Skip to content
SAM.govCloses in 15 days

Grease Trap and Used Cooking Oil Containment Services

Location
Edwards, United States
Responses due
Oct 23, 2026

Overview

Solicitation Amendment 1: This Amendment 1 is issued to correct Attachments 3 and 4. The Evaluation RFO 52.212-1 and -2 Addedndum (Attachment 3) mistakenly had incorrect information in some sections and is hereby updated (all edits shown in that updated attachment with teal highlights). The Past Performance Questionnaire (Attachment 4) was edited to reflect correct the due date time to 4:00 PM PDT (the edit is shown with a green highlight). Offerors are directed to discontinue the use of Attachments 3 & 4 from the initial post and to utlize the updated attachments (both have file names reflecting a 25 Sep 2026 update). Note, Offerors who submit the origional version of Attachment 4 will be accepted. Lastly, the section below titled "APPLICABLE LABOR LAWS" was updated to revled applicable labor laws. No other changes were made with this Ammendment 1. This is a combined synopsis/solicitation for commercial services in accordance with the format in Revolutionary Federal Acquisition Regulation Overhaul (RFO) Subpart 12.202(b)(1), as supplemented with additional information included in the notice. This announcement constitutes the only solicitation; quotes are being requested, and a separate solicitation will not be issued. Solicitation number FA930126Q0034 is issued as a Request for Quotation (RFQ) to Offerors. Please review all solicitation documentation for complete instructions and requirement information. Interested parties who believe they can meet the requirements for the services described in this solicitation are invited to submit a completed quote. Offerors are required to submit with their response enough information for the Government to evaluate the minimum requirements detailed in the solicitation. Any information provided in response to this solicitation is strictly voluntary; the Government will not pay for information submitted in response to this solicitation. Offerors are to reference the Solicitation Number FA930126Q0034 on all documents that they submit to the Government. Award will be made using the criteria in RFO 52.212-2 and its Addendum (Attachment 3). Offerors who submit quotes which are missing data or information which is requested herein will be deemed unresponsive and will not be considered for award. Please ensure your company completely provides all information requested herein. DESCRIPTION OF SERVICES The Contractor shall provide labor, supervision, transportation, tools, equipment and supplies necessary to provide grease trap and used cooking oil containment system maintenance located at Edwards AFB. This contract will include the pumping, cleaning, and inspection of grease traps, servicing of used cooking oil containment vessels, emergency service calls, and all associated waste transportation and disposal CONTRACT TYPE The anticipated contract type is Firm Fixed-Price, Indefinite Delivery Indefinite Quantity. One award will be issued. PERIOD OF PERFORMANCE 01 November 2026 - 30 September 2031 NOTICE TO OFFEROR(S) Funds are not presently available for this effort. No order will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs. Defense Priorities and Allocation System (DPAS): N/A This acquisition is set-aside to eligible small businesses under NAICS 562998, All Other Miscellaneous Waste Management Services with a size standard of $16,500,000.00. Quotes received from Offerors not represented as a small business will be rejected. The Government reserves the right to reject an Offeror’s quote submission without notice should the Offeror not meet the set-aside requirements. Applicable RFO and R-DFARS provisions and clauses are posted within the with the Solicitation Model Contract (Attachment 6). RFO clause at 52.212-4, Contract Terms and Conditions-Commercial Products and Commercial Services, applies to this acquisition and any addenda to the clause. INTERESTED CONTRACTORS CAN ACCESS THE CLAUSES BY INTERNET URL: https://www.acquisition.gov. TO REGISTER WITH SYSTEM FOR AWARD MANAGEMENT (SAM), GO TO URL: https://www.sam.gov/. APPLICABLE LABOR LAWS This solicitation is subject to the Service Contract Act WD 2015-5603, Revision 32, dated 08/27/2026. The most updated wage determination can be found at https://sam.gov/wage-determinations. SITE VISIT A site visit will take place on 05 October 2026, starting promptly at 12:00 PM PDT. Offerors are STRONGLY encouraged to ensure that factor in enough time to gain their base pass if required, as the Site Visit start will not be dlayed due to a tardy attendee. The following information must be submitted via email ONLY to BOTH the Contracting Officer (joshua.vasquez.5@us.af.mil) and the Contract Specialist (jewels.mesa@us.af.mil) by 12:00 PM PDT on 29 September 2026 to be eligible to attend the Site Visit. This information is required for each participant, and a max of two (2) people per Offeror is allowed. Full Name: DOB: DL# / State of Issuance: Last 4 SSN: Country of Birth: Citizenship Status: Examples (U.S. Citizen, Permanent Resident Card (Green Card), U.S. Work Visa (EAD), Visitor/Tourist Visa, School/Student Visa, None) Current registration and insurance for any vehicle and a REAL ID. The Edwards AFB Visitor Control Center has advised that if participants do not have a Real ID by Wednesday (7 May 25), then they will need to bring a combination of either their Passport + Driver’s License or Birth Certificate (original copy) + Driver’s License + SSN Card in order to receive access to the base. If a proposed participant already retains base access and does NOT require a base pass to attend the Site Visit, the Offeror shall submit that individuals name ONLY. The Offeror is directed NOT to submit the information in the bullets above for participant(s) that already have base access. QUESTIONS DUE DATE AND TIME Questions are due no later than 12 October 2026 at 12:00 PM PDT. The Government will post an amendment to this combined synopsis/solicitation as soon as possible after the due date for questions, in that amendment will be all questions and the Governments answers to those questions. The Government reserves the right to NOT answer questions that are not submitted timely. All questions are to be submitted via email ONLY, telephone or in-person questions will not be accepted or answered. OFFER DUE DATE AND TIME Quote submissions (all volumes) are to be addressed to Air Force Test Center (AFTC), Directorate of Contracting – AFTC/PZIOB, 5 South Wolfe Avenue Building 2800, Edwards AFB, CA 93524, and are to be sent via email ONLY to BOTH the Contract Specialist (SSgt. Jewels Mesa, jewels.mesa@us.af.mil) and the Contracting Officer (Mr. Joshua Vasquez, joshua.vasquez.5@us.af.mil). Quote Submissions are due no later than 23 October 2026 at 4:00 PM PDT. No hand delivered or mailed quote submissions will be accepted, only emailed responses will be considered or evaluated and are to be sent to both the Contracting Officer and Contract Specialist identified previously.

