – 10 Units Guaranteed Minimum; 125 Units Estimated Maximum 5005 Mental Health Intake Screening – 5 Units Guaranteed Minimum; 75 Units Estimated Maximum 5011 Mental Health Intake Assessment & Report – 10 Units Guaranteed Minimum; 125 Units Estimated Maximum 5030 Psychiatric Evaluation & Report – 10 Units Guaranteed Minimum; 150 Units Estimated Maximum 6000 Crisis Intervention Evaluation & Report – 1 Unit Guaranteed Minimum; 10 Units Estimated Maximum 6010 Mental Health Individual Counseling – 180 Units Guaranteed Minimum; 2000 Units Estimated Maximum 6031 Mental Health Relationship and Parenting Counseling – 2 Units Guaranteed Minimum; 36 Units Estimated Maximum 6051 Medication Monitoring & Report – 10 Units Guaranteed Minimum; 250 Units Estimated Maximum Sex Offender Treatment (SOT): 5012 Sex Offender Intake Assessment & Report - 1 Unit Guaranteed Minimum; 30 Units Estimated Maximum 6001 Sex Offender Treatment Disorder Treatment Planning & Follow-up – 1 Unit Guaranteed Minimum; 30 Units Estimated Maximum 6005 Sex Offender Intake Screening - 1 Unit Guaranteed Minimum; 25 Units Estimated Maximum 6012 Sex Offender Individual Counseling - 2 Units Guaranteed Minimum; 480 Units Estimated Maximum 6022 Sex Offender Group Counseling – 4 Units Guaranteed Minimum; 720 Units Estimated Maximum Potential Six-Month Extension Substance Use Disorder: 2001 Substance Use Disorder Treatment Planning & Follow-up - 5 Units Guaranteed Minimum; 50 Units Estimated Maximum 2005 Substance Use Disorder Intake Screening - 3 Units Guaranteed Minimum; 38 Units Estimated Maximum 2010 Substance Use Disorder Individual Counseling - 90 Units Guaranteed Minimum; 1200 Units Estimated Maximum 2011 Substance Use Disorder Intake Assessments & Report - 5 Units Guaranteed Minimum; 50 Units Estimated Maximum 2012 Co-occurring Intake Assessment & Report - 1 Units Guaranteed Minimum; 23 Units Estimated Maximum 2020 Substance Use Disorder Group Counseling - 60 Units Guaranteed Minimum; 1200 Units Estimated Maximum 2030 Substance Use Disorder Relationship and Parenting Counseling - 1 Units Guaranteed Minimum; 18 Units Estimated Maximum Mental Health: 5001 Mental Health Treatment Planning & Follow-up – 5 Units Guaranteed Minimum; 63 Units Estimated Maximum 5005 Mental Health Intake Screening – 3 Units Guaranteed Minimum; 38 Units Estimated Maximum 5011 Mental Health Intake Assessment & Report – 5 Units Guaranteed Minimum; 63 Units Estimated Maximum 5030 Psychiatric Evaluation & Report – 5 Units Guaranteed Minimum; 75 Units Estimated Maximum 6000 Crisis Intervention Evaluation & Report – 1 Unit Guaranteed Minimum; 5 Units Estimated Maximum 6010 Mental Health Individual Counseling – 90 Units Guaranteed Minimum; 1000 Units Estimated Maximum 6031 Mental Health Relationship and Parenting Counseling – 1 Units Guaranteed Minimum; 18 Units Estimated Maximum 6051 Medication Monitoring & Report – 5 Units Guaranteed Minimum; 125 Units Estimated Maximum Sex Offender Treatment (SOT): 5012 Sex Offender Intake Assessment & Report - 1 Unit Guaranteed Minimum; 15 Units Estimated Maximum 6001 Sex Offender Treatment Disorder Treatment Planning & Follow-up – 1 Unit Guaranteed Minimum; 15 Units Estimated Maximum 6005 Sex Offender Intake Screening - 1 Unit Guaranteed Minimum; 13 Units Estimated Maximum 6012 Sex Offender Individual Counseling - 1 Units Guaranteed Minimum; 240 Units Estimated Maximum 6022 Sex Offender Group Counseling – 2 Units Guaranteed Minimum; 360 Units Estimated Maximum Services The contractor shall be capable of providing outpatient substance use disorder and mental health treatment services to offenders confined in community-based programs in Rapid City, South Dakota area. These services shall be in accordance with the Federal Bureau of Prisons (BOP) Community Treatment Services (CTS) Statement of Work, dated September 2022. The period of performance is for a one-year base period estimated to begin on December 1, 2026 with four (4) one-year option periods, with services ending (if all options years are renewed) on November 30, 2030. These services required for this contract include a Base Year, Option Year One, Option Year Two, Option Year Three, and Option Year Four. Place of Performance Services are needed within a 10-mile radius of the U.S. Post Office at 500 East Boulevard, Rapid City, SD, 57701 and within a half (1/2) mile walk to a local public transportation stop. All references to Residential Re-Entry Center (RRC) and Community Correctional Center (CCC) shall be treated equally for the purpose of this contract. Deliveries In accordance with Federal Acquisition Regulation (FAR) 16.505, and the clause located in FAR 52.216-18, Ordering, states that any supplies or services to be furnished under this contract shall be ordered by issuance of task orders by a warranted Contracting Officer in the CTS Contracting Office. Freedom of Information Act The Freedom of Information Act (FOIA) and its amendments have resulted in an increasing number of requests to Federal Agencies for