Source: SAM.govView in Constructeams

Similar open bids

LA RAMPCloses today

2710050 WALNUT PARK ES STAIR REPLACEMENT

STAIR REPLACEMENT

California
Due Oct 8, 2026View bid
LA RAMPCloses today

BEST VALUE | RFQ/BID #2710058 GLENFELIZ EEC | OUTDOOR CLASSROOM & CAMPUS UPGRADE (BV)(PSA)

GLENFELIZ EARLY EDUCATION CENTER | OUTDOOR CLASSROOM & CAMPUS UPGRADE (BV)(PSA)

California
Due Oct 8, 2026View bid
SAM.govCloses today

Government is conducting market research to identify qualified commercial HVAC contractors.

The Government is conducting market research to identify qualified commercial HVAC contractors capable of providing an HVAC solution for an existing facility. The Government's objective is to maximize use of existing building infrastructure where technically feasible rather than perform unnecessary demolition or complete replacement. Interested contractors should have experience evaluating existing HVAC infrastructure and developing retrofit solutions that may incorporate or interface with existing ductwork, electrical systems, controls, structural components, roof/wall penetrations, condensate systems and mechanical spaces. Contractors should be capable of conducting a site survey and recommending a technically acceptable solution that addresses equipment sizing, zoning, energy efficiency, compatibility with existing systems, controls integration, installation requirements and long-term maintainability.

Port Hueneme CBC BasePlumbing · HVAC Mechanical
Due Oct 8, 2026View bid
SAM.govCloses today

KB Duct List

Salient Characteristics SpecificationTitle: Galvanized Steel Quick-Disconnect Ductwork and Components for Air-Conditioning SystemSubject: Supply of modular galvanized steel quick-disconnect ductwork, fittings, dampers, and support hangers.Basis of Design: The part numbers below are for reference and configuration cross-reference. Products offered may be from another acceptable manufacturer, provided they meet or exceed all salient characteristics and are fully compatible with the complete ductwork system.1. Scope and PurposeThis requirement is for the supply and delivery only of galvanized steel, modular quick-disconnect ductwork and associated fittings for an air-conditioning system. The supplied components shall form a mutually compatible duct system consisting of straight duct sections, reducers, wye connectors, elbows, airflow dampers, and saddle hangers.Installation, field fabrication, field welding, and connection to existing equipment are not included unless specifically added elsewhere in the solicitation.2. General Salient Characteristics. All offered items shall meet the following minimum requirements: Material: Items 1 through 26 shall be galvanized steel only. No stainless steel, aluminum, plastic, or uncoated carbon-steel substitutes shall be accepted.System Compatibility: All duct, fittings, dampers, and hangers shall be compatible with the specified quick-disconnect duct system. Components of the same nominal duct diameter shall connect directly without adapters, field welding, rivets, sheet-metal screws, or permanent field modification.Quick-Disconnect Connection: Straight duct sections, reducers, wye connectors, elbows, tees, and dampers shall use a quick-disconnect connection configuration compatible with the remaining supplied components. Connection features shall permit assembly and disassembly of the duct system without damage to the duct or fittings.Nominal Dimensions: Duct diameters and fitting dimensions listed in the schedule are nominal inside diameters unless the manufacturer???s standard quick-disconnect system identifies dimensions differently. Reducers shall transition between the listed inlet and outlet diameters. Fittings shall be sized to directly mate with the corresponding duct diameter.Gauge Requirements: Straight duct sections and dampers shall be 20-gauge galvanized steel where identified in the schedule. Reducers, elbows, wye connectors, tees, and 90-degree fittings shall be 18-gauge galvanized steel where identified in the schedule. Saddle hangers shall be 14-gauge galvanized steel where identified in the schedule.Quality and Condition: Products shall be new, free of corrosion, dents, sharp edges, cracks, deformation, damaged coating, or manufacturing defects that would prevent proper assembly or service. Duct sections shall be round, and fittings shall retain their intended shape to allow proper connection. Components shall be packaged and shipped to prevent damage or distortion in transit.Equal Products: An offered equal product shall meet every listed dimensional material, gauge, connection, configuration, and quantity requirement. The offeror shall provide manufacturer specifications or product literature sufficient to verify compliance when requested.3. Required Items ScheduleItem. Required Item / Salient Characteristics. Minimum Material / Gauge. Qty. Reference No.*1. Quick-disconnect straight duct, nominal 24-inch diameter. Galvanized steel, 20 ga 17 EA 10024.2. Quick-disconnect reducer, 24-inch inlet to 22-inch outlet Galvanized steel, 18 ga 5 EA 16024.3. Quick-disconnect straight duct, nominal 22-inch diameter Galvanized steel, 20 ga 20 EA 10022.4. Quick-disconnect reducer, 22-inch inlet to 20-inch outlet Galvanized steel, 18 ga 5 EA 16022.5. Quick-disconnect straight duct, nominal 20-inch diameter Galvanized steel, 20 ga 17 EA 10020.6. Quick-disconnect reducer, 20-inch inlet to 18-inch outlet Galvanized steel, 18 ga 5 EA 16020.7. Quick-disconnect 45-degree wye connector, nominal 24-inch duct size Galvanized steel, 18 ga 1 EA 14224.45.8. Quick-disconnect 45-degree elbow, nominal 22-inch duct size Galvanized steel, 18 ga 1 EA 12022.45.9. Quick-disconnect manual butterfly valve airflow damper, nominal 22-inch duct size Galvanized steel, 20 ga 1 EA 19422.10. Quick-disconnect straight duct, nominal 18-inch diameter Galvanized steel, 20 ga 28 EA 10018.11. Quick-disconnect tee, 18-inch ?? 