copies of Technical/Management and Business Proposals from other than Government sources. The offeror should identify information in its Technical/Management and Business Proposals the offeror believes should be withheld from these sources, on the basis the proposals consist of "trade secrets and commercial or financial information obtained from a person and privileged or confidential" (exemption (b) (4) of the FOIA). This identification will assist in the decision by a responsible federal official to disclose or withhold the requested information. If an offeror considers elements of its proposal to be exempt under FOIA, ensure the following notice is annotated on the title page of the quote: Elements of this document, as identified on individual pages, are considered by the submitter to be privileged or confidential trade secrets or commercial or financial information not subject to mandatory disclosure under the Freedom of Information Act. Material considered privileged or confidential on this basis is contained on pages ____. The offeror must annotate each individual item it considers privileged or confidential under the FOIA exemption with the following notice: The data or information is considered confidential or privileged, and not subject to mandatory disclosure under the FOIA. All information in an offeror's quote not designated may be subject to automatic public disclosure if it is requested under the FOIA. It must be emphasized that under the FOIA no information is automatically exempt from public disclosure. However, no disclosures will be made without careful evaluation, giving due regard to the need for safeguarding material considered privileged or confidential by the offeror. It is Department of Justice policy to withhold whenever possible material that is genuinely privileged or confidential. Billing Information The Government will make payment on a monthly basis via Electronic Fund Transfer. Invoices with the contract number should be submitted electronically to BOP-RSD-CRBCTS-BILL-KC-S@bop.gov. Contractors that are classified as a small business are required to indicate their small business size status on each invoice submitted for payment. Award Without Discussions Award will be made to the quoter whose quotation offers the best value to the government, considering technical capability and lowest price technically available. Quoters are advised an award may be made without discussions. The Contracting Officer cannot overemphasize the necessity for the initial quotation of a quoter to provide the Government with sufficient information identifying the quoter's best terms from a cost or price and technical standpoint. Community Treatment Services Decisional Rule Criteria Lowest Price Technically Acceptable: Each quotation will be initially reviewed to determine that all document submission requirements listed under Addendum to FAR 52.212-1, Instructions to Offerors-Commercial Items, are met. By using the documentation submitted with each quotation, an initial review will also be conducted to determine whether it meets the minimum requirements contained in the Decisional Rule Criteria below. Any quotation not meeting these criteria shall not receive consideration for award. Quotes must clearly demonstrate at the time of submission, unless otherwise stated, the capability to meet the Decisional Rule Criteria below. Quotes will be rated "Acceptable" or "Unacceptable" based on the Decisional Rule Criteria. Quoters receiving an "Unacceptable" rating will be advised of their elimination from the procurement. Quoters receiving an "Acceptable" rating shall be considered for award. Quoters who fail to furnish any of the submission requirements below shall be excluded from consideration: Staffing Requirement – Key Personnel: The Quoter must have key personnel to meet the solicitation requirements. The Quoter must ensure all personnel providing clinical services to Bureau offenders meet the experiential, educational, and appropriate licensure/certification as required by the state authority where the services will be rendered. [SOW 5.1] Submit the Technical Personnel document that identifies the position and responsibility of all personnel proposed to meet the minimum staffing requirements of key personnel in table 1a below. [SOW 5.2] All key personnel, authorized negotiator(s), and administrative positions must be identified and listed in this document. Listing only one key personnel to provide all required counseling services in the solicitation is not acceptable and does not meet the requirements of this subfactor. Note: Key personnel listed in a separate document created by the Quoter is not acceptable and does not meet the requirements of this subfactor. Submit copies of current and valid professional licenses for key personnel who will provide direct clinical services (counseling or medication) to Bureau offenders. Clinical licenses submitted for counseling services must be listed in table 1b below and must correspond to the respective clinical duties performed. All copies of professional licenses and license verification sheets must clearly show the applicable state licensing board and the expiration date on the submitted document. [SOW 5.4] Staff licenses for medical staff (e.g., medical doctor, physician assistant, nurse practitioner) must meet the standards of practice established by the applicable state’s professional regulatory board in the state where services will be rendered. If submitting a non-medical license that is not listed in table 1b, complete the Mental Health/Behavioral Health Professionals Scope of Practice Summary. Any licenses other than those listed below will be reviewed on a case-by-case basis. If unable to produce an original license, provide a license verification sheet with a copy of a current government-issued photo identification card for the staff member. Submit resumes for key personnel listed on the Technical Personnel document proposed to provide direct clinical services for counseling services only. Resumes must show documented experience working with a criminal justice population providing substance use disorder, mental health, or sex offender treatment services. Documented experience on a resume must include brief descriptions of the type of clinical services provided working with a criminal justice population. [SOW 5.3] Submit the Clinical Experience document for all key personnel who will be providing direct clinical services for counseling services only and list total clinical experience working with a criminal justice population providing substance use disorder, mental health, or sex offender treatment services. The Clinical Experience document must correspond to information submitted in the resumes, as to the type and number of years’ experience working with a criminal justice population. Submit a Drug Enforcement Agency Controlled Substance Registration Certificate for a qualified practitioner with prescriptive authority who meets the standards of practice established by the state’s professional regulatory board to provide psychiatric evaluations, medication monitoring, and follow-up services. [SOW 5.4.5] Operational Requirement – Cognitive Behavioral Therapy (CBT): The Quoter must demonstrate adherence to the CBT model of treatment or other evidence-based programming compatible with CBT. [SOW 2.2] Submit two cognitive behavioral methods or techniques that will be used with Bureau offenders in the delivery of Community Treatment Services (CTS). Limit response to listing the methods or techniques that will be used; do not provide explanations or descriptions of the methods or techniques, unless not a widely known form of treatment. [SOW 2.2.1] Operational Requirement – Crisis Interventions: The Quoter must provide emergency crisis intervention assessments, when necessary. The Quoter must have the ability to provide a crisis intervention evaluation and submit a report, contract line item number (CLIN) 6000, within 24 hours of the request made by CTS staff. [SOW 4.3.9] Identify on the Technical Personnel document which key personnel can conduct a comprehensive diagnostic interview and provide the written report within 24 hours of referral for emergency crisis interventions. Facility Requirement – Proposed Location(s): The Quoter must provide treatment at performance sites that meet the specified restrictions, space requirements, ADA compliance guidelines, and that do not present safety risks to the community. [SOW 7.1 & 7.2.1] List addresses for all proposed performance sites, including subcontractors, where the following services will be provided: Substance Use Disorder, Mental Health, and Sex Offender Treatment Services, which must be within a 10-mile radius of the U.S. Post Office at 500 East Boulevard, Rapid City, SD, 57701 and within a half (1/2) mile walk to local public transportation. Submit a lease, option or intent to lease, an office service agreement or option, a deed, bill of sale, or option to buy, in the name of the Quoter, or subcontractor if applicable, for all addresses listed in 4a. Documents submitted for a lease, option or intent to lease or an office service agreement or option must meet the following requirements: Acceptable proof of a lease, option or intent to lease, or an office service agreement or option, must address, at a minimum, the following provisions: names of the parties (landlord, management company, or provider and prospective tenant) proposed or current terms of lease or agreement, including termination terms, and desired or current start and end dates property details of the location for an option or intent to lease must include condition of premises, i.e., space is being leased in “AS IS” condition or will require either party to build out the space property details for an office service agreement option must define the workspace via specific desk counts, private office numbers, or shared, non-exclusive areas, and any included services like internet, utilities, and reception