18-inch ?? 18-inch Galvanized steel, 18 ga 1 EA 14318.12. Quick-disconnect straight duct, nominal 16-inch diameter Galvanized steel, 20 ga 19 EA 10016.13. Quick-disconnect reducer, 18-inch inlet to 16-inch outlet Galvanized steel, 18 ga 3 EA 16018.14. Quick-disconnect 45-degree elbow, nominal 16-inch duct size Galvanized steel, 18 ga 2 EA 12016.45.15. Quick-disconnect manual butterfly valve airflow damper, nominal 16-inch duct size Galvanized steel, 20 ga 2 EA 19416.16. Quick-disconnect 90-degree elbow, nominal 20-inch duct size Galvanized steel, 18 ga 2 EA 12020.90.17. Saddle hanger sized for nominal 24-inch duct Galvanized steel, 14 ga 14 EA 17024.18. Saddle hanger sized for nominal 22-inch duct Galvanized steel, 14 ga 14 EA 17022.19. Saddle hanger sized for nominal 20-inch duct Galvanized steel, 14 ga 14 EA 17020.22. 16-inch galvanized clamp with white nitrile gasket, 27 EA 13016-GA-N.23. 18-inch galvanized clamp with white nitrile gasket, 30 EA 13018-GA-N.24. 20-inch galvanized clamp with white nitrile gasket, 25 EA 13020-GA-N.25. 22-inch galvanized clamp with white nitrile gasket, 28 EA 13022-GA-N.26. 24-inch galvanized clamp with white nitrile gasket, 24 EA 13024-GA-N.*Reference numbers are not brand-name requirements and are included only to identify the intended configuration and compatibility standard. Galvanized Ducting shall be Standard 5-feet Lengths and 11-inch Galvanized Standard Adjustable Sleeves where applicable.4. Component-Specific Requirements shall be galvanized steel:4.1 Saddle Hangers (items 17-21) used for handing duct systems and reducing sway Shall be nominal 24-inch diameter 14 ga 14 EA 17024, 22-inch diameter 14 ga 14 EA 17022, 20-inch diameter 14 ga 14 EA 17020, 18-inch diameter 14 ga 18 EA 17018, or 16-inch diameter 14 ga 14 EA 17016, as identified in the item schedule. Shall use the required quick-disconnect end configuration.4.2 Reducers Shall be galvanized steel, 18 gauge. Shall provide the listed nominal transitions: 24 x 22 inches, 22 x 20 inches, 20 x 18 inches, and 18 x 16 inches. Shall have quick-disconnect ends compatible with the adjoining duct sections.4.3 Elbows, Wye Connector, and Tee, shall be galvanized steel, 18 gauge. Shall have the listed nominal diameter and directional configuration. The wye connector and applicable elbows shall be 45 degrees as listed. The 20-inch elbow shall be 90 degrees. The tee shall be 18 inches ?? 18 inches ?? 18 inches. All ends shall be compatible with the required quick-disconnect duct system.4.4 Airflow Dampers Shall be galvanized steel, 20 gauge. Shall be sized for 22-inch or 16-inch nominal quick-disconnect duct, as identified in the item schedule. Shall be suitable for controlling airflow within the compatible duct system. 4.5 Saddle Hangers Shall be galvanized steel, 14 gauge. Shall be contoured and sized to support the corresponding nominal duct diameter without crushing, deforming, or damaging the duct. Shall be suitable for attachment to the Government???s selected overhead support method. 5. Inspection and Acceptance the Government may inspect delivered items for: Correct item type, nominal size, gauge, and quantity; Galvanized-steel construction; Compatibility of quick-disconnect connections among offered components; Required elbow, wye, tee, reducer, damper, and hanger configurations; Damage, deformation, corrosion, or deficient protective packaging; and Manufacturer literature or other documentation supporting compliance with the salient characteristics. Items that do not meet the stated requirements may be rejected.