signature of both parties Month-to-month terms are not acceptable for a proposed performance site on a lease, or an option or intent to lease, or on an office service agreement or option. A lease, or option or intent to lease, or an office service agreement or option, on a one-year (12 months) term or less must also include an assurance statement, signed by the authorized negotiator and dated, which provides a contingency plan to secure a new location, without any interruption in services, if the need should arise. When the Quoter is using a subcontractor to deliver the required services at subcontractor’s proposed performance site, Quoter must submit a lease, option or intent to lease, an office service agreement or option, a deed, bill of sale, or option to buy in the name of the subcontractor for all addresses listed in 4a. The lease, option or intent to lease, office service agreement or option, deed, bill of sale, or option to buy must clearly show the subcontractor, by their signature on the document submitted, as the tenant, potential tenant, owner, or potential owner of the proposed performance site. A service or lease agreement between the Quoter and the subcontractor is not acceptable when the subcontractor has a lease, option or intent to lease, office service agreement or option, with a third party, i.e., a landlord, management company, or provider. A service or lease agreement between the Quoter and the subcontractor will be acceptable when the subcontractor has a deed, bill of sale, or option to buy a proposed performance site. Quoter must then submit the deed, bill of sale, or option to buy proposed performance site in the name of the subcontractor as proof of ownership or potential ownership and a service or lease agreement or option which meets all elements in i, ii, and iii. Provide the methods and means that will be used to ensure individual and group rooms are private and allow for confidentiality during treatment sessions. [SOW 7.1.1] Submit an office diagram for each proposed performance site listed in 4a. The diagram must identify all rooms that will be used for counseling space and services, i.e., individual, group, or psychiatric treatment rooms, as well as space used for a waiting, lobby or reception area. The location of the restroom facilities should also be identified. [SOW 7.1.1] Specify on the office diagram the number of individuals each group room can comfortably accommodate. Therapeutic group rooms must be primarily dedicated to treatment or reserved for outpatient community treatment services. Complete and submit the Americans with Disabilities Act (ADA) Checklist for each proposed performance site listed in 4a. [SOW 7.1.1] Complete and submit the Office Service Agreement (OSA) Checklist for each proposed performance site listed in 4a which will be under an office service agreement. The document must assess risks primarily related to security, data protection, oversight, and contract compliance. The OSA Checklist must include a plan to mitigate any risks identified at the proposed performance site (office workspace). Submit a listing, e.g., a directory, of all businesses located on the same floor as the proposed performance site (office workspace). Complete and submit the Local Areas of Concern document for each proposed performance site listed in 4a. This document must identify the following areas of concern that are within 500 feet, which must also include the same space and/or same building, of each proposed performance site: Schools, day-care centers, playgrounds, developed or improved parks, athletic fields, churches, school bus stops, and any facilities/businesses that primarily care for/educate/entertain minors or other vulnerable populations. [SOW 7.2.1] The LAC document must include a plan to mitigate risk to children and other vulnerable populations for each area of concern identified, as applicable. Submit evidence to show a review of the area around each proposed performance site was completed, e.g., a screenshot or pdf printout of each proposed performance site location pinned on a digital map which clearly shows the surrounding area within a 500 foot radius. Facility Requirement – Facility License: The facility must be appropriately licensed and/or certified to provide all required services on, or by, the contract effective date by the state authority where services will be rendered. [SOW 7.4] Submit the required state facility license or certification to provide all treatment services at the proposed performance site(s) listed in 4a. If in the process of obtaining a valid license or certification, submit the completed application, provisional license or certification, official email correspondence, and/or other official documentation as proof. Documentation must show that the Quoter may begin services on, or by, the contract effective date. Providing only the email for submitting the application is not acceptable and does not meet the requirements of this subfactor. Documentati...