United States
Due Oct 8, 2026View bid
SAM.govCloses today

Sources sought for Blood and Blood Products for QNBMHF in Belcourt ND 58316.

Sources Sought: Provide blood and blood products to the Quentin N. Burdick Memorial Healthcare Facility (QNB) in Belcourt North Dakota. Sources Sought Notice Number: IHS-SS-26-1524548 This Sources Sought Notice is for informational and planning purposes only and shall not be construed as a solicitation, an obligation or commitment by the Indian Health Service. This notice is intended strictly for market research to determine the availability of small businesses. Your responses to the information requested will assist the Government in determining the appropriate acquisition method, including whether a set-aside is possible. The anticipated applicable NAICS code for this acquisition is 541380, Testing Laboratories and Services- other relevant NAICS codes will be considered based on responses received (such as conference centers, etc.) 1.0 BACKGROUND The IHS is an agency within the Department of Health & Human Services and is responsible for providing federal health services to American Indians and Alaska Natives. The Indian Health Service provides a comprehensive health service delivery system for approximately 1.9 million American Indians and Alaska Natives who belong to 567 federally recognized tribes, in 35 states. The Indian Health Service Headquarters is located in Rockville, MD and then divided into twelve (12) physical areas: Alaska, Albuquerque, Bemidji, Billings, California, Great Plains, Nashville, Navajo, Oklahoma, Phoenix, Portland, and Tucson. The Great Plains Area Office (GPAO) works in conjunction with 19 Indian Health Service Units and Tribal Managed Service Units to provide health care to approximately 130,000 Native American located in North Dakota, South Dakota, Nebraska, and Iowa. QNBMHCF falls under the GPAO and provides medical care to approximately 14,550 tribal members living on the Turtle Mountain Indian Reservation. The Service Unit was built in 1967 with renovation and clinic expansion completed in 1992, to provide an expanded level of outpatient health care services specifically designed to meet the needs of our population. Services include: 24 Hour Emergency Services, Laboratory, Radiology (CAT Scan & Mobile MRI) and 24-Hour Pharmacy Services, Optometry, Dental, Clinic, Emergency, Podiatry, Same Day Clinic, and Behavioral Health. 2.0 SCOPE Provide QNB with blood and blood products. These products will be used to provide direct patient care in our ER, OR, and OB wards. This firm-fixed-price Purchase Order will be for one base year and 4 option years. Vendor will ship out new Red Blood Cell (RBC) stock every two to three weeks. Old stock will be shipped back to the vendor when new stock arrives. Plasma and Platelets will be sent on an as needed basis. Packed red blood cells will be automatically delivered every two to three weeks. 3.0 TYPE OF ORDER This is a firm fixed price purchase order. 4.0 ANTICIPATED PERIOD OF PERFORMANCE Period of Performance: Base + 4 option years 5.0 PLACE OF PERFORMANCE Quentin N Burdick Memorial Health Care Facility 1300 Hospital Loop Belcourt, ND 58316 6.0 REPORT(S)/DELIVERABLES AND DELIVERY SCHEDULE Delivery Location: Quentin N. Burdick Memorial Health Care Facility Belcourt, ND 58316 7.0 PAYMENT IPP Invoice clause: HHSAR 352.232-71 Electronic Submission of Invoice Payment Requests (Feb 2022) (a) Definitions. As used in this clause- Payment request means a bill, voucher, invoice, or request for contract financing payment with associated supporting documentation. The payment request must comply with the requirements identified in FAR 32.905(b), "Content of Invoices" and the applicable Payment clause included in this contract. (b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests electronically using the Department of Treasury Invoice Processing Platform (IPP) or successor system. Information regarding IPP, including IPP Customer Support contact information, is available at www.ipp.gov or any successor site. (c) The Contractor may submit payment requests using other than IPP only when the Contracting Officer authorizes alternate procedures in writing in accordance with HHS procedures. (d) If alternate payment procedures are authorized, the Contractor shall include a copy of the Contracting Officer's written authorization with each payment request. (END OF CLAUSE) Unless otherwise agreed to by the contracting officer per HHSAR 352.232-71(c), the use of IPP shall take precedence over previously established invoicing procedures." In compliance with the Office of Management and Budget (OMB) M-15-19 memorandum Improving Government Efficiency and Saving Taxpayer Dollars Through Electronic Invoicing