United States
Due Oct 8, 2026View bid
SAM.govCloses today
Minot Air Force Base Multiple Award Construction Contract (MACC) IDIQ
This is a Request for Proposal (RFP) for commercial, non-personal services prepared in accordance with Revolutionary Federal Acquisition Overhaul (RFO) Part 12 "Acquisition of Commercial Products and Commercial Services", Part 15 "Contracting by Negotiation", and Part 36 "Construction and Architect-Engineer Contracts" procedures. This acquisition is 100% set aside for Small Business Concerns. The North American Industry Classification System (NAICS) code associated with this requirement is 236220 "Commercial and Institutional Building Construction". The Small Business Size Standard associated with this NAICS is $45,000,000.00. The 5th Contracting Squadron, Minot Air Force Base (AFB), North Dakota, is requesting proposals to establish the base award(s) for a Minot AFB Multiple Award Construction Contract (MACC), Indefinite Delivery Indefinite Quantity (IDIQ) vehicle. The MACC IDIQ will fulfill a continuous and recurring need for a broad range of design-bid-build and design-build construction projects to support the missions of the 5th Bomb Wing, 91st Missile Wing, and multiple tenant units assigned to Minot AFB. There is no seed project included with this solicitation. The MACC will have an initial five (5)-year ordering period with one (1), five (5)-year optional ordering period. The total aggregate maximum amount expendable under the entire MACC lifecycle SHALL NOT EXCEED $500,000,000.00. The guaranteed minimum amount over the life of the MACC is $500.00. The awardees' guaranteed minimum will be satisfied by attendance at the MACC Post-Award Conference. NOTICE TO OFFERORS (AVAILABILITY OF FUNDS): Funds are not available for the minimum guarantee. Award under this solicitation is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. The Government reserves the right to cancel this solicitation at any time. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs. The complete solicitation package is available in this posting. Anyone wishing to participate in this proposed procurement must obtain their copy from this website. Copies will not be distributed from the Contracting Office. All amendments will be posted on SAM.gov. Contractors are solely responsible for obtaining amendments from this site to update files. The complete solicitation package includes eight (8) attachments: 1. MACC Statement of Work 2. MACC Ordering Guide 3. MACC Specifications 4. Section L - Instructions to Offerors 5. Section M - Evaluation Factors for Award 6. Davis-Bacon Act Wage Determinations 7. Financial Responsibility Authorization Letter 8. Subcontractor Consent Letter 9. Questions and Answers (Q&A) 10. Past Performance Portfolio NOTICE TO OFFERORS (MANDATORY SAM REGISTRATION): All prospective contractors must be registered and active in the System for Award Management (SAM) at time of receipt of proposals. Failure to be active and registered in SAM will cause your firm to be ineligible for award. Offerors are highly encouraged to thoroughly review all solicitation documents prior to submitting their proposal. All responsible sources may submit a proposal which will be considered by the agency. All contractors’ questions in response to this solicitation must be emailed to 5CONS.PKA-C.MACC@us.af.mil no later than 31 August 2026 at 10:00 AM CDT. The Government will not be held responsible for answering any questions after this time. All questions/answers resulting from this solicitation will be posted to SAM.gov as an amendment. ***AMENDMENT 3*** This amendment incorporates Attachment 10 - Past Performance Portfolio; updates Attachment 4 - Section L, Attachment 5 - Section M, and Attachment 9 - Q&A, reformats the SF 1442 and Amendment SF30s to remove password protection, and reformats Attachment 8 to remove CUI markings. This amendment also updates Section J in the SF1442 to align with the most current versions of the attachments. A conformed SF 1442 and SF 30 for this amendment have been included in this SAM posting. ***AMENDMENT 2*** This amendment uploads questions and answers, updates section L, Update Section J in the SF1442 to align with most current versions of attachments, upload conformed SF 1442 and SF 30 into this solicitation attachments. ***AMENDMENT 1*** This amendment uploads questions and answers, updates sections L & M, updates the MACC Ordering Guide, updates the MACC SOW and pushes proposals due for 8 October 2026.
Minot AFB
Due Oct 8, 2026View bid