directing Federal agencies to adopt electronic invoicing as the primary means to disburse payment to vendors. Invoices submitted under any award resulting from this solicitation will be required to utilize the Invoice Processing Platform (IPP) in accordance with HHSAR 352.232-71, Electronic Submission and Processing of Payment Requests IPP is a secure, web-based electronic invoicing system provided by the U.S. Department of the Treasurys Bureau of the Fiscal Service, in partnership with the Federal Reserve Bank of St. Louis (FRSTL). If your organization is already registered to use IPP, you will not be required to re-register- however, we encourage you make sure your organization and designated IPP user accounts are valid and up to date. The IPP website address is: https://www.ipp.gov If you require assistance registering or IPP account access, please contact the IPP Helpdesk at (866) 973-3131 (M-F 8AM to 6PM ET), or IPPCustomerSupport@fiscal.treasury.gov 8.0 Capability Statement/Information: Interested parties are expected to review this notice to familiarize themselves with the requirements of this project. Failure to do so will be at your firm’s own risk. The following information shall be included in the capability statement: 1. A general overview of the respondents’ opinions about the difficulty and/or feasibility of the potential requirement, and any information regarding innovative ideas or concepts. 2. Information in sufficient detail about the respondent’s (a) current capability and capacity to perform the work; (b) prior completed events of similar nature/size; (c) organizational experience and management capability; and (d) examples of prior completed Government contracts and other related information. 3. The respondents’ UEI number, organization name, address, point of contact, and size and type of business (e.g., 8(a), HUBZone, etc.) Pursuant to the North American Industry Classification System (NAICS) code: 541380, Testing Laboratories and Services, or comparable NAICS 4. Any other information that may be helpful in developing or finalizing the requirements of the potential acquisition. 5. The capability statement shall not exceed 10 single-sided pages (including all attachments, resumes, charts, etc.) presented in single-space and using a 12-point font size minimum, in either Microsoft Word or Adobe Portable Document Format (PDF), with 8-1/2 by 11-inch paper size, and 1 inch top, bottom, left and right margins. 6. All proprietary information should be marked as such. Statements should also include an indication of current certified small business status; this indication should be clearly marked on the first page of your capability statement (preferably placed under the eligible small business concern’s name and address). Responses will be reviewed only by IHS personnel and will be held in a confidential manner. 9.0 Closing Statement Point of Contact: Jody Keplin, Purchasing Agent, at Jody.Keplin@ihs.gov Submission Instructions: Interested parties shall submit capability via email to Jody Keplin, at Jody.Keplin@ihs.gov . Must include Sources Sought Number IHS-SS-26-1524548 in the Subject line. The due date for receipt of statements is October 8, 2026 12:00 p.m. Central Time. All responses must be received by the specified due date and time in order to be considered. This notice is for information and planning purposes only and shall not be construed as a solicitation or as an obligation on the part of IHS. IHS does not intend to award a contract on the basis of responses nor otherwise pay for the preparation of any information submitted. As a result of this notice, IHS may issue a Request for Quote (RFQ). THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. However, should such a requirement materialize, no basis for claims against IHS shall arise as a result of a response to this notice or IHS’s use of such information as either part of our evaluation process or in developing specifications for any subsequent requirement. Disclaimer and Important Notes. This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response. The Government reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s qualifications to perform the work. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. After a review of the responses received, a pre-solicitation synopsis and solicitation may be published in SAM.gov. However, responses to this notice will not be considered adequate responses to a solicitation. Confidentiality. No proprietary, classified, confidential, or sensitive information should be included in your response.

Belcourt
Due Oct 8, 2026View bid
SAM.govCloses today

ID-CAMAS NWR- Fuel Tanks Wiring

ID-CAMAS NWR- Fuel Tanks Wiring

United States
Due Oct 8, 